February 19, 2010
THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
Revision Date Comment 1.1 19-FEB-2010 Problem Symptom section updated. 1.0 17-FEB-2010 Initial Public Release.
Products Affected M9020 - M9100 - M9200 - M9500 - MDS9000 - MDS9KBS - N5000 - UCS 6100 -
The MDS 9000, Nexus 5000, Nexus 7000 and UCS 6100 families of products will be switching to a new block of Organizationally Unique Identifier (OUI). As a result of this change, customers may experience problems with Cisco Fabric Manager (FM).
This Field Notice applies to units manufactured after February 09, 2010.
The new OUIs will be 00-05-9b and 00-05-73. The first 3 bytes of the MAC address are the OUI.
For information on determining whether a unit is affected, please see the Problem Symptom section.
The Cisco FMS software is currently dependent upon the OUI of the device MAC address to recognize equipment as a Cisco device. The current block of addresses being used for MDS 9000, Nexus 5000, Nexus 7000 and UCS 6100 product families is about to be exhausted.
Cisco Fabric Manager does not recognize a switch with an OUI of 00-05-73 or 00-05-9b as a Cisco switch.
Switches with a new OUI have these issues:
- Traps are not registered
- The switch is not monitored or discovered properly
- Performance Manager does not collect stats from the switch
- The switch is not included in various wizards, such as FCIP, Security Wizard, Upgrade wizard and the IOA wizard.
The first three bytes of the MAC address are the OUI.
To identify whether your hardware is affected, refer to this command table:
MDS 9000 Command show sprom backplane 1 | include "MAC Address" Sample Output switch# show sprom backplane 1 | include "MAC Address"
MAC Addresses : 00-05-9b-01-ca-b2
switch# show sprom backplane 1 | include "MAC Address"
MAC Addresses : 00-05-73-39-01-5a
Nexus 5000 Command show sprom backplane | include "MAC Address" Sample Output switch# show sprom backplane | include "MAC Address"
MAC Addresses : 00-05-9b-a3-81-00
switch# show sprom backplane | include "MAC Address"
MAC Addresses : 00-05-73-a3-81-00
UCS 6100 Commands
- connect nxos
- show sprom backplane | include "MAC Address"
Sample Output BurnIn-A# connect nxos
Cisco UCS 6100 Series Fabric Interconnect
TAC support: http://www.cisco.com/tac
Copyright (c) 2009, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software may be covered under the GNU Public
License or the GNU Lesser General Public License. A copy of
each such license is available at
BurnIn-A(nxos)# show sprom backplane | include "MAC Address"
MAC Addresses : 00-05-73-e6-38-00
BurnIn-B(nxos)# show sprom backplane | include "MAC Address"
MAC Addresses : 00-05-9b-e6-38-00
For MDS 9000, Nexus 5000 and UCS 6100 products that utilize Cisco Fabric Manager, it is necessary to upgrade Fabric Manager software to Fabric Manager Software version 5.0(1a) or Fabric Manager software maintainence version 4.2(3a) or 3.3(4b).
To follow the bug ID link below and see detailed bug information, you must be a registered customer and you must be logged in.
DDTS Description CSCte51606 (registered customers only) Need to add new OUI in FM
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Cisco Notification Service - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.