October 15, 2008
THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
Revision Date Comment 1.0 15-OCT-2008 Initial Public Release
Products Affected MDS NX-OS - 4.1(1a)
In some cases we have observed that a save configuration operation done from Fabric Manager (FM) when running NX-OS 4.1.1a may not complete properly and could result in configuration being lost.
This problem affects the following software files:
This problem was identified in internal testing and is documented in CSCsu88430.
In some cases when issuing a
copy running-config start-upor
install allcommand from FM to switches running NX-OS 4.1.1a, it is possible that the command will not finish and the configuration will not be written properly. When the switch is subsequently reloaded, there is no configuration and the system will stop booting at the
It is recommended that customers upgrade to 4.1.1b or later. The NX-OS 4.1.1b software was made available late on Sunday, October 12, 2008.
If you must run NX-OS 4.1.1a, it is recommended that you not use FM in order to minimize the possibility of exposing yourself to this issue.
To follow the bug ID link below and see detailed bug information, you must be a registered customer and you must be logged in.
DDTS Description CSCsu88430 (registered customers only) Configuration lost after "copy running-config start-up" and reload.
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.