Table Of Contents
Configuring the Licensing for this Integration
Cisco Unified Personal Communicator License Requirements
User License Requirements
Adjunct Licensing
Configuring the Licensing for this Integration
June 4, 2013
Cisco Unified Personal Communicator License Requirements
Cisco Unified Personal Communicator License Requirements
•
User License Requirements
•Adjunct Licensing
User License Requirements
Cisco Unified Communications Manager tracks the number of Cisco Unified Personal Communicator devices that are connected to it and compares it with the number of device licenses that have been purchased.
Table 2-1 describes the user license requirements for Cisco Unified Personal Communicator.
Table 2-1 Cisco Unified Personal Communicator user licensing requirements
|
Configuration
|
License Requirement
|
Description
|
Cisco Unified Personal Communicator basic functionality |
Cisco Unified Personal Communicator software license |
You will require one Cisco Unified Personal Communicator software license per user. The Cisco Unified Personal Communicator software license comes with one Cisco Unified Communications Manager Device License Unit (DLU). You need to assign Cisco Unified Personal Communicator capabilities for a user. This will consume one DLU. On Cisco Unified Communications Manager, you will need to upload the software license for a user, and then assign Cisco Unified Personal Communicator capabilities for a user. |
Cisco Unified Personal Communicator user feature license |
You will require one Cisco Unified Personal Communicator user feature license per user. This license is also known as a Cisco Unified Communications Manager phone device license. You upload this license on Cisco Unified Communications Manager. |
Softphone mode (optional) |
Cisco Unified Personal Communicator user feature license registered as Cisco Unified Communications Manager softphone |
In addition to the normal licensing requirements listed above, you require three Cisco Unified Communications Manager user feature licenses to register as a Cisco Unified Communications Manager softphone (three device licenses are consumed). |
Related Topics
•Adjunct Licensing
•Creating a Softphone Device for Each Cisco Unified Personal Communicator User
Adjunct Licensing
From Cisco Unified Communications Manager Release 6.0(1), you can associate a secondary device with a primary device and consume only one device license per device. This is also known as adjunct licensing. On Cisco Unified Communications Manager, you can configure adjunct licensing manually on the Phone Configuration window, using the AXL interface, or using the Bulk Administration Tool (BAT). For releases prior to Cisco Unified Communications Manager Release 6.0(1), three device licenses are consumed.
Adjunct licensing has these restrictions:
•You can associate up to two secondary softphone devices to a primary phone.
•You cannot delete the primary phone unless you remove the associated secondary softphone devices.
•The primary phone must be the device that consumes the most licenses. You cannot make the softphone device the primary phone and associate a Cisco Unified IP Phone as the secondary device.
•Secondary softphone devices are limited to Cisco IP Communicator, Cisco Unified Personal Communicator, and Cisco Unified Mobile Communicator.
Related Topics
•User License Requirements
•Creating a Softphone Device for Each Cisco Unified Personal Communicator User
What To Do Next
Obtain a license file. For more information, see the Installation Guide for Cisco Unified Presence Release 8.6.
