Table 8-1 NICS Output Field Ordering
Field
|
Field Name
|
Format
|
PGW 2200 CDB, CDE Tag Numbers and Derivation
|
Padding and Alignment
|
1
|
Record Sequence Number (RSN)
|
(1-25 digits), number in decimal format
|
No direct mapping.
BAMS generates the RSN on its own as a 64-bit integer, starting from 1.
First record, RSN = 1.
Second record, RSN=2, ...
The Nth record,
RSN = N, ...
The RSN is not reset when BAMS restarts or when BAMS generates a new output file.
|
None
|
2
|
Call Event ID
|
(CHAR 26)
|
Char (1-6), softswitch group ID, first 6 characters of tag 6000 from 1090 CDB.
Char (7-14), date in YYYYMMDD format, using value from tag 4100/4101 in CDB 1010 or 1030, uses 4001 if neither is available.
Char (15-23), time in HHMMSSmmm format.
Char (24-26), the sequence number, decimal format left padded by 0. Uses the last 3 digits of the following number:
(tag4002) & 0xffffffff
|
|
3
|
NICS Identifier (a.k.a. Switch id)
|
CHAR 10
|
CDE tag 6000 from CDB 1090. Tag 6000 may contain up to 32 characters, only up to the first 10 characters are used
|
None
|
4
|
Call Direction
|
number 1
|
No direct mapping available, not required, always populated with the digit "0"
|
None
|
5
|
Link ID
|
number 1
|
All 1030 CDBs:
0 1040 CDBs without any previous 1060s
0 the first 1060, 1 the second and later 1060, 2 1040 with any previous 1060s, 3
|
None
|
6
|
Calling Party Cat
|
char(3)
|
Same as tag 3000 or tag 2000 in 1010 or 1030 CDB, whichever is present. In decimal format, such as 000, 013, etc. Defaults to "000" if no tag 2000 or 3000 is found.
|
Right aligned, zero padded on left.
|
7
|
Origin Line Info
|
|
Same as tag 2002 or 3002 in 1010 or 1030 CDB. In decimal format, such as 000, 013, etc., defaults to "000" if no 3002 or 2002 is found.
|
Right aligned, zero padded on left.
|
8
|
Jurisdiction
|
char(6)
|
Populated with NUL
|
None
|
9
|
Called NAI
|
number, 3 digits, decimal format
|
Tag 3007 or 2007 from 1010 or 1030 CDB.
|
Right aligned, pad by 0
|
10
|
Calling NAI
|
number, 3 digits, decimal format
|
Tag 3003 or 2003 from 1010 or 1030 CDB.
|
Right aligned, pad by 0
|
11
|
Charge NAI
|
number, 3 digits, decimal format
|
Tag 2004 from 1010 or 1030 CDB, defaults to 000 if tag is not available.
|
Right aligned, pad by 0
|
12
|
Caller Presentation
|
char (2)
|
Always 00.
|
|
13
|
Media Type
|
char (2)
|
Always 00.
|
|
14
|
Connection Date
|
char (8)
|
Tag 4100 from 1010 or 1030 CDB.
Format: YYYYMMDD
|
|
15
|
Connection Time
|
char (9)
|
Tag 4100 from 1010 or 1030 CDB.
Format: HHMMSSmmm
|
|
16
|
Answer Indicator
|
number (1)
|
If both tags 4104 and 4105 are present in 1030 or 1010 CDB, the digit is 1. Otherwise the digit is 0.
|
None
|
17
|
Call Termination Code
|
number (3), decimal
|
Same as in tag 2008 or 3008 CDE. For example, "016", "031", defaults to NUL for long-duration records.
|
Right aligned, padded by "0".
|
18
|
Originating Country Code
|
number (5)
|
Always NUL, not required.
|
None
|
19
|
Originating Number
|
char (40)
|
CDE 4010 from 1010 or 1030 CDB.
|
None
|
20
|
Dialed Country Code
|
number (5)
|
Always NUL, not required.
|
None
|
21
|
Dialed Number
|
char (40)
|
CDE 4012 or CDE 4014 from 1010 or 1030 CDB.
|
None
|
22
|
Terminating Country Code
|
number (5)
|
Always NUL, not required.
|
None
|
23
|
Terminating Number
|
char (40)
|
CDE 4014 from 1010 or 1030 CDB.
|
None
|
24
|
Charge Number
|
char (40)
|
CDE 4011.
|
None
|
25
|
Elapsed Time
|
char (10)
|
The earlier of 4106 or 4107 from CDB 1040/1030 minus the later of 4104 or 4105 from 1010/1030 CDB.
For long durations, this field uses the time stamp of the 1060 (4001) minus the later of 4104/4105 from the 1010 CDB.
Format: HHHMMSSmmm
|
Right aligned for each subfield, 0 padded.
|
26
|
Carrier ID Code
|
char (4)
|
CDE 2014 from 1010/1030, in decimal format, default NUL.
|
None
|
27
|
Ingress carrier connection date
|
char (8)
|
4103 from 1010/1030 CDB.
Format: YYYYMMDD
|
None
|
28
|
Ingress carrier connection time
|
char (9)
|
4103 from 1010/1030 CDB.
Format: HHMMSSmmm
|
None
|
29
|
Ingress carrier disconnection date
|
char (8)
|
If (CDE 4028 != 1), it uses earlier of CDE 4107 and 4106, otherwise it uses the later of the two.
Format: YYYYMMDD
NUL for long-duration records.
|
None
|
30
|
Ingress carrier disconnection time
|
char (9)
|
If (CDE 4028 != 1), it uses earlier of CDE 4107 and 4106, otherwise it uses the later of the two.
Format: HHMMSSmmm
NUL for long-duration records.
|
|
31
|
Ingress Remote Point Code
|
char (9)
|
CDE 4034 from 1010 or 1030.
|
|
32
|
Ingress CIC ID
|
number (4)
|
CDE 4068 from 1010 or 1030, default 0000
|
Right aligned, zero padded
|
33
|
Ingress - Access Device ID
|
number (10)
|
Always 0000000000
|
Right aligned, zero padded
|
34
|
Ingress Module
|
number (4)
|
Always 0000
|
Right aligned, zero padded
|
35
|
Ingress Line
|
number (4)
|
Always 0000
|
Right aligned, zero padded
|
36
|
Ingress Channel
|
number (4)
|
Always 0000
|
Right aligned, zero padded
|
37
|
Ingress trunk group name
|
char (8)
|
CDE 4008 from 1010 or 1030 and the prefix value from the trunkgrp table.
For example, if the trunk group is 1001 and the prefix is "SIP", this field is "SIP1001"
|
None
|
38
|
Ingress trunk name
|
number (8)
|
CDE 4009 from 1010 or 1030
|
None
|
39
|
Ingress Protocol
|
char (10)
|
CDE 4069 from 1010/1030. Values:
0 = ISDN_PRI
1 = SS7
2 = DPNSS
3 = CAS
4 = ASN
5 = Unknown
6 = EISUP
7 = H323
8 = SIP
9 = MGCP
Default = Unknown
|
None
|
40
|
Ingress Coding
|
char (16)
|
Always NUL.
|
|
41
|
Ingress Audio Cap
|
char (16)
|
Always NUL.
|
|
42
|
Ingress - IP Address
|
char (15)
|
Always 000.000.000.000
|
Three chars for each dot separated fields of the IP address. Right aligned, zero padded.
|
43
|
Ingress RTP Port
|
number (6)
|
Always 000000
|
Right aligned, zero padded
|
44
|
Ingress Pkts sent
|
number (9)
|
Always 000000000
|
Right aligned, zero padded
|
45
|
Ingress Pkts recv
|
number (9)
|
Always 000000000
|
Right aligned, zero padded
|
46
|
Ingress Pkts dropped
|
number (9)
|
Always 000000000
|
Right aligned, zero padded
|
47
|
End Date
|
char (8)
|
Derived from the earlier of CDE 4106 or 4107 in 1010 or 1030 CDB.
Format: YYYYMMDD
NUL for long-duration records.
|
|
48
|
End Time
|
char (9)
|
Derived from the earlier of CDE 4106 or 4107 in 1010 or 1030 CDB.
Format: HHMMSSmmm
NUL for long-duration records.
|
|
49
|
Answer Date
|
char (8)
|
Derived from 4104 in 1010 or 1030, if 4104 is not present, it uses 4100 in 1010 or 1030.
Format: YYYYMMDD
|
|
50
|
Answer Time
|
char (9)
|
Derived from 4104 in 1010 or 1030, if 4104 is not present, it uses 4100 in 1010 or 1030.
Format: HHMMSSmmm,
|
|
51
|
Carrier Select Info
|
number (2)
|
CDE 2015 from 1010 or 1030, default 00
|
|
52
|
Routing select
|
number (2)
|
Route index, first two octets of CDE 4045 from 1010, default 00
|
Right aligned, zero padded
|
53
|
Egress Remote PC
|
char (9)
|
CDE 4037 from 1010 or 1030.
|
|
54
|
Egress CIC
|
number (4)
|
CDE 4072 from 1010 or 1030, default 0000
|
Right aligned, zero padded
|
55
|
Egress - Access Device ID
|
char (10)
|
Always NUL.
|
None
|
56
|
Egress Module
|
char (4)
|
Always NUL.
|
|
57
|
Egress Line
|
char (4)
|
Always NUL.
|
|
58
|
Egress Channel
|
char (4)
|
Always NUL.
|
|
59
|
Egress trunk group name
|
char (8)
|
CDE 4015 from 1010 or 1030, and the prefix value from the Trunk Group table.
For example, if the trunk group is 2001 and the prefix is "P", this field is "P2001".
|
None
|
60
|
Egress trunk name
|
number (8)
|
CDE 4016 from 1010 or 1030.
|
|
61
|
Egress Protocol
|
char (10)
|
CDE 4073 from 1010 or 1030. Values:
0 = ISDN_PRI
1 = SS7
2 = DPNSS
3 = CAS
4 = ASN
5 = Unknown
6 = EISUP
7 = H323
8 = SIP
9 = MGCP
Default = Unknown
|
|
62
|
Egress Coding
|
char (16)
|
Always NUL.
|
|
63
|
Egress Audio Cap
|
char (16)
|
Always NUL.
|
|
64
|
Egress - IP Address
|
char (15)
|
Always 000.000.000.000
|
Three chars for each dot separate the IP address fields. Right aligned, zero padded.
|
65
|
Egress RTP Port
|
number (6)
|
Always 000000
|
Right aligned, zero padded
|
66
|
Egress Pkts sent
|
number (9)
|
Always 000000000
|
|
67
|
Egress Pkts recv
|
number (9)
|
Always 000000000
|
Right aligned, zero padded
|
68
|
Egress Pkts dropped
|
number (9)
|
Always 000000000
|
Right aligned, zero padded
|
69
|
Egress carrier connection date
|
char (8)
|
4103 from 1010 or 1030.
Format: YYYYMMDD
|
None
|
70
|
Egress carrier connection time
|
char (9)
|
4103 from 1010 or 1030.
Format: HHMMSSmmm
|
None
|
71
|
Egress carrier disconnection date
|
char (8)
|
If (CDE 4028 == 1), it uses earlier of CDE 4106 and 4107, otherwise it uses the later of the two.
Format: YYYYMMDD
|
None
|
72
|
Egress carrier disconnection time
|
char (9)
|
If (CDE 4028 == 1), it uses earlier of CDE 4106 and 4107, otherwise it uses the later of the two.
Format: HHMMSSmmm
|
None
|
73
|
Services
|
|
Not used, always NUL.
|
None
|
