Revised October 20, 2005
September 14, 2004
THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
When using dot1q on trunk interfaces on the C2970, C3560 and C3750, runts may be seen on the show interface output.
The interface LED may also blink amber.
No connectivity failures are experienced. All network traffic passes normally.
Valid dot1q encapsulated packets, which are 61 to 64 bytes including the q-tag, are counted by the affected devices as undersized frames.
The counting and reporting is erroneous. Network traffic is forwarded correctly. This problem does not affect network data, but solely the interface reporting.
When using dot1q on trunk interfaces on the Cat3750, runts may be seen on the show interface output. The interface LED may blink amber and these packets are not reported in the appropriate unicast, multicast, or broadcast category in receive statistics.
The problem is resolved in the following releases of Cisco IOS software:
Cisco IOS release 12.1(19)EA1d
Cisco IOS release 12.1(20)EA1a
Cisco IOS release 12.1(22)EA1 or later
Cisco IOS release 12.2(20)SE1 or later
It is not necessary to upgrade to one of the fixed releases, as this problem is purely cosmetic and does not affect the functionality of the device. However, the false display of errors will not occur if an upgrade to one of these releases is performed.
To follow the bug ID link below and see detailed bug information, you must be a registered user and you must be logged in.
3750 connected using dot1q cause Runts increase on interface
61-64 byte dot1q frames trigger LED to blink amber
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.