Table Of Contents

Configuring a Cisco Unified Videoconferencing Manager Prefix

Configuring a Cisco Unified Videoconferencing Manager Prefix

---

A virtual room prefix consists of a Cisco Unified Videoconferencing Manager prefix and a user ID. For example, if the Cisco Unified Videoconferencing Manager prefix is 68 and a user ID is 6209, this user virtual room number is automatically set to 686209.

---

Note The Cisco Unified Videoconferencing Manager prefix is unique for every Cisco Unified Videoconferencing Solution system.

---

You might need to change the Cisco Unified Videoconferencing Manager prefix for these reasons:

•To avoid a collision with existing meeting types (MCU or Gateway service IDs)

•To avoid a collision with existing H.323 room system numbers

Procedure

---

Step 1 In an internet browser, enter this address:

http://<your server IP>:8080/icm-cuvcmrm

Step 2 Click Launch Configuration Tool on the Resource Manager Configuration Tool Launch page.

Step 3 Click Run in the Security window.

Step 4 Enter the administrator login ID and password in the Resource Manager Configuration Tool window, and then click Login.

---

Note The default administrator login ID is "admin". No password is necessary by default.

---

Step 5 Click the Scheduling Settings tab in the Cisco Unified Videoconferencing Manager Configuration Tool window.

Step 6 Change a value in the Meeting ID Prefix field.

Step 7 Click Save.

Step 8 Click Save to confirm the change.

Step 9 Click Close in the Cisco Unified Videoconferencing Manager Configuration Tool window.

Step 10 Click Yes to confirm closing the Resource Manager Configuration tool.

---