Cisco Unified Call Studio

Document ID: 91768

Contents

Introduction
Prerequisites
      Components Used
      Conventions
Background Information
NetPro Discussion Forums - Featured Conversations
Related Information

Introduction

This document explains how to configure Cisco Unified Call Studio, Universal Edition, to use a workspace location other than the default: Studio\eclipse\workspace.

Prerequisites

Components Used

The information in this document is based on Cisco Unified Call Studio, Universal Edition.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Background Information

Symptoms: N/A

Resolution: There are two ways to make this change:

1. You can make the change from within Cisco Unified Call Studio. Start Studio and, from the menu options, choose File > Switch Workspace.

2. You can edit the file, startStudio.cmd, which is located in the main Cisco Unified Call Studio folder; either delete the -data eclipse\workspace portion, or change it to the desired folder.

   Note: If you delete it, Cisco Unified Call Studio asks you for the location of a workspace at startup.

NetPro Discussion Forums - Featured Conversations

Related Information

• Technical Support & Documentation - Cisco Systems