In addition to the Remote Access procedures listed in the Installing the Operating System on the Cisco IP Telephony Applications Server, this document lists the methods used by Cisco Technical Support to access systems remotely. This greatly enhances the engineer's ability to diagnose and resolve system issues. Though it is not required, customers are highly encouraged to supply some kind of access for troubleshooting purposes.
It is the customer's responsibility to supply any required software.
There are no specific requirements for this document.
The information in this document is based on these software and hardware versions:
Cisco CallManager 3.x(x) and later
Virtual Network Computing (VNC)
Windows Terminal Service (WTS) (also called Remote Desktop)
WTS is not supplied by Cisco.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
For more information on document conventions, refer to Cisco Technical Tips Conventions.
For additional information on Cisco CallManager remote access, refer to the May I use Terminal Services, VNC, or ILO on this server during the upgrade chapter of Installing the Operating System on the Cisco IP Telephony Applications Server, Version 2000.2.6.
VNC now ships with the Cisco CallManager install CD and is supported for remote access to Cisco CallManager. For more information on VNC, refer to the RealVNC site .
VNC is the only supported remote access method for software installations and upgrades.
If you want to use Virtual Network Computing (VNC) to remotely upgrade a Cisco CallManager server, refer to the Cisco IP Telephony Operating System documentation page to obtain the latest version of the VNC document.
For more information, refer to Upgrading Cisco CallManager Release 4.1.2.
Caution: If you have installed VNC but do not plan to use it to perform the upgrade, disable it to prevent remote access to the server. If you do not disable VNC and a user/administrator accesses the server at the time of the upgrade, the upgrade fails.
Cisco installs Terminal Services. Therefore, Cisco Technical Support is able to perform remote administration and troubleshooting tasks. Windows Terminal Services is supported and preferred for remote server administration and access for Cisco Technical Support.
Installation or upgrades of software is not supported on Cisco CallManager.
Caution: Before the upgrade, Cisco recommends that you disable Terminal Services and immediately reboot the server to prevent remote access to the server. If you access the server through Terminal Services, it sometimes causes the upgrade to fail.
After you upgrade the server, you must enable Terminal Services.
For more information on WTS, refer to Microsoft's WTS site .
Do not use ILO to perform upgrade or installation tasks. Cisco supports ILO for remote management and configuration tasks only.
For more information on ILO, refer to About ILO.
Cisco MeetingPlace is a unique tool used by Technical Support for web conferencing. It allows access to systems through HTTP. As long as there is Internet access from the Cisco CallManager server, this is the preferred method.
Note: By default, Internet Explorer opens new links in the existing windows. Therefore, you can easily lose your web conference when you click on a link. To prevent this Internet Explorer behavior, select Tools > Internet Options > Advanced and uncheck Reuse windows for launching shortcuts.
Open TCP port 1627 in order to share the desktop. If TCP port 1627 is blocked by the firewall, messages are tunneled through TCP port 80. Cisco MeetingPlace also supports tunneling using HTTPS (SSL). SSL requires an SSL Certificate. To enable support for SSL, port 443 must be open on the network. For information on the Web Conferencing application, refer to Cisco MeetingPlace Web Conferencing.
Note: When you initiate a Terminal Service session to the Cisco CallManager server, launch a browser from there to Cisco MeetingPlace, share the desktop, and then minimize this Terminal Service session, the web conference with Technical Support freezes. Cisco recommends that you either share the desktop from your local PC, logon to Cisco MeetingPlace from the server console directly, or do not minimize your Terminal Service session to the Cisco CallManager.
For additional product information, refer to Cisco MeetingPlace.
If you need to set up a session with a Technical Support engineer, go to the TAC MeetingPlace page.
From this page, enter the unique meeting ID number that the Technical Support engineer assigns for this meeting. If you are a first time user, select the Browser Test link to ensure compatibility. If you do not already have them, the Test Browser page prompts you to install some Java components. This is a one time process. It is not required the next time you connect to Cisco MeetingPlace.
Once you sign in as a guest, you can share any application with the Technical Support engineer and allow the engineer control.
Note: When you use Cisco MeetingPlace for Web Conferencing, the Internet browser process uses a portion of CPU resources. This is expected behavior.
Customers are responsible for secure network connectivity for access. Cisco Virtual Private Network (VPN) connections are the preferred method.
A VPN is a private network that uses public phone lines (or in some cases a cable modem). Privacy is maintained through encryption and the use of secure protocols. When you use a VPN to access Cisco CallManager through a firewall, you can use Cisco CallManager as if you were inside the network.
VPN is required in these circumstances:
When you need access to the Cisco CallManager website (http://<Cisco CallManager server name>/ccmadmin) from a remote computer outside your network firewall.
Note: If you do not use VPN for remote access, refer to the Microsoft website for information on configuring Distributed Component Object Model (DCOM) through a firewall.
Discuss the set up of a VPN with your LAN administrator.
The Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and collaborate with your peers.
Refer to Cisco Technical Tips Conventions for information on conventions used in this document.