Using Pan, Tilt, and Zoom on the WVC200 [Cisco Small Business Video Surveillance Cameras]

Document ID: 108677

Updated: Dec 12, 2008

Introduction
How do I use the Pan, Tilt, and Zoom features of the WVC200?
Related Information

Introduction

This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).

Q. How do I use the Pan, Tilt, and Zoom features of the WVC200?

The WVC200 has a special feature that allows the user to pan, tilt, and zoom the camera to focus in and out of a certain subject. This allows you the freedom to view multiple angles. To use this feature, you have to access the WVC200's Web-Based Setup page and use the utility from there.

Using Pan, Tilt, and Zoom on the WVC200

Step 1:
Access the Wireless Video Camera's web-based setup page.
Step 2:
When the Wireless Video Camera's setup page appears, click Setup and View Video.
Step 3:
When the View Video page appears, use the buttons on the left to zoom and/or pan/tilt the camera. The magnifying glass icons will allow you to use the zoom feature and the arrows, to pan/tilt the camera.