Revised September 30, 2008
October 05, 2007
THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
|1.1||30-SEP-2008||Removed UMPIRE form and all references to the Upgrade Program.|
|1.0||05-OCT-2007||Initial Public Release|
CSCO - CSCO-CNTRL-BRD(=)
The version of the Controller board listed above was recently introduced containing a software change.
The Software change caused an issue where upon loss of AC power to a single rectifier in a redundant system, no system alarms are generated, and the AC/DC panel status LEDs fail to indicate the condition. The controller and rectifier do recognize the condition.
This only affects alarming. It does not affect the power system.
A customer reported that their alarms were not working properly when one of the AC power feeds was removed from a redundant power system.
This issue was introduced during a recent cost reduction activity, when a new revision of software was implemented.
The system fails to generate an AC Failure Alarm when a single AC power feed is removed from the shelf assembly. The AC/DC panel status LEDs will also fail to indicate the condition.
There is no workaround for this issue.
Cisco recommends a fix-on-fail strategy for this problem.
Service Logistics has known-good inventory at this time.
The standard RMA process and delivery times are in effect.
To follow the bug ID link below and see detailed bug information, you must be a registered customer and you must be logged in.
|CSCsg36068 (registered customers only)||ONS CSCO-SM-PWR-SA not generating single rectifier AC failure alarm|
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.