Cisco ONS 15400 Series

June 8, 2007

NOTICE:

THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.

Products Affected

Problem Description

A traffic outage could occur on the 15454-MRC-12, 15454-MRC-4, or 15454-DS3XM-12.

Background

A traffic outage on the 15454-MRC-12, 15454-MRC-4, or 15454-DS3XM-12 could occur under certain conditions when upgrading to release 8.0.

Problem Symptoms

1. Software upgrade from a release prior to 8.0 to 8.0 causes:

   1. Multi-Second outage on the 15454-DS3XM-12 card in the Main slots 1, 3, 5, 12, 14, and16 when an XC or XCVT cross connect card is used.

   2. Complete outage on the 15454-DS3XM-12 card in the Protect slots 2, 4, 6, 13, 15, and 17 when an XC or XCVT cross connect card is used.

   3. Multi-Second outage on the 15454-MRC-12 card when an XC or XCVT cross connect card is used.

   Note: Support for the 15454-MRC-4 card first appears in Release 8.0. Consequently, the software upgrade issue does not apply to the 15454-MRC-4 card.

2. Soft reset in 8.0 causes:

   1. Multi-Second outage on the 15454-DS3XM-12 card in the Main slots 1,3,5,12,14, and 16 when the active XC or XCVT cross connect card is in slot 8.

   2. Total Outage of the 15454-DS3XM-12 card in the Main slots 1, 3, 5, 12, 14, and 16 when the active XC or XCVT cross connect card is in slot 10. A hard reset will clear the problem, but a further soft reset will again cause an outage.

   3. Multi-Second outage on the 15454-DS3XM-12 card in Protect slots 2, 4, 6, 13, 15, and 17 when the active XC or XCVT cross connect card is in slot 10.

   4. Total Outage of the 15454-DS3XM-12 card in Protect slots 2, 4, 6, 13, 15, and 17 when the active XC or XCVT cross connect card is in slot 8. A hard reset will clear the problem, but a further soft reset will again cause an outage.

   5. Multi-Second outage on the 15454-MRC-12 card when an XC or XCVT cross connect card is used.

   6. Multi-Second outage on the 15454-MRC-4 card when an XC or XCVT cross connect card is used.

Workaround/Solution

Replacing the XC or XCVT with a 10G capable cross connect resolves the problem.

Trade-in programs are available to replace your XC or XCVT with either an XC-VXC-10G or XC-10G cross connect card. Access to the Trade-in tool is located at the Cisco Technology Migration Plan (registered customers only) page.

There is no workaround in Release 8.0 when using the 15454-MRC-12, 15454-MRC-4 or the 15454-DS3XM-12 with the XC or XCVT cross connect cards.

If you are unable to replace your XC or XCVT cards, the issue will be addressed in Release 8.5.

DDTS

To follow the bug ID link below and see detailed bug information, you must be a registered user and you must be logged in.

Revision History

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

• Open a service request on Cisco.com
• By email
• By telephone

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.