Cisco Enterprise Structure of Management Information [Cisco PGW 2200 Softswitch]

Table Of Contents

Cisco Enterprise Structure of Management Information

Introduction

Cisco Structured Management Information MIBs

ciscoAdmin assignments

Administrative assignments for repeaters

Administrative assignments for chip sets

Cisco Enterprise Structure of Management Information

Introduction

This chapter provides a set of objects used for the structure of management information for the Cisco enterprise and consists of new object identifier definition (OID) assignments for Cisco REPEATER MIB and others.

Cisco Structured Management Information MIBs

ciscoProducts OBJECT-IDENTITY

STATUS current

DESCRIPTION

ciscoProducts is the root OBJECT IDENTIFIER from which sysObjectID values are assigned. Actual values are defined in CISCO-PRODUCTS-MIB.

::= { cisco 1 }

local OBJECT-IDENTITY

STATUS current

DESCRIPTION

"Subtree beneath which pre-10.2 MIBS were built."

::= { cisco 2 }

temporary OBJECT-IDENTITY

STATUS current

DESCRIPTION

Subtree beneath which pre-10.2 experiments were placed.

::= { cisco 3 }

pakmon OBJECT-IDENTITY

STATUS current

DESCRIPTION

Reserved for pakmon

::= { cisco 4 }

workgroup OBJECT-IDENTITY

STATUS current

DESCRIPTION

"subtree reserved for use by the Workgroup Business Unit.

::= { cisco 5 }

otherEnterprises OBJECT-IDENTITY

STATUS current

DESCRIPTION

This provides a root object identifier from which mibs produced by other companies may be placed. MIBs produced by other enterprises are typicially implemented with the object identifiers as defined in the MIB, but if the MIB is deemed to be uncontrolled, we may reroot the mib at this subtree in order to have a controlled version.

::= { cisco 6 }

ciscoAgentCapability OBJECT-IDENTITY

STATUS current

DESCRIPTION

ciscoAgentCapability provides a root object identifier from which AGENT-CAPABILITIES values may be assigned.

::= { cisco 7 }

ciscoConfig OBJECT-IDENTITY

STATUS current

DESCRIPTION

ciscoConfig is the main subtree for configuration mibs.

::= { cisco 8 }

ciscoMgmt OBJECT-IDENTITY

STATUS current

DESCRIPTION

ciscoMgmt is the main subtree for new mib development.

::= { cisco 9 }

ciscoExperiment OBJECT-IDENTITY

STATUS current

DESCRIPTION

ciscoExperiment provides a root object identifier from which experimental mibs may be temporarily based. MIBs are typicially based here if they fall in one of two categories

1. IETF work-in-process mibs which have not been assigned a permanent object identifier by the IANA.

2. Cisco work-in-process which has not been assigned a permanent object identifier by the cisco assigned number authority, typicially because the mib is not ready for deployment.

Note Support for mibs in the ciscoExperiment subtree will be deleted when a permanent object identifier assignment is made.

::= { cisco 10 }

ciscoAdmin OBJECT-IDENTITY

STATUS current

DESCRIPTION

ciscoAdmin is reserved for administratively assigned OBJECT IDENTIFIERS, i.e. those not associated with MIB objects"

::= { cisco 11 }

ciscoModules OBJECT-IDENTITY

STATUS current

DESCRIPTION

ciscoModules provides a root object identifier from which MODULE-IDENTITY values may be assigned.

::= { cisco 12 }

lightstream OBJECT-IDENTITY

STATUS current

DESCRIPTION

subtree reserved for use by Lightstream

::= { cisco 13 }

ciscoworks OBJECT-IDENTITY

STATUS current

DESCRIPTION

ciscoworks provides a root object identifier beneath which mibs applicable to the CiscoWorks family of network management products are defined.

::= { cisco 14 }

newport OBJECT-IDENTITY

STATUS current

DESCRIPTION

subtree reserved for use by the former Newport Systems Solutions, now a portion of the Access Business Unit.

::= { cisco 15 }

ciscoPartnerProducts OBJECT-IDENTITY

STATUS current

DESCRIPTION

ciscoPartnerProducts is the root OBJECT IDENTIFIER from which partner sysObjectID values may be assigned. Such sysObjectID values are composed of the ciscoPartnerProducts prefix, followed by a single identifier that is unique for each partner, followed by the value of sysObjectID of the Cisco product from which partner product is derived.

Note The chassisPartner MIB object defines the value of the identifier assigned to each partner.

::= { cisco 16 }

ciscoAdmin assignments

ciscoProxy OBJECT-IDENTITY

STATUS current

DESCRIPTION

ciscoProxy OBJECT IDENTIFIERS are used to uniquely name party mib records created to proxy for SNMPv1.

::= { ciscoAdmin 1 }

ciscoPartyProxy OBJECT IDENTIFIER ::= { ciscoProxy 1 }

ciscoContextProxy OBJECT IDENTIFIER ::= { ciscoProxy 2 }

Administrative assignments for repeaters

ciscoRptrGroupObjectID OBJECT-IDENTITY

STATUS current

DESCRIPTION

ciscoRptrGroupObjectID OBJECT IDENTIFIERS are used to uniquely identify groups of repeater ports for use by the SNMP-REPEATER-MIB (RFC 1516) rptrGroupObjectID object.

::= { ciscoAdmin 2 }

ciscoUnknownRptrGroup OBJECT-IDENTITY

STATUS current

DESCRIPTION

The identity of an unknown repeater port group.

::= { ciscoRptrGroupObjectID 1 }

cisco2505RptrGroup OBJECT-IDENTITY

STATUS current

DESCRIPTION

The authoritative identity of the Cisco 2505 repeater port group.

::= { ciscoRptrGroupObjectID 2 }

cisco2507RptrGroup OBJECT-IDENTITY

STATUS current

DESCRIPTION

The authoritative identity of the Cisco 2507 repeater port group.

::= { ciscoRptrGroupObjectID 3 }

cisco2516RptrGroup OBJECT-IDENTITY

STATUS current

DESCRIPTION

The authoritative identity of the Cisco 2516 repeater port group.

::= { ciscoRptrGroupObjectID 4 }

ciscoWsx5020RptrGroup OBJECT-IDENTITY

STATUS current

DESCRIPTION

The authoritative identity of the wsx5020 repeater port group.

::= { ciscoRptrGroupObjectID 5 }

Administrative assignments for chip sets

ciscoChipSets OBJECT-IDENTITY

STATUS current

DESCRIPTION

Numerous media-specific MIBS have an object, defined as an OBJECT IDENTIFIER, which is the identity of the chipset realizing the interface. Cisco-specific chipsets have their OBJECT IDENTIFIERS assigned under this subtree.

::= { ciscoAdmin 3 }

ciscoChipSetSaint1 OBJECT-IDENTITY

STATUS current

DESCRIPTION

The identity of the Rev 1 SAINT ethernet chipset manufactured for cisco by LSI Logic."

::= { ciscoChipSets 1 }

ciscoChipSetSaint2 OBJECT-IDENTITY

STATUS current

DESCRIPTION

The identity of the Rev 2 SAINT ethernet chipset manufactured for cisco by LSI Logic."

::= { ciscoChipSets 2 }

ciscoChipSetSaint3 OBJECT-IDENTITY

STATUS current

DESCRIPTION

The identity of the Rev 3 SAINT ethernet chipset manufactured for cisco by Plessey."

::= { ciscoChipSets 3 }

ciscoChipSetSaint4 OBJECT-IDENTITY

STATUS current

DESCRIPTION

The identity of the Rev 4 SAINT ethernet chipset manufactured for cisco by Mitsubishi."

::= { ciscoChipSets 4 }

END


	Cisco Enterprise Structure of Management Information
	Download this chapter Cisco Enterprise Structure of Management Information Table Of Contents Cisco Enterprise Structure of Management Information Introduction Cisco Structured Management Information MIBs ciscoAdmin assignments Administrative assignments for repeaters Administrative assignments for chip sets Cisco Enterprise Structure of Management Information Introduction This chapter provides a set of objects used for the structure of management information for the Cisco enterprise and consists of new object identifier definition (OID) assignments for Cisco REPEATER MIB and others. Cisco Structured Management Information MIBs ciscoProducts OBJECT-IDENTITY STATUS current DESCRIPTION ciscoProducts is the root OBJECT IDENTIFIER from which sysObjectID values are assigned. Actual values are defined in CISCO-PRODUCTS-MIB. ::= { cisco 1 } local OBJECT-IDENTITY STATUS current DESCRIPTION "Subtree beneath which pre-10.2 MIBS were built." ::= { cisco 2 } temporary OBJECT-IDENTITY STATUS current DESCRIPTION Subtree beneath which pre-10.2 experiments were placed. ::= { cisco 3 } pakmon OBJECT-IDENTITY STATUS current DESCRIPTION Reserved for pakmon ::= { cisco 4 } workgroup OBJECT-IDENTITY STATUS current DESCRIPTION "subtree reserved for use by the Workgroup Business Unit. ::= { cisco 5 } otherEnterprises OBJECT-IDENTITY STATUS current DESCRIPTION This provides a root object identifier from which mibs produced by other companies may be placed. MIBs produced by other enterprises are typicially implemented with the object identifiers as defined in the MIB, but if the MIB is deemed to be uncontrolled, we may reroot the mib at this subtree in order to have a controlled version. ::= { cisco 6 } ciscoAgentCapability OBJECT-IDENTITY STATUS current DESCRIPTION ciscoAgentCapability provides a root object identifier from which AGENT-CAPABILITIES values may be assigned. ::= { cisco 7 } ciscoConfig OBJECT-IDENTITY STATUS current DESCRIPTION ciscoConfig is the main subtree for configuration mibs. ::= { cisco 8 } ciscoMgmt OBJECT-IDENTITY STATUS current DESCRIPTION ciscoMgmt is the main subtree for new mib development. ::= { cisco 9 } ciscoExperiment OBJECT-IDENTITY STATUS current DESCRIPTION ciscoExperiment provides a root object identifier from which experimental mibs may be temporarily based. MIBs are typicially based here if they fall in one of two categories 1. IETF work-in-process mibs which have not been assigned a permanent object identifier by the IANA. 2. Cisco work-in-process which has not been assigned a permanent object identifier by the cisco assigned number authority, typicially because the mib is not ready for deployment. Note Support for mibs in the ciscoExperiment subtree will be deleted when a permanent object identifier assignment is made. ::= { cisco 10 } ciscoAdmin OBJECT-IDENTITY STATUS current DESCRIPTION ciscoAdmin is reserved for administratively assigned OBJECT IDENTIFIERS, i.e. those not associated with MIB objects" ::= { cisco 11 } ciscoModules OBJECT-IDENTITY STATUS current DESCRIPTION ciscoModules provides a root object identifier from which MODULE-IDENTITY values may be assigned. ::= { cisco 12 } lightstream OBJECT-IDENTITY STATUS current DESCRIPTION subtree reserved for use by Lightstream ::= { cisco 13 } ciscoworks OBJECT-IDENTITY STATUS current DESCRIPTION ciscoworks provides a root object identifier beneath which mibs applicable to the CiscoWorks family of network management products are defined. ::= { cisco 14 } newport OBJECT-IDENTITY STATUS current DESCRIPTION subtree reserved for use by the former Newport Systems Solutions, now a portion of the Access Business Unit. ::= { cisco 15 } ciscoPartnerProducts OBJECT-IDENTITY STATUS current DESCRIPTION ciscoPartnerProducts is the root OBJECT IDENTIFIER from which partner sysObjectID values may be assigned. Such sysObjectID values are composed of the ciscoPartnerProducts prefix, followed by a single identifier that is unique for each partner, followed by the value of sysObjectID of the Cisco product from which partner product is derived. Note The chassisPartner MIB object defines the value of the identifier assigned to each partner. ::= { cisco 16 } ciscoAdmin assignments ciscoProxy OBJECT-IDENTITY STATUS current DESCRIPTION ciscoProxy OBJECT IDENTIFIERS are used to uniquely name party mib records created to proxy for SNMPv1. ::= { ciscoAdmin 1 } ciscoPartyProxy OBJECT IDENTIFIER ::= { ciscoProxy 1 } ciscoContextProxy OBJECT IDENTIFIER ::= { ciscoProxy 2 } Administrative assignments for repeaters ciscoRptrGroupObjectID OBJECT-IDENTITY STATUS current DESCRIPTION ciscoRptrGroupObjectID OBJECT IDENTIFIERS are used to uniquely identify groups of repeater ports for use by the SNMP-REPEATER-MIB (RFC 1516) rptrGroupObjectID object. ::= { ciscoAdmin 2 } ciscoUnknownRptrGroup OBJECT-IDENTITY STATUS current DESCRIPTION The identity of an unknown repeater port group. ::= { ciscoRptrGroupObjectID 1 } cisco2505RptrGroup OBJECT-IDENTITY STATUS current DESCRIPTION The authoritative identity of the Cisco 2505 repeater port group. ::= { ciscoRptrGroupObjectID 2 } cisco2507RptrGroup OBJECT-IDENTITY STATUS current DESCRIPTION The authoritative identity of the Cisco 2507 repeater port group. ::= { ciscoRptrGroupObjectID 3 } cisco2516RptrGroup OBJECT-IDENTITY STATUS current DESCRIPTION The authoritative identity of the Cisco 2516 repeater port group. ::= { ciscoRptrGroupObjectID 4 } ciscoWsx5020RptrGroup OBJECT-IDENTITY STATUS current DESCRIPTION The authoritative identity of the wsx5020 repeater port group. ::= { ciscoRptrGroupObjectID 5 } Administrative assignments for chip sets ciscoChipSets OBJECT-IDENTITY STATUS current DESCRIPTION Numerous media-specific MIBS have an object, defined as an OBJECT IDENTIFIER, which is the identity of the chipset realizing the interface. Cisco-specific chipsets have their OBJECT IDENTIFIERS assigned under this subtree. ::= { ciscoAdmin 3 } ciscoChipSetSaint1 OBJECT-IDENTITY STATUS current DESCRIPTION The identity of the Rev 1 SAINT ethernet chipset manufactured for cisco by LSI Logic." ::= { ciscoChipSets 1 } ciscoChipSetSaint2 OBJECT-IDENTITY STATUS current DESCRIPTION The identity of the Rev 2 SAINT ethernet chipset manufactured for cisco by LSI Logic." ::= { ciscoChipSets 2 } ciscoChipSetSaint3 OBJECT-IDENTITY STATUS current DESCRIPTION The identity of the Rev 3 SAINT ethernet chipset manufactured for cisco by Plessey." ::= { ciscoChipSets 3 } ciscoChipSetSaint4 OBJECT-IDENTITY STATUS current DESCRIPTION The identity of the Rev 4 SAINT ethernet chipset manufactured for cisco by Mitsubishi." ::= { ciscoChipSets 4 } END
	© 1992-2009 Cisco Systems, Inc. All rights reserved. Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks of Cisco Systems, Inc.