Cisco ONS 15500 Series

Revised June 3, 2008
August 20, 2003

• More Field Notices

NOTICE:

THIS FIELD NOTICE HAS BEEN EXPIRED AND IS NO LONGER MAINTAINED OR UPDATED BY CISCO.

THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE, WARRANTY OR SUPPORT. USE OF THE INFORMATION ON THIS FIELD NOTICE OR MATERIALS LINKED FROM THIS FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.

Products Affected

Problem Description

During initial system power up or upon system reload, the Power-On-Diagnostics (POD) may show an intermittent false failure during the Backplane IDPROM test (bp-idprom-test).

Background

This issue was discovered during manufacturing system test and has been corrected in IOS release 12.1(12c)EV3.

Problem Symptoms

When applying power to or reloading an ONS 15530 running IOS 12.1.(12c)EV2 the (POD) may show a false failure when executing the Backplane IDPROM Test (bp-idprom-test). Users can also detect this failure by executing the show diag power-on from privledged exec mode.

Switch#show diag power-on 
-------------------------------------------------------------------------------- 
Power-on Diagnostics: Version 2.0 
System-wide result: FAILED 
Ran on: Fri Nov 2 2002 At: 04:29:45 UTC CPU was: Primary 
-------------------------------------------------------------------------------- 

Slot: 5/* cpu Result: FAILED 
H/w Ver: 6.2 FPGA func ver: 1.43 Versions compatible: Yes 

Test-name Result Cause-code 
~~~~~~~~~ ~~~~~~ ~~~~~~~~~~ 
cpu-l1-cache Passed - 
cpu-l2-cache Passed - 
gt-pci0 Passed - 
iofpga-access Passed - 
nvram Passed - 
system-tod Passed - 
System-wide result: FAILED 
Ran on: Fri Nov 2 2002 At: 04:29:45 UTC CPU was: Primary 
-------------------------------------------------------------------------------- 
Slot: 5/* cpu Result: FAILED 
H/w Ver: 6.2 FPGA func ver: 1.43 Versions compatible: Yes 

Test-name Result Cause-code 
~~~~~~~~~ ~~~~~~ ~~~~~~~~~~ 
cpu-l1-cache Passed - 
cpu-l2-cache Passed - 
gt-pci0 Passed - 
iofpga-access Passed - 
nvram Passed - 
system-tod Passed - 
bootflash Passed - 
src-access Passed - 
src-timer Passed - 
sw-fabric-config Passed - 
bcom-sw-access Passed - 
bcom-sw-config Passed - 
gt-mii0-internal-lb Passed - 
gt-mii1-internal-lb Passed - 
gt-mpsc-internal-lb Passed - 
bp-idprom-test FAILED 1 
power-supply0 Passed - 
power-supply1 Passed - 
temp-sensor Passed - 
gt-interrupt Passed - 
interrupt0 Passed - 
interrupt2 Passed - 
interrupt3 Passed - 
interrupt7 Passed - 
interrupt8 Passed -

Workaround/Solution

This issue has been resolved in IOS release 12.1(12c)EV3 (ons15530-i-mz.121-12c.EV3.bin) or later. Software can be downloaded from the Software Center on Cisco.com.

For an immediate workaround customers may disable the Power-On-Diagnostics (POD) using the following command:

Switch(config)# no diag power cpu bp-idprom-test slot 5 

To enable the Power-On-Diagnostics after installing IOS 12.1(12c)EV3 type the following command:

Switch(config)# diag power cpu bp-idprom-test slot 5

DDTS

To follow the bug ID link below and see detailed bug information, you must be a registered user and you must be logged in.

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

• Open a service request on Cisco.com
• By email
• By telephone