Administrator Guide for Cisco Unified Videoconferencing Manager Release 5.1 - Resource Manager Configuration Tool [Cisco Unified Videoconferencing Manager]

Table Of Contents

Resource Manager Configuration Tool

Overview of the Configuration Tool

Installing the Configuration Tool

Setting Up the Java Runtime Environment

Launching the Configuration Tool

Retrieving an Administrator Password

Uninstalling the Resource Manager Configuration Tool

Using the Configuration Tool

Using the System Configuration Tab

Using the General Settings Tab

Defining E-Mail Server Settings

Defining the Unconnected Endpoint Time Period

Specifying an IVR Message for Dial-in and Dial-out Endpoints

Defining Thresholds for Resource Allocation

Setting Table-Row Display

Setting the Command Delay

Setting the Parent Zone Authorization Filter

Setting the Log Level

Setting the In-Meeting Control Refresh Rate

Setting the Online Help Host URL

Using the Scheduling Settings Tab

Accessing the Scheduling Settings Tab

Changing Call Authorization Settings

Modifying Default Meeting Settings

Modifying Default Recurring Meeting Settings

Using the UI Settings Tab

Using the Customized Settings Tab

Including and Removing Custom Time Zones

Customizing Branding

Customizing Billing

Using the Database Settings Tab

Using the Security Settings Tab

Using the CDR Configuration Tab

Resource Manager Configuration Tool

This appendix provides information on the requirements, setup and use of the Resource Manager Configuration Tool. The topics in this section include:

•Overview of the Configuration Tool

•Installing the Configuration Tool

•Uninstalling the Resource Manager Configuration Tool

•Using the Configuration Tool

•Using the System Configuration Tab

•Using the CDR Configuration Tab

Overview of the Configuration Tool

During the initial installation of Cisco Unified Videoconferencing Manager, network environment settings that are defined and configurable elements, such as page length and meeting identifiers, are set to default values. This enables Resource Manager to run upon installation without need for additional configuration.

The Resource Manager Configuration Tool, a client-server application that is based on Java™ Web Start, enables the system administrator to configure Resource Manager system settings, set CDR preferences, and modify default value settings.

Installing the Configuration Tool

This section includes procedures related to the installation of the Resource Manager Configuration Tool.

Setting Up the Java Runtime Environment

Java Runtime Environment must be installed on the client machine before you can use the Resource Manager Configuration Tool. The setup of the Java Runtime Environment is the first part of the installation process.

Procedure

Step 1 Go to http://cuvcmrm_serverhost:port/cuvcmrm-config.

Step 2 The first time you access the Resource Manager Configuration Tool, it detects whether or not Java Runtime Environment is installed on the client machine (such as the user's computer).

If Java Runtime Environment is not installed on the client machine, a download message appears.

Step 3 In the message window, click Install Java Runtime Environment.

Step 4 On the Java download web page, click download.

The Java Runtime Environment is installed on the client machine (your computer).

Step 5 To return to the Resource Manager Configuration Tool, in the Java download web page, click previous page.

Launching the Configuration Tool

The Resource Manager Configuration Tool is accessible from any client machine on which the Java Web Start application is installed.

Procedure

Step 1 Go to http://cuvcmrm_serverhost:port/cuvcmrm-config.

The Resource Manager Configuration Tool launch page appears.

Step 2 Click Launch Resource Manager Configuration Tool.

A message window that includes a progress bar appears. The Resource Manager Configuration Tool automatically checks for the latest version of the Java Web Start application on the client machine, and then starts the Resource Manager Configuration Tool.

Step 3 If a warning message appears stating that the digital signature is invalid and asking if you want to run the application, click Run.

Note To avoid the appearance of this message upon launch of the Resource Manager Configuration Tool from the same site address, in the message window, click Always trust content from this publisher, and then click Run.

Step 4 On the Resource Managerl launch page, click Launch Resource Manager Configuration Tool.

A welcome splash screen appears and then a message that a connection to the Resource Manager is being established.

Step 5 In the login window that appears, in the Login ID field, enter your login ID and in the Password field, enter your administrator password.

Step 6 Click Login.

The Resource Manager Configuration Tool window opens.

Retrieving an Administrator Password

A forgotten administrator password can be retrieved by using the following procedure.

Procedure

Step 1 In the login window, click the down-arrow to open the lower part of the login window.

Step 2 In the Send Admin Password for Login ID field, enter your login ID.

Step 3 Click Send to send the administrator password to the email address associated with the login ID.

Uninstalling the Resource Manager Configuration Tool

This section describes how to uninstall the Resource Manager Configuration Tool when you are working with Java Runtime Environment.

Procedure

Step 1 From the Microsoft Windows operating system Start menu, go to Settings > Control Panel > Add or Remove Programs.

Step 2 From the list of programs, select Resource Manager Configuration Tool, and then click Remove.

The Resource Manager Configuration Tool is removed from the operating system.

Using the Configuration Tool

The Resource Manager Configuration Tool consists of the following tabs:

•System Configuration—See the "Using the System Configuration Tab" section.

•CDR Configuration—See the "Using the CDR Configuration Tab" section.

Using the System Configuration Tab

The System Configuration tab is used for defining system configuration settings for Resource Manager. The System Configuration tab contains the following sub-tabs:

•General Settings—See the "Using the General Settings Tab" section.

•Scheduling Settings—See the "Using the Scheduling Settings Tab" section.

•UI Settings—See the "Using the UI Settings Tab" section.

•Customized Settings—See the "Using the Customized Settings Tab" section.

•Database Settings—See the "Using the Database Settings Tab" section.

•Security Settings—See the "Using the Security Settings Tab" section.

•SNMP Trap Servers Settings—See the "Using the CDR Configuration Tab" section.

Using the General Settings Tab

On the General Settings tab, you can define and modify general system settings for the Resource Manager server.

Defining E-Mail Server Settings

On the General Settings tab, in the E-Mail Server Settings section, you can define settings that are used by Resource Manager to send e-mail notifications, such as meeting reservations and meeting updates, to users and administrators.

Procedure

Step 1 To designate the host, in the Host field, enter an IP address or domain name for use as the mail server address.

Step 2 To designate the mail server communications port to be used, in the Port field, enter the port name.

Step 3 To enable access to the e-mail server, in the Login ID field, enter the e-mail server Login ID and then in the Password field, enter the email server Password.

Step 4 For an e-mail notification to be sent to the meeting organizer in the event of a meeting failure, check E-mail upon meeting failure for meeting organizer, and then check one or more of the following meeting-failure check boxes:

–Meeting creation

–EP abnormal connection

–EP connection

•Dial-in considered—This check box is only active if you check EP connection.

If you check Dial-in considered, dial-in connections are considered as endpoints and email notifications are sent in the case of a dial-in connection failure.

In the event of a meeting failure, the relevant e-mail notifications are sent according to your selection.

Step 5 Click Save.

Defining the Unconnected Endpoint Time Period

If there is a connection request, and an endpoint does not respond within the designated time-out period, the system classifies the endpoint as an unconnected endpoint.

Procedure

Step 1 In the EP Unconnected Time Out field, enter a value in seconds. If an endpoint is does not respond after the specified period of time, the endpoint is considered unconnected.

Step 2 Click Save.

Specifying an IVR Message for Dial-in and Dial-out Endpoints

This section enables you to configure Resource Manager to play an IVR (interactive voice response) message when a user joins a meeting. These messages are in the MCU and are identified according to the message index used by administration.

Procedure

Step 1 To specify the IVR message to be received by dial-in endpoints, in the IVR message index section, in Message index for Dial-in endpoints, enter the message-index number of the message.

Step 2 To specify the IVR message to be received by dial-out endpoints, in the IVR message index section, in Message index for Dial-out endpoints, enter the message-index number of the message.

Step 3 Click Save.

Defining Thresholds for Resource Allocation

If more than one MCU is able to host a meeting, Resource Manager allocates the meeting according to a load balancing principle that takes into account threshold definitions. If the maximum threshold is exceeded, the Resource Manager uses the ports of a single MCU until they are all in use, and then continues to another MCU. In this way, space is reserved on other MCUs for larger meetings, for example, and any unnecessary spanning of ports on multiple MCUs is prevented.

Procedure

Step 1 To define the minimum threshold value, in the Resource Allocation section, in the Low-Usage Threshold field, enter a percentage of the total MCU ports permitted for scheduling by Resource Manager at any given time.

Step 2 To define the maximum threshold value, in the Max. Reservation Threshold field, enter a percentage of the total MCU ports permitted for scheduling by Resource Manager at any given time. The default is 80%; 20% of total port resources are reserved for extended meetings or additional unscheduled resourcing needs.

Step 3 Click Save.

Note If a meeting spans multiple MCUs for purposes of bandwidth optimization, an additional port is required on each MCU. For example, for a meeting that spans two MCUs, and where there are three participating endpoints using ports on one MCU and four participating endpoints using ports on another MCU, 9 ports are required (7 endpoints + 2 MCUs).

Setting Table-Row Display

The number of rows that are displayed in tables in Resource Manager, such as tables on the All Meetings tabs in Resource Manager, is designated in the Display Setting section.

Procedure

Step 1 In the Display Settings section, in the Number of table rows per page field, enter a row quantity.

Tables in Resource Manager are displayed with the specified number of rows.

Step 2 Click Save.

Setting the Command Delay

You can define the amount of time that Resource Manager waits between the sending of internal messages to an MCU.

Procedure

Step 1 In the Delay between two commands from Resource Manager to MCU field, enter a time in milliseconds.

Step 2 Click Save.

Setting the Parent Zone Authorization Filter

The setting is only applicable when working with the Cisco IOS H.323 Gatekeeper. In a hierarchical mode, this setting determines whether or not the parent zone prefix should be added when going from a child gatekeeper to a parent gatekeeper during multi-zone navigation. This is useful for Resource Manager to determine the dial-out string when a terminal is invited.

Setting the Log Level

You can select from three levels of detail for a log file. The more detailed a log file, the larger the log file.

Procedure

Step 1 In the Log Level section, select from one of the following options

–WARN—This is the standard, recommended setting in most cases.

–INFO—This setting includes more detailed information in the log file.

–DEBUG—This setting includes issue details in the log file and produces the most detailed log.

Step 2 Click Save.

Setting the In-Meeting Control Refresh Rate

You can define the time interval between refreshes of the In-Meeting Control window.

Procedure

Step 1 In the Refresh In-Meeting Control window every xxx seconds field, enter the number of seconds that the In-Meeting Control window is displayed before the next refresh.

Step 2 Click Save.

Setting the Online Help Host URL

You can point the online help files to a remote URL. It is recommended that you do not customize the online help host URL unless you have a copy of the online help files to which to target.

Using the Scheduling Settings Tab

On the Scheduling Settings tab, the system administrator configures basic system settings for the Resource Manager server.

Accessing the Scheduling Settings Tab

To open the Scheduling Settings tab, in the Resource Manager Configuration Tool, click System Configuration > Scheduling Settings.

Note The values displayed on the tab are the values currently in the system.

Changing Call Authorization Settings

By default, endpoint initiated calls and MCU-to-endpoint calls require authorization by Resource Manager before they are admitted into a Resource Manager scheduled meeting, and dial-in calls from unresolved PSTN/ISDN terminals are not authorized. If required, you can remove the need for authorization of these types of calls, and thereby improve performance.

Procedure

Step 1 To admit endpoint-initiated calls, which include point-to-point and multi-point calls, without authorization by Resource Manager, check Allow Endpoint Initiated Calls.

Resource allocation is performed in the same way as it is for ad-hoc calls initiated by Resource Manager. To admit endpoint-initiated multiple calls, check Allow Endpoint Initiated Multipoint Calls.

Step 2 To set the duration of endpoint initiated calls, in the Duration of Endpoint Initiated Calls field, enter a value in minutes. The default value is 30 minutes. Resource Manager uses this value in resource allocation and meeting creation.

Step 3 Check Authorize MCU Calls if only Resource Manager is the authorizer of all MCU conferences. By default, Authorized MCU Calls is not checked. Making Resource Manager the authorizer of all MCUs requires the restart of all the MCUs in order for the change to take effect.

Step 4 To admit calls from unresolved PSTN ISDN terminal calls that do not have sufficient source information, check Admit Unresolved PSTN/ISDN Calls.

Note For unresolved PSTN/ISDN calls to be admitted, even without the need for authorization, there must be sufficient, available resources, such as additional reserved PSTN/ISDN ports or PSTN/ISDN ports that become available because terminals are deleted from a current meeting.

Step 5 Click Save.

Modifying Default Meeting Settings

In the Meeting Scheduling section, you can change default meetings settings.

Procedure

Step 1 From the Default Dialing Mode list, select Dial-in or Dial-out.

If you select Dial-in, meeting participants enter a meeting by dialing into the meeting.

If you select Dial-out, the Resource Manager system dials out to meeting participants.

Step 2 In the Meeting ID Length field, enter a value for the number of characters allowed in meeting ID strings.

Step 3 In the Meeting ID Prefix field, enter a numeric value for the meeting prefix. The prefix must be shorter than the number specified in the Meeting ID Length field.

Step 4 In the Minimum # Terminals allowed in a Scheduled Meeting field, enter the minimum number of terminals that must be selected in the Resource Manager interface for a scheduled meeting to be considered valid.

Step 5 In the Maximum # Terminals allowed in a Scheduled Meeting field, enter the maximum number of terminals allowed to take part in a scheduled meeting.

Step 6 In the Minimum # Terminals allowed in an Ad-Hoc Meeting field, enter the minimum number of terminals that must be selected in the Resource Manager interface for an ad-hoc scheduled meeting to be considered valid.

Step 7 In the Maximum # Terminals allowed in an Ad-Hoc Meeting field, enter the maximum number of terminals allowed to take part in an ad-hoc meeting.

Step 8 To specify the amount of time prior to the scheduled start of a meeting that the meeting actually begins, in the Launch Meetings <n> Minutes before scheduled start field, enter a value in minutes.

Step 9 To specify the amount of time that a meeting can be extended after the scheduled end of the meeting, in the Meeting Auto Extension Length field, enter a value in minutes.

Step 10 In the Allowable Scheduling Interval field, from the From list, select a unit of time (Minutes, Hours or Days) and then enter a value for the minimum amount of time allowed between the scheduling of a meeting and the meeting's scheduled start-time. From the To list, select a unit of time (Minutes, Hours or Days) and then enter a value for the maximum amount of time allowed between the scheduling of a meeting and the meeting's scheduled start-time.

Note Allowable Scheduling Interval settings do not apply to ad-hoc meetings.

Step 11 To set the minimum and maximum length for a scheduled meeting, in the Allowable Duration for a Scheduled Meeting field, From list, select a unit of time (Minutes, Hours or Days) and then enter a value for the minimum duration of a scheduled meeting. From the To list, select a unit of time (Minutes, Hours or Days), and then enter a value for the maximum duration of a scheduled meeting.

Step 12 To set the minimum and maximum length for an ad-hoc meeting, in the Allowable Duration for an Ad-Hoc Meeting field, from the From list, select a unit of time (Minutes, Hours or Days) and then enter a value for the minimum duration of a scheduled meeting. From the To list, select a unit of time (Minutes, Hours or Days), and then enter a value for the maximum duration of an ad-hoc meeting.

Step 13 To define the duration of time a meeting is allowed to remain in Waiting Room mode until the meeting host joins, click Waiting Room Timeout, and then enter a value in the <n> Minutes After The Waiting Room Start field.

Note If the host does not join within the specified period of time, the meeting ends.

Step 14 To enable Resource Manager to automatically recycle reserved ports that are not in use for a certain period of time after a meeting starts, configure the Shrink Reserve Port field.

Step 15 Click Save.

Modifying Default Recurring Meeting Settings

You can modify the default value for the period of time for which resources are allocated, and for which email notifications detail upcoming meeting instances for participants.

Procedure

Step 1 In the Recurring Meeting Scheduling section, in the Schedule Recurring Meetings field, enter a value in days. This value determines the number of days in advance that a recurring meeting can be scheduled. The maximum value is 730 days (2 years).

Step 2 Click Save.

Using the UI Settings Tab

On the UI Settings tab, you can simplify the Resource Manager web interface by defining which windows in the following sections of the Resource Manager user interface are hidden from the user.

•IP Topology in Admin > Network Management

•Gatekeeper Definition > Gatekeeper/SIP server tab in Admin > Resource Management > Gatekeeper/SIP server

•Gateway Definition tab in Admin > Resource Management

•ISDN Topology tab in Admin > Network Management. The ISDN Topology tab is only displayed when the gateway is enabled

•Terminal Definition tab in Admin > Resource Management

•All Meetings section accessible via the Admin sidebar menu

•User Management section accessible via the Admin sidebar menu

•Advanced Settings section accessible via the Admin sidebar menu.

•Other Settings tab in the Scheduling a New Meeting and in Meeting Details windows.

•Customization Tool button on upper-right of the application window that provides access to the Customization Tool window in which you can customize terminology in the Resource Manager web interface.

•Meeting Scheduling and Meeting Templates sections accessible via the User sidebar menu

•My Meetings section accessible via the User sidebar menu

The following procedure describes how to perform basic functions on the UI Settings tab:

Procedure

Step 1 Click the UI Settings tab.

Step 2 To hide a Resource Manager Web user interface area listed on the UI Settings tab, uncheck the relevant check box.

Step 3 To display a Resource Manager Web user interface area listed on the UI Settings tab, uncheck the relevant check box.

Step 4 Click Save.

Using the Customized Settings Tab

On the Customized Settings tab, you can add, delete or modify time zone settings.

Including and Removing Custom Time Zones

The Customized Time Zone(s) area lists Java standard time zones, as well as custom defined time zones.

Procedure

Step 1 To view a time zone profile, click a time zone in the Customized Time Zone section.

Step 2 Use the left- and right-pointing arrows to assign or unassign a time zone to the select list. Only selected time zones are displayed in the web interface in the user, terminal, and meeting time zone fields. You can define a subset of all available time zones in the Select Time Zones list. This enables you to expose only the relevant time zones to the end users in the web interface.

Step 3 To add an available time zone to the list, click New located below the Available Time Zones list.

A Configuration Tool window opens in which you define the custom time zone.

Step 4 In the Time Zone Name field, enter the name of the new time zone.

Note A time zone name cannot be changed after it is saved.

Step 5 To define the time difference in relation to Greenwich Mean Time (GMT), in the Time Difference from GMT section, select an hour and a minute value.

Step 6 If the time zone takes into account daylight saving time, check Observes Daylight Saving.

The fields in the lower section of the window become active.

Step 7 In the Daylight Saving field, enter the daylight saving time value for the time zone, in minutes.

Step 8 To specify when daylight savings time begins, in the DST Start Time section, click one of the option buttons, depending on how you prefer the date and time to be displayed, and then select from the date and time lists to specify the precise start time.

Step 9 To specify when daylight savings time ends, in the DST End Time section, click one of the options buttons, depending on how you prefer the date and time to be displayed, and then select from the date and time lists to specify the precise end time.

Note It is recommended that you select the same date and time display for both the start and end times.

Step 10 Click Save.

Step 11 To delete an available time zone from the list, select a custom defined time zone from the Available Time Zones list and then click Remove located below the Available Time Zones list.

To delete a select time zone from the list, select a custom defined time zone in the Select Time Zones list and then click Remove located below the Select Time Zones list.

Step 12 Click Close.

On the Custom Settings tab, the new time zone appears in the list in the Custom Time Zones area.

To delete a time zone from the Custom Time Zones list, before you save your settings, click on the time zone in the list, and then click Remove.

To reset Custom Time Zones to the original list, before you save your settings, click Reset to undo settings.

Caution If you create a custom time zone that has the same name as the key string in a default Java time zone, the new custom time zone overrides the rules of the default Java time zone.

Caution Because the start time for daylight saving time in the U.S.A. is scheduled to change in the year 2007, the changes that reflect the new daylight saving time rules must be made in the definition of a custom time zone and then saved with a name that is identical to the main string of the Java default time zone.

Customizing Branding

Customized branding is only possible if it is part of the Resource Manager license agreement.

In the Branding Customized section, you can select a product or vendor logo to appear in Resource Manager.

For use in Resource Manager, the logo must be a .gif file with a maximum height of 45 pixels and a maximum width of 250 pixels.

Procedure

Step 1 In the Product Logo File Name field, enter the name of a file that contains the logo, or click Browse to select the file.

Step 2 In the URL field, enter a URL for the company that provides the branded logo and can authorize its use.

Step 3 If you want to restore the vendor logo default, check Reset to Default.

Note The Vendor logo branding check box is only active if the license permits vendor logo branding. You can also change the product logo in Resource Manager, in the Admin > Advanced Settings, on the Look and Feel tab.

Customizing Billing

You can customize some aspects of billing for meeting scheduling, including a custom billing field label, and the value format.

Procedure

Step 1 From the Billing Code Field property list, select one of the following display rules:

–Show the field as mandatory

–Show the field as optional

–Don't show the field

Step 2 To include a customized field label, click Customized Field Label, and then in the field that becomes active, enter the custom text for the billing code field.

Step 3 In the Field Length field, enter the maximum number of characters allowed in the Billing Code field.

Step 4 If you want the field length to be restricted according the maximum field length that you specify, check Enforce Full Length.

Step 5 From the Field Type list, select one of the following options for a permissible field code

–Any

–Alphabetic

–Alphanumeric

–Numeric

Step 6 Click Save.

Using the Database Settings Tab

On the Database Settings tab, you can configure database server settings.

Procedure

Step 1 In the Server name field, the default database server name appears and can be modified if necessary.

Step 2 In the Server Port field, the database port number of the database server automatically appears.

Step 3 In the Connection Account field, enter the user account name used by Resource Manager to connect to the database. "Root" appears by default.

Step 4 In the Connection Password field, enter a password for use by Resource Manager when a connection to the database server is established.

Step 5 To make sure the database configuration is correct, click Test.

A message window shows the test results.

Step 6 To revise the settings on the Database Settings tab, click Reset. The values on the tab are reset.

Step 7 Click Save.

Step 8 To apply changes, restart Resource Manager.

Using the Security Settings Tab

On the Security Settings tab, you configure password and other security settings.

Procedure

Step 1 On the System Configuration tab, click the Security Settings tab.

Step 2 For a password to appear in the user profile, check Display password in user profile.

Step 3 To enable password modification in the user profile, click Modify password in user profile.

Step 4 To restrict passwords to secure passwords only, check Allow only secure passwords.

Step 5 In the Minimum password length field, enter the total number of characters and digits allowed in a password.

Step 6 In the Password to expire in <n> day(s) field, enter a value in days. This is the amount of time that a password is valid.

Step 7 In the Maximum Login attempts field, enter the maximum number of times a user can enter an incorrect password, after which Resource Manager rejects further attempts.

Step 8 In the Cannot be the same as the last <n> password(s) field, enter the amount of previous passwords that are considered in relation to a new password.

Step 9 If you want a log in message to appear in Resource Manager, check display login message, and then in the free-text field that becomes active, enter the log in message text.

Step 10 Click Save.

Using the CDR Configuration Tab

Call Data Records (CDRs) are created and stored in XML format by Resource Manager when the Enable XML CDR option is checked in the CDR Production tab (see the "Using the CDR Configuration Tab"). The CDRs contain comprehensive records of each call. These records are useful for analyzing and tracking system use, as well as for supporting diagnostics and billing.For detailed technical information about the XML tags used in the CDRs, and their attributes, see Appendix B, "CDR XML Tags and Attributes".

On the CDR Production tab, the system administrator enables or disables the production of CDRs and adjusts CDR-related variables.

Procedure

Step 1 To enable the production of CDRs in XML format, check Enable XML CDRs.

Step 2 In the Minimum connection required to produce CDRs field, enter a value in seconds for the minimum length of time a terminal must be connected before an entry for that terminal is created in the Actual Information section of the CDR.

If the terminal is connected to a meeting for the specified minimum time or longer, the CDR records the actual connection time as the total connection time for that terminal.

If a terminal is connected to a meeting for less than the specified minimum time, the CDR records the total connection time for that terminal as zero in the CDR.

Step 3 In the File prefix name field, the default prefix "CDR" appears. Enter a different prefix, if required.

The prefix appears before ".xml" in the CDR file name.

Note A standard Resource Manager installation creates a directory named Resource Manager in the Program Files directory (for example, C:\Program Files\Cisco\Cisco Unified Videoconferencing Manager\Resource Manager). CDR files are stored in a default sub-directory cdrdata. For example, C:\Program Files\Resource Manager\cdrdata\cdrfilename.xml.

Step 4 To specify how often CDRs are produced, choose one of the following options:

–One file per meeting—One CDR file is created for each meeting occurrence.

–One file every day—This is the default selection. The CDR file contains information for every scheduled meeting within a 24-hour period.

Note CDR file names are labeled by date, followed by a sequential identifier.

Note Filename suffixes are sequential regardless of how often a CDR is produced, and even if a different CDR production-time option is selected.

Step 5 To allow streaming to a Radius server for billing purposes, check Use RADIUS server.

The related fields become active.

Step 6 In the IP Address field, enter the IP address for the Radius server.

Step 7 In the Port field, enter the port designated for use by the Radius server.

Step 8 In the Shared Secret field, enter a password for the Radius server.

The shared secret password is used by Resource Manager and the Radius server exclusively, as part of the security system.

Note If you do not select Use RADIUS server, the IP Address, Port and Shared Secret fields include read-only information by default.

	Administrator Guide for Cisco Unified Videoconferencing Manager Release 5.1
	Resource Manager Configuration Tool
Administrator Guide for Cisco Unified Videoconferencing Manager Release 5.1 Preface Introducing the Cisco Unified Videoconferencing Manager Part 1: Resource Manager Resource Manager Overview Network Manager Configuring the Gatekeeper Configuring an MCU Configuring a Gateway Configuring Endpoints User Management All Meetings Advanced Settings Resource Manager Configuration Tool Part 2: Network Manager Network Manager Overview Network Table View Network Tree View Network Map View Alarms View Conferences and Calls View Settings View Finding and Managing Elements Part 3: Resource Manager Appendices Provisioning Users via a Directory Server CDR XML Tags and Attributes Index	Download this chapter Resource Manager Configuration Tool Download the complete book Administrator Guide for Cisco Unified Videoconferencing Manager Release 5.1 (PDF - 4 MB) Table Of Contents Resource Manager Configuration Tool Overview of the Configuration Tool Installing the Configuration Tool Setting Up the Java Runtime Environment Launching the Configuration Tool Retrieving an Administrator Password Uninstalling the Resource Manager Configuration Tool Using the Configuration Tool Using the System Configuration Tab Using the General Settings Tab Defining E-Mail Server Settings Defining the Unconnected Endpoint Time Period Specifying an IVR Message for Dial-in and Dial-out Endpoints Defining Thresholds for Resource Allocation Setting Table-Row Display Setting the Command Delay Setting the Parent Zone Authorization Filter Setting the Log Level Setting the In-Meeting Control Refresh Rate Setting the Online Help Host URL Using the Scheduling Settings Tab Accessing the Scheduling Settings Tab Changing Call Authorization Settings Modifying Default Meeting Settings Modifying Default Recurring Meeting Settings Using the UI Settings Tab Using the Customized Settings Tab Including and Removing Custom Time Zones Customizing Branding Customizing Billing Using the Database Settings Tab Using the Security Settings Tab Using the CDR Configuration Tab Resource Manager Configuration Tool This appendix provides information on the requirements, setup and use of the Resource Manager Configuration Tool. The topics in this section include: •Overview of the Configuration Tool •Installing the Configuration Tool •Uninstalling the Resource Manager Configuration Tool •Using the Configuration Tool •Using the System Configuration Tab •Using the CDR Configuration Tab Overview of the Configuration Tool During the initial installation of Cisco Unified Videoconferencing Manager, network environment settings that are defined and configurable elements, such as page length and meeting identifiers, are set to default values. This enables Resource Manager to run upon installation without need for additional configuration. The Resource Manager Configuration Tool, a client-server application that is based on Java™ Web Start, enables the system administrator to configure Resource Manager system settings, set CDR preferences, and modify default value settings. Installing the Configuration Tool This section includes procedures related to the installation of the Resource Manager Configuration Tool. Setting Up the Java Runtime Environment Java Runtime Environment must be installed on the client machine before you can use the Resource Manager Configuration Tool. The setup of the Java Runtime Environment is the first part of the installation process. Procedure Step 1 Go to http://cuvcmrm_serverhost:port/cuvcmrm-config. Step 2 The first time you access the Resource Manager Configuration Tool, it detects whether or not Java Runtime Environment is installed on the client machine (such as the user's computer). If Java Runtime Environment is not installed on the client machine, a download message appears. Step 3 In the message window, click Install Java Runtime Environment. Step 4 On the Java download web page, click download. The Java Runtime Environment is installed on the client machine (your computer). Step 5 To return to the Resource Manager Configuration Tool, in the Java download web page, click previous page. Launching the Configuration Tool The Resource Manager Configuration Tool is accessible from any client machine on which the Java Web Start application is installed. Procedure Step 1 Go to http://cuvcmrm_serverhost:port/cuvcmrm-config. The Resource Manager Configuration Tool launch page appears. Step 2 Click Launch Resource Manager Configuration Tool. A message window that includes a progress bar appears. The Resource Manager Configuration Tool automatically checks for the latest version of the Java Web Start application on the client machine, and then starts the Resource Manager Configuration Tool. Step 3 If a warning message appears stating that the digital signature is invalid and asking if you want to run the application, click Run. Note To avoid the appearance of this message upon launch of the Resource Manager Configuration Tool from the same site address, in the message window, click Always trust content from this publisher, and then click Run. Step 4 On the Resource Managerl launch page, click Launch Resource Manager Configuration Tool. A welcome splash screen appears and then a message that a connection to the Resource Manager is being established. Step 5 In the login window that appears, in the Login ID field, enter your login ID and in the Password field, enter your administrator password. Step 6 Click Login. The Resource Manager Configuration Tool window opens. Retrieving an Administrator Password A forgotten administrator password can be retrieved by using the following procedure. Procedure Step 1 In the login window, click the down-arrow to open the lower part of the login window. Step 2 In the Send Admin Password for Login ID field, enter your login ID. Step 3 Click Send to send the administrator password to the email address associated with the login ID. Uninstalling the Resource Manager Configuration Tool This section describes how to uninstall the Resource Manager Configuration Tool when you are working with Java Runtime Environment. Procedure Step 1 From the Microsoft Windows operating system Start menu, go to Settings > Control Panel > Add or Remove Programs. Step 2 From the list of programs, select Resource Manager Configuration Tool, and then click Remove. The Resource Manager Configuration Tool is removed from the operating system. Using the Configuration Tool The Resource Manager Configuration Tool consists of the following tabs: •System Configuration—See the "Using the System Configuration Tab" section. •CDR Configuration—See the "Using the CDR Configuration Tab" section. Using the System Configuration Tab The System Configuration tab is used for defining system configuration settings for Resource Manager. The System Configuration tab contains the following sub-tabs: •General Settings—See the "Using the General Settings Tab" section. •Scheduling Settings—See the "Using the Scheduling Settings Tab" section. •UI Settings—See the "Using the UI Settings Tab" section. •Customized Settings—See the "Using the Customized Settings Tab" section. •Database Settings—See the "Using the Database Settings Tab" section. •Security Settings—See the "Using the Security Settings Tab" section. •SNMP Trap Servers Settings—See the "Using the CDR Configuration Tab" section. Using the General Settings Tab On the General Settings tab, you can define and modify general system settings for the Resource Manager server. Defining E-Mail Server Settings On the General Settings tab, in the E-Mail Server Settings section, you can define settings that are used by Resource Manager to send e-mail notifications, such as meeting reservations and meeting updates, to users and administrators. Procedure Step 1 To designate the host, in the Host field, enter an IP address or domain name for use as the mail server address. Step 2 To designate the mail server communications port to be used, in the Port field, enter the port name. Step 3 To enable access to the e-mail server, in the Login ID field, enter the e-mail server Login ID and then in the Password field, enter the email server Password. Step 4 For an e-mail notification to be sent to the meeting organizer in the event of a meeting failure, check E-mail upon meeting failure for meeting organizer, and then check one or more of the following meeting-failure check boxes: –Meeting creation –EP abnormal connection –EP connection •Dial-in considered—This check box is only active if you check EP connection. If you check Dial-in considered, dial-in connections are considered as endpoints and email notifications are sent in the case of a dial-in connection failure. In the event of a meeting failure, the relevant e-mail notifications are sent according to your selection. Step 5 Click Save. Defining the Unconnected Endpoint Time Period If there is a connection request, and an endpoint does not respond within the designated time-out period, the system classifies the endpoint as an unconnected endpoint. Procedure Step 1 In the EP Unconnected Time Out field, enter a value in seconds. If an endpoint is does not respond after the specified period of time, the endpoint is considered unconnected. Step 2 Click Save. Specifying an IVR Message for Dial-in and Dial-out Endpoints This section enables you to configure Resource Manager to play an IVR (interactive voice response) message when a user joins a meeting. These messages are in the MCU and are identified according to the message index used by administration. Procedure Step 1 To specify the IVR message to be received by dial-in endpoints, in the IVR message index section, in Message index for Dial-in endpoints, enter the message-index number of the message. Step 2 To specify the IVR message to be received by dial-out endpoints, in the IVR message index section, in Message index for Dial-out endpoints, enter the message-index number of the message. Step 3 Click Save. Defining Thresholds for Resource Allocation If more than one MCU is able to host a meeting, Resource Manager allocates the meeting according to a load balancing principle that takes into account threshold definitions. If the maximum threshold is exceeded, the Resource Manager uses the ports of a single MCU until they are all in use, and then continues to another MCU. In this way, space is reserved on other MCUs for larger meetings, for example, and any unnecessary spanning of ports on multiple MCUs is prevented. Procedure Step 1 To define the minimum threshold value, in the Resource Allocation section, in the Low-Usage Threshold field, enter a percentage of the total MCU ports permitted for scheduling by Resource Manager at any given time. Step 2 To define the maximum threshold value, in the Max. Reservation Threshold field, enter a percentage of the total MCU ports permitted for scheduling by Resource Manager at any given time. The default is 80%; 20% of total port resources are reserved for extended meetings or additional unscheduled resourcing needs. Step 3 Click Save. Note If a meeting spans multiple MCUs for purposes of bandwidth optimization, an additional port is required on each MCU. For example, for a meeting that spans two MCUs, and where there are three participating endpoints using ports on one MCU and four participating endpoints using ports on another MCU, 9 ports are required (7 endpoints + 2 MCUs). Setting Table-Row Display The number of rows that are displayed in tables in Resource Manager, such as tables on the All Meetings tabs in Resource Manager, is designated in the Display Setting section. Procedure Step 1 In the Display Settings section, in the Number of table rows per page field, enter a row quantity. Tables in Resource Manager are displayed with the specified number of rows. Step 2 Click Save. Setting the Command Delay You can define the amount of time that Resource Manager waits between the sending of internal messages to an MCU. Procedure Step 1 In the Delay between two commands from Resource Manager to MCU field, enter a time in milliseconds. Step 2 Click Save. Setting the Parent Zone Authorization Filter The setting is only applicable when working with the Cisco IOS H.323 Gatekeeper. In a hierarchical mode, this setting determines whether or not the parent zone prefix should be added when going from a child gatekeeper to a parent gatekeeper during multi-zone navigation. This is useful for Resource Manager to determine the dial-out string when a terminal is invited. Setting the Log Level You can select from three levels of detail for a log file. The more detailed a log file, the larger the log file. Procedure Step 1 In the Log Level section, select from one of the following options –WARN—This is the standard, recommended setting in most cases. –INFO—This setting includes more detailed information in the log file. –DEBUG—This setting includes issue details in the log file and produces the most detailed log. Step 2 Click Save. Setting the In-Meeting Control Refresh Rate You can define the time interval between refreshes of the In-Meeting Control window. Procedure Step 1 In the Refresh In-Meeting Control window every xxx seconds field, enter the number of seconds that the In-Meeting Control window is displayed before the next refresh. Step 2 Click Save. Setting the Online Help Host URL You can point the online help files to a remote URL. It is recommended that you do not customize the online help host URL unless you have a copy of the online help files to which to target. Using the Scheduling Settings Tab On the Scheduling Settings tab, the system administrator configures basic system settings for the Resource Manager server. Accessing the Scheduling Settings Tab To open the Scheduling Settings tab, in the Resource Manager Configuration Tool, click System Configuration > Scheduling Settings. Note The values displayed on the tab are the values currently in the system. Changing Call Authorization Settings By default, endpoint initiated calls and MCU-to-endpoint calls require authorization by Resource Manager before they are admitted into a Resource Manager scheduled meeting, and dial-in calls from unresolved PSTN/ISDN terminals are not authorized. If required, you can remove the need for authorization of these types of calls, and thereby improve performance. Procedure Step 1 To admit endpoint-initiated calls, which include point-to-point and multi-point calls, without authorization by Resource Manager, check Allow Endpoint Initiated Calls. Resource allocation is performed in the same way as it is for ad-hoc calls initiated by Resource Manager. To admit endpoint-initiated multiple calls, check Allow Endpoint Initiated Multipoint Calls. Step 2 To set the duration of endpoint initiated calls, in the Duration of Endpoint Initiated Calls field, enter a value in minutes. The default value is 30 minutes. Resource Manager uses this value in resource allocation and meeting creation. Step 3 Check Authorize MCU Calls if only Resource Manager is the authorizer of all MCU conferences. By default, Authorized MCU Calls is not checked. Making Resource Manager the authorizer of all MCUs requires the restart of all the MCUs in order for the change to take effect. Step 4 To admit calls from unresolved PSTN ISDN terminal calls that do not have sufficient source information, check Admit Unresolved PSTN/ISDN Calls. Note For unresolved PSTN/ISDN calls to be admitted, even without the need for authorization, there must be sufficient, available resources, such as additional reserved PSTN/ISDN ports or PSTN/ISDN ports that become available because terminals are deleted from a current meeting. Step 5 Click Save. Modifying Default Meeting Settings In the Meeting Scheduling section, you can change default meetings settings. Procedure Step 1 From the Default Dialing Mode list, select Dial-in or Dial-out. If you select Dial-in, meeting participants enter a meeting by dialing into the meeting. If you select Dial-out, the Resource Manager system dials out to meeting participants. Step 2 In the Meeting ID Length field, enter a value for the number of characters allowed in meeting ID strings. Step 3 In the Meeting ID Prefix field, enter a numeric value for the meeting prefix. The prefix must be shorter than the number specified in the Meeting ID Length field. Step 4 In the Minimum # Terminals allowed in a Scheduled Meeting field, enter the minimum number of terminals that must be selected in the Resource Manager interface for a scheduled meeting to be considered valid. Step 5 In the Maximum # Terminals allowed in a Scheduled Meeting field, enter the maximum number of terminals allowed to take part in a scheduled meeting. Step 6 In the Minimum # Terminals allowed in an Ad-Hoc Meeting field, enter the minimum number of terminals that must be selected in the Resource Manager interface for an ad-hoc scheduled meeting to be considered valid. Step 7 In the Maximum # Terminals allowed in an Ad-Hoc Meeting field, enter the maximum number of terminals allowed to take part in an ad-hoc meeting. Step 8 To specify the amount of time prior to the scheduled start of a meeting that the meeting actually begins, in the Launch Meetings <n> Minutes before scheduled start field, enter a value in minutes. Step 9 To specify the amount of time that a meeting can be extended after the scheduled end of the meeting, in the Meeting Auto Extension Length field, enter a value in minutes. Step 10 In the Allowable Scheduling Interval field, from the From list, select a unit of time (Minutes, Hours or Days) and then enter a value for the minimum amount of time allowed between the scheduling of a meeting and the meeting's scheduled start-time. From the To list, select a unit of time (Minutes, Hours or Days) and then enter a value for the maximum amount of time allowed between the scheduling of a meeting and the meeting's scheduled start-time. Note Allowable Scheduling Interval settings do not apply to ad-hoc meetings. Step 11 To set the minimum and maximum length for a scheduled meeting, in the Allowable Duration for a Scheduled Meeting field, From list, select a unit of time (Minutes, Hours or Days) and then enter a value for the minimum duration of a scheduled meeting. From the To list, select a unit of time (Minutes, Hours or Days), and then enter a value for the maximum duration of a scheduled meeting. Step 12 To set the minimum and maximum length for an ad-hoc meeting, in the Allowable Duration for an Ad-Hoc Meeting field, from the From list, select a unit of time (Minutes, Hours or Days) and then enter a value for the minimum duration of a scheduled meeting. From the To list, select a unit of time (Minutes, Hours or Days), and then enter a value for the maximum duration of an ad-hoc meeting. Step 13 To define the duration of time a meeting is allowed to remain in Waiting Room mode until the meeting host joins, click Waiting Room Timeout, and then enter a value in the <n> Minutes After The Waiting Room Start field. Note If the host does not join within the specified period of time, the meeting ends. Step 14 To enable Resource Manager to automatically recycle reserved ports that are not in use for a certain period of time after a meeting starts, configure the Shrink Reserve Port field. Step 15 Click Save. Modifying Default Recurring Meeting Settings You can modify the default value for the period of time for which resources are allocated, and for which email notifications detail upcoming meeting instances for participants. Procedure Step 1 In the Recurring Meeting Scheduling section, in the Schedule Recurring Meetings field, enter a value in days. This value determines the number of days in advance that a recurring meeting can be scheduled. The maximum value is 730 days (2 years). Step 2 Click Save. Using the UI Settings Tab On the UI Settings tab, you can simplify the Resource Manager web interface by defining which windows in the following sections of the Resource Manager user interface are hidden from the user. •IP Topology in Admin > Network Management •Gatekeeper Definition > Gatekeeper/SIP server tab in Admin > Resource Management > Gatekeeper/SIP server •Gateway Definition tab in Admin > Resource Management •ISDN Topology tab in Admin > Network Management. The ISDN Topology tab is only displayed when the gateway is enabled •Terminal Definition tab in Admin > Resource Management •All Meetings section accessible via the Admin sidebar menu •User Management section accessible via the Admin sidebar menu •Advanced Settings section accessible via the Admin sidebar menu. •Other Settings tab in the Scheduling a New Meeting and in Meeting Details windows. •Customization Tool button on upper-right of the application window that provides access to the Customization Tool window in which you can customize terminology in the Resource Manager web interface. •Meeting Scheduling and Meeting Templates sections accessible via the User sidebar menu •My Meetings section accessible via the User sidebar menu The following procedure describes how to perform basic functions on the UI Settings tab: Procedure Step 1 Click the UI Settings tab. Step 2 To hide a Resource Manager Web user interface area listed on the UI Settings tab, uncheck the relevant check box. Step 3 To display a Resource Manager Web user interface area listed on the UI Settings tab, uncheck the relevant check box. Step 4 Click Save. Using the Customized Settings Tab On the Customized Settings tab, you can add, delete or modify time zone settings. Including and Removing Custom Time Zones The Customized Time Zone(s) area lists Java standard time zones, as well as custom defined time zones. Procedure Step 1 To view a time zone profile, click a time zone in the Customized Time Zone section. Step 2 Use the left- and right-pointing arrows to assign or unassign a time zone to the select list. Only selected time zones are displayed in the web interface in the user, terminal, and meeting time zone fields. You can define a subset of all available time zones in the Select Time Zones list. This enables you to expose only the relevant time zones to the end users in the web interface. Step 3 To add an available time zone to the list, click New located below the Available Time Zones list. A Configuration Tool window opens in which you define the custom time zone. Step 4 In the Time Zone Name field, enter the name of the new time zone. Note A time zone name cannot be changed after it is saved. Step 5 To define the time difference in relation to Greenwich Mean Time (GMT), in the Time Difference from GMT section, select an hour and a minute value. Step 6 If the time zone takes into account daylight saving time, check Observes Daylight Saving. The fields in the lower section of the window become active. Step 7 In the Daylight Saving field, enter the daylight saving time value for the time zone, in minutes. Step 8 To specify when daylight savings time begins, in the DST Start Time section, click one of the option buttons, depending on how you prefer the date and time to be displayed, and then select from the date and time lists to specify the precise start time. Step 9 To specify when daylight savings time ends, in the DST End Time section, click one of the options buttons, depending on how you prefer the date and time to be displayed, and then select from the date and time lists to specify the precise end time. Note It is recommended that you select the same date and time display for both the start and end times. Step 10 Click Save. Step 11 To delete an available time zone from the list, select a custom defined time zone from the Available Time Zones list and then click Remove located below the Available Time Zones list. To delete a select time zone from the list, select a custom defined time zone in the Select Time Zones list and then click Remove located below the Select Time Zones list. Step 12 Click Close. On the Custom Settings tab, the new time zone appears in the list in the Custom Time Zones area. To delete a time zone from the Custom Time Zones list, before you save your settings, click on the time zone in the list, and then click Remove. To reset Custom Time Zones to the original list, before you save your settings, click Reset to undo settings. Caution If you create a custom time zone that has the same name as the key string in a default Java time zone, the new custom time zone overrides the rules of the default Java time zone. Caution Because the start time for daylight saving time in the U.S.A. is scheduled to change in the year 2007, the changes that reflect the new daylight saving time rules must be made in the definition of a custom time zone and then saved with a name that is identical to the main string of the Java default time zone. Customizing Branding Customized branding is only possible if it is part of the Resource Manager license agreement. In the Branding Customized section, you can select a product or vendor logo to appear in Resource Manager. For use in Resource Manager, the logo must be a .gif file with a maximum height of 45 pixels and a maximum width of 250 pixels. Procedure Step 1 In the Product Logo File Name field, enter the name of a file that contains the logo, or click Browse to select the file. Step 2 In the URL field, enter a URL for the company that provides the branded logo and can authorize its use. Step 3 If you want to restore the vendor logo default, check Reset to Default. Note The Vendor logo branding check box is only active if the license permits vendor logo branding. You can also change the product logo in Resource Manager, in the Admin > Advanced Settings, on the Look and Feel tab. Customizing Billing You can customize some aspects of billing for meeting scheduling, including a custom billing field label, and the value format. Procedure Step 1 From the Billing Code Field property list, select one of the following display rules: –Show the field as mandatory –Show the field as optional –Don't show the field Step 2 To include a customized field label, click Customized Field Label, and then in the field that becomes active, enter the custom text for the billing code field. Step 3 In the Field Length field, enter the maximum number of characters allowed in the Billing Code field. Step 4 If you want the field length to be restricted according the maximum field length that you specify, check Enforce Full Length. Step 5 From the Field Type list, select one of the following options for a permissible field code –Any –Alphabetic –Alphanumeric –Numeric Step 6 Click Save. Using the Database Settings Tab On the Database Settings tab, you can configure database server settings. Procedure Step 1 In the Server name field, the default database server name appears and can be modified if necessary. Step 2 In the Server Port field, the database port number of the database server automatically appears. Step 3 In the Connection Account field, enter the user account name used by Resource Manager to connect to the database. "Root" appears by default. Step 4 In the Connection Password field, enter a password for use by Resource Manager when a connection to the database server is established. Step 5 To make sure the database configuration is correct, click Test. A message window shows the test results. Step 6 To revise the settings on the Database Settings tab, click Reset. The values on the tab are reset. Step 7 Click Save. Step 8 To apply changes, restart Resource Manager. Using the Security Settings Tab On the Security Settings tab, you configure password and other security settings. Procedure Step 1 On the System Configuration tab, click the Security Settings tab. Step 2 For a password to appear in the user profile, check Display password in user profile. Step 3 To enable password modification in the user profile, click Modify password in user profile. Step 4 To restrict passwords to secure passwords only, check Allow only secure passwords. Step 5 In the Minimum password length field, enter the total number of characters and digits allowed in a password. Step 6 In the Password to expire in <n> day(s) field, enter a value in days. This is the amount of time that a password is valid. Step 7 In the Maximum Login attempts field, enter the maximum number of times a user can enter an incorrect password, after which Resource Manager rejects further attempts. Step 8 In the Cannot be the same as the last <n> password(s) field, enter the amount of previous passwords that are considered in relation to a new password. Step 9 If you want a log in message to appear in Resource Manager, check display login message, and then in the free-text field that becomes active, enter the log in message text. Step 10 Click Save. Using the CDR Configuration Tab Call Data Records (CDRs) are created and stored in XML format by Resource Manager when the Enable XML CDR option is checked in the CDR Production tab (see the "Using the CDR Configuration Tab"). The CDRs contain comprehensive records of each call. These records are useful for analyzing and tracking system use, as well as for supporting diagnostics and billing.For detailed technical information about the XML tags used in the CDRs, and their attributes, see Appendix B, "CDR XML Tags and Attributes". On the CDR Production tab, the system administrator enables or disables the production of CDRs and adjusts CDR-related variables. Procedure Step 1 To enable the production of CDRs in XML format, check Enable XML CDRs. Step 2 In the Minimum connection required to produce CDRs field, enter a value in seconds for the minimum length of time a terminal must be connected before an entry for that terminal is created in the Actual Information section of the CDR. If the terminal is connected to a meeting for the specified minimum time or longer, the CDR records the actual connection time as the total connection time for that terminal. If a terminal is connected to a meeting for less than the specified minimum time, the CDR records the total connection time for that terminal as zero in the CDR. Step 3 In the File prefix name field, the default prefix "CDR" appears. Enter a different prefix, if required. The prefix appears before ".xml" in the CDR file name. Note A standard Resource Manager installation creates a directory named Resource Manager in the Program Files directory (for example, C:\Program Files\Cisco\Cisco Unified Videoconferencing Manager\Resource Manager). CDR files are stored in a default sub-directory cdrdata. For example, C:\Program Files\Resource Manager\cdrdata\cdrfilename.xml. Step 4 To specify how often CDRs are produced, choose one of the following options: –One file per meeting—One CDR file is created for each meeting occurrence. –One file every day—This is the default selection. The CDR file contains information for every scheduled meeting within a 24-hour period. Note CDR file names are labeled by date, followed by a sequential identifier. Note Filename suffixes are sequential regardless of how often a CDR is produced, and even if a different CDR production-time option is selected. Step 5 To allow streaming to a Radius server for billing purposes, check Use RADIUS server. The related fields become active. Step 6 In the IP Address field, enter the IP address for the Radius server. Step 7 In the Port field, enter the port designated for use by the Radius server. Step 8 In the Shared Secret field, enter a password for the Radius server. The shared secret password is used by Resource Manager and the Radius server exclusively, as part of the security system. Note If you do not select Use RADIUS server, the IP Address, Port and Shared Secret fields include read-only information by default.
	© 1992-2009 Cisco Systems, Inc. All rights reserved. Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks of Cisco Systems, Inc.