Table Of Contents
TransPath Operational Component
Transpath Enterprise Specific Traps
Cisco Transpath TP MIBs
This chapter describes the Cisco Transpath TP MIBs identifies the TransPath operational component MIBS s table and is used to:
•
Revise the experimental branch of Cisco MIB tree
•
–
–
•
The Cisco Transpath TP MIB definitions include:
•
•
Object Identifiers
lightspeed OBJECT IDENTIFIER ::= {enterprises 2496}
lightspeedProducts OBJECT IDENTIFIER ::= {lightspeed 1}
transpath OBJECT IDENTIFIER ::= {lightspeedProducts 1}
TransPath Main Branches
tpOperational OBJECT IDENTIFIER ::= { transpath 1 }
tpProvisioning OBJECT IDENTIFIER ::= { transpath 2 }
tpMeasurement OBJECT IDENTIFIER ::= { transpath 3 }
tpTraps OBJECT IDENTIFIER ::= { transpath 4 }
tpRecords OBJECT IDENTIFIER ::= { transpath 5 }
Operational Core MIB Objects
ciscoTPOperationalMIB MODULE-IDENTITY
TransPath Operational Component
ciscoTPOperationalMIBObjects OBJECT IDENTIFIER ::= { ciscoTPOperationalMIB 1 }
tpCompGroup OBJECT IDENTIFIER ::= { ciscoTPOperationalMIBObjects 1 }
tpAlarmGroup OBJECT IDENTIFIER ::= { ciscoTPOperationalMIBObjects 2 }
tpCompTable OBJECT-TYPE
SYNTAX SEQUENCE OF TpCompTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TransPath operational components table."
::= {tpCompGroup 1}
tpCompTableEntry OBJECT-TYPE
SYNTAX TpCompTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TransPath component entry definition."
INDEX {tpComponentId}
::= {tpCompTable 1}
TpCompTableEntry ::=
SEQUENCE
{
tpComponentId INTEGER,
tpComponentType INTEGER,
tpCompParentId INTEGER,
tpCompMMLName DisplayString,
tpCompDesc DisplayString,
tpCompOpStatus DisplayString
}
tpComponentId OBJECT-TYPE
SYNTAX INTEGER (1.. 4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The component identification number. This number consists of
two parts, the component type and component instance. The
most significant 2-bytes signifies the component type, and the
lower 2 bytes is the sequential instance of the type."
::= {tpCompTableEntry 1}
tpComponentType OBJECT-TYPE
SYNTAX INTEGER (1.. 4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The component type identification number.i"
::= {tpCompTableEntry 2}
tpCompParentId OBJECT-TYPE
SYNTAX INTEGER (1.. 4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The component parent identification."
::= {tpCompTableEntry 3}
tpCompMMLName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1.. 20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a short notation of the component name. It is also the
MML (man-machine language) name that can be used in the MML
session."
::= {tpCompTableEntry 4}
tpCompDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0.. 128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The component description"
::= {tpCompTableEntry 5}
tpCompOpStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE (0.. 15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the component"
::= {tpCompTableEntry 6}
Alarm Record Objects
tpAlarmObject OBJECT IDENTIFIER ::= { tpRecords 5 }
tpAlarmId OBJECT-TYPE
SYNTAX INTEGER (1.. 4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The alarm indentification"
::= {tpAlarmObject 1}
tpAlarmCatId OBJECT-TYPE
SYNTAX INTEGER (1.. 90000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The alarm category identification number"
::= {tpAlarmObject 2}
tpAlarmCatName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0.. 15))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The alarm category name"
::= {tpAlarmObject 3}
tpAlarmCatDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0.. 128))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The alarm category description"
::= {tpAlarmObject 4}
tpAlarmSet OBJECT-TYPE
SYNTAX INTEGER
{
clear (1),
set (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The alarm set or not."
::= {tpAlarmObject 5}
tpAlarmNotify OBJECT-TYPE
SYNTAX INTEGER
{
no (1),
yes (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm has been notified or not."
::= {tpAlarmObject 6}
tpAlarmSeverity OBJECT-TYPE
SYNTAX INTEGER
{
informational (1),
minor (2),
major (3),
critical (4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The alarm severity."
::= {tpAlarmObject 7}
tpAlarmReported OBJECT-TYPE
SYNTAX INTEGER
{
no (1),
yes (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The alarm reported."
::= {tpAlarmObject 8}
tpAlarmTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The time when alarm occured."
::= {tpAlarmObject 9}
Transpath Enterprise Specific Traps
commAlarm NOTIFICATION-TYPE
OBJECTS
{
tpAlarmId,
tpAlarmCatId,
tpAlarmCatName,
tpAlarmCatDesc,
tpAlarmSet,
tpAlarmNotify,
tpAlarmSeverity,
tpAlarmReported,
tpComponentId,
tpComponentType,
tpCompMMLName,
tpCompDesc,
tpCompParentId,
tpAlarmTime
}
STATUS current
DESCRIPTION
"Notification of a communication error. This shows
which component had failed, the fault type and severity
level and the time it occurred from the MIB-II restart time.
Because many of the failures need to be described in detail
for troubleshooting, an alarm log is written with supplemental
information. The trap and log are correlated based on the
alarm time."
::= {tpTraps 1}
qualityOfService NOTIFICATION-TYPE
OBJECTS
{
tpAlarmId,
tpAlarmCatId,
tpAlarmCatName,
tpAlarmCatDesc,
tpAlarmSet,
tpAlarmNotify,
tpAlarmSeverity,
tpAlarmReported,
tpComponentId,
tpComponentType,
tpCompMMLName,
tpCompDesc,
tpCompParentId,
tpAlarmTime
}
STATUS current
DESCRIPTION
"Notification when there is a failure in the quality of service.
This shows which component had failed, its operational status,
fault type and severity level and the time it occurred from the
MIB-II restart time. Because many of the failures need to be
described in detail for troubleshooting, an alarm log is written
with supplemental information. The trap and log are correlated
based on the alarm time."
::= {tpTraps 2}
processingError NOTIFICATION-TYPE
OBJECTS
{
tpAlarmId,
tpAlarmCatId,
tpAlarmCatName,
tpAlarmCatDesc,
tpAlarmSet,
tpAlarmNotify,
tpAlarmSeverity,
tpAlarmReported,
tpComponentId,
tpComponentType,
tpCompMMLName,
tpCompDesc,
tpCompParentId,
tpAlarmTime
}
STATUS current
DESCRIPTION
"Notification of a process fault. This shows which component had
failed, its operational status, fault type and severity level and
the time it occurred from the MIB-II restart time. Because many
of the failures need to be described in detail for troubleshooting,
an alarm log is written with supplemental information. The trap
and log are correlated based on the alarm time."
::= {tpTraps 3}
equipmentError NOTIFICATION-TYPE
OBJECTS
{
tpAlarmId,
tpAlarmCatId,
tpAlarmCatName,
tpAlarmCatDesc,
tpAlarmSet,
tpAlarmNotify,
tpAlarmSeverity,
tpAlarmReported,
tpComponentId,
tpComponentType,
tpCompMMLName,
tpCompDesc,
tpCompParentId,
tpAlarmTime
}
STATUS current
DESCRIPTION
"Notification of an equipment error in the TransPath system.
This shows which component had failed, its operational status,
fault type and severity level and the time it occurred from the
MIB-II restart time. Because many of the failures need to be
described in detail for troubleshooting, an alarm log is written
with supplemental information. The trap and log are correlated
based on the alarm time."
::= {tpTraps 4}
environmentError NOTIFICATION-TYPE
OBJECTS
{
tpAlarmId,
tpAlarmCatId,
tpAlarmCatName,
tpAlarmCatDesc,
tpAlarmSet,
tpAlarmNotify,
tpAlarmSeverity,
tpAlarmReported,
tpComponentId,
tpComponentType,
tpCompMMLName,
tpCompDesc,
tpCompParentId,
tpAlarmTime
}
STATUS current
DESCRIPTION
"Notification of an TransPath system.s environment problem.
This shows which component had failed, its operational status,
fault type and severity level and the time it occurred from the
MIB-II restart time. Because many of the failures need to be
described in detail for troubleshooting, an alarm log is written
with supplemental information. The trap and log are correlated
based on the alarm time."
::= {tpTraps 5}