Revised April 24, 2007
June 8, 1999
THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
Customers may experience cell loss between lower speed Port Adapter Modules (PAMs). Small packets have partial success, but cell loss increases as packet size increases and is total at about 1000 bytes.
PAMs of less than OC-3 rates experience cell drops on transfers within the same Super CAM (SCAM) on Catalyst 8540MSR platforms. There is a problem with how the Field Programmable Gateway Array (FPGA) image on the SCAM handles backpressure.
A cell loss problem exists between lower speed PAMs (below OC-3 rates) that are installed in the same SCAM (C85MS-SCAM-2P=) on all SCAMs whose FPGA image is lower that 1.5.
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.