The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
AC power cords A-13
form factor (figure) A-10
overview A-10
specifications A-11
100-MB SFP transceivers B-1 to B-3
10-GB transceivers B-10 to B-16
X2 transceivers B-10 to B-16
modules supported on B-10
optical transmit and receive specifications B-14
physical and environmental specifications table B-16
XENPAK transceivers B-10 to B-16
modules supported on B-10
physical form (figure) B-11
polish face types supported B-10
specifications and cabling distances table B-11
1300 W AC-input power supplies
AC power cords A-17
form factor (figure) A-14
overview A-13
specifications A-15
1300 W DC-input power supplies
form factor (figure) A-14
overview A-13
specifications A-16
AC power cords A-21
form factor (figure) A-19
overview A-18
power entry module A-18
removing and installing 4-3, 4-9
specifications A-19
See either GBIC transceivers or SFP transceivers
2500 W AC-input power supplies
AC power cords A-28
form factor (figure) A-23
overview A-23
specifications A-24
2500 W DC-input power supplies
form factor (figure) A-24
overview A-23
specifications A-25
2700 W AC-input power supplies
AC power cords A-35
form factor (figure) A-29
overview A-29
removing and installing 4-6
specifications A-31
2700 W DC-input power supplies
form factor (figure) A-30
overview A-29
specifications A-32
AC power cords A-40
form factor (figure) A-36
overview A-36
specifications A-37
4000 W AC-input power supplies
AC power cords A-46
form factor (figure) A-41
overview A-41
specifications A-42
4000 W DC-input power supplies
form factor (figure) A-42
installing 4-42
overview A-41
specifications A-44
6000 W AC-input power supplies
AC power cords A-53
chassis supported A-46
form factor (figure) A-47
overview A-46
specifications A-48
6000 W DC-input power supplies
specifications A-51
8700 W AC-input power supplies
AC power cords A-62
chassis supported A-54
form factor (figure) A-55
NEBS system ground restrictions A-55
overview A-54
relay controller box switch A-60
remote power cycling feature A-60
remote power cycling terminal block A-60
specifications A-55
AC power cords A-9
form factor (figure) A-5
overview A-5
removing and installing 4-3, 4-9
specifications A-6
overview A-5
removing and installing 4-3, 4-9, 4-15
specifications A-8
console port cable B-32
contents 3-5, B-32
repacking C-1
installing 4-78
removing 4-76
1000 W power supply A-13
1300 W power supply A-17
1400 W power supply A-21
2500 W power supply A-28
2700 W power supply A-35
3000 W power supply A-40
4000 W power supply A-46
6000 W power supply A-53
8700 W power supply A-62
950 W power supply A-9
illustrations A-63 to A-73
handling (figure) 4-12
heat dissipation D-2, D-3, D-4, D-15
installing 4-5, 4-13
LEDs E-4
redundancy A-73
removing 4-4
removing and replacing 4-9
source circuit requirements 2-22
troubleshooting E-4
weight (caution) 4-10
Catalyst 6503-E switches 1-12
Catalyst 6503 switches 1-6
Catalyst 6504-E switches 1-17
Catalyst 6506-E switches 1-28
Catalyst 6506 switches 1-22
Catalyst 6509-E switches 1-40
Catalyst 6509-NEB-A switches 1-53
Catalyst 6509-NEB switches 1-47
Catalyst 6509 switches 1-34
Catalyst 6509-V-E switches 1-59
Catalyst 6513-E switches 1-72
Catalyst 6513 switches 1-66
console port mode 2 B-35
DB-25 B-34
DB-9 B-34
modem B-35
installing 4-93
part numbers 4-93
recommended change intervals 4-98
Catalyst 6503 (figure) 2-6
Catalyst 6503-E (figure) 2-6
Catalyst 6503-E switches 1-12
Catalyst 6503 switches 1-7
Catalyst 6504-E (figure) 2-7
Catalyst 6504-E switches 1-17
Catalyst 6506 (figure) 2-7
Catalyst 6506-E (figure) 2-8
Catalyst 6506-E switches 1-29
Catalyst 6506 switches 1-23
Catalyst 6509 (figure) 2-9
Catalyst 6509-E (figure) 2-10
Catalyst 6509-E switches 1-41
Catalyst 6509-NEB (figure) 2-11
Catalyst 6509-NEB-A (figure) 2-12
Catalyst 6509-NEB-A switches 1-54
Catalyst 6509-NEB switches 1-48
Catalyst 6509 switches 1-35
Catalyst 6509-V-E switches 1-60
Catalyst 6513 (figure) 2-13
Catalyst 6513-E (figure) 2-14
Catalyst 6513-E switches 1-73
Catalyst 6513 switches 1-67
chassis requirements (table) 2-6
description 2-5
major E-5
minor E-5
attenuators, using with 1000BASE-ZX GBIC B-5
audience, document iii-xi
See crossbar brackets, shelf brackets, stabilizer brackets
branch circuit requirements 2-22
installing on Catalyst 6506-E switches 3-17
installing on Catalyst 6506 switches 3-17
installing on Catalyst 6509-E switches 3-21
installing on Catalyst 6509-NEB switches 3-27
installing on Catalyst 6509 switches 3-21
installing on Catalyst 6513 switches 3-45
cable management system (Catalyst 6509-NEB-A switches)
installing 3-31
replacing the cable guide 3-33
console ports B-32
requirements and guidelines 2-24
acoustic noise 1-12
airflow 1-12
airflow (figure) 2-6
chassis, dimensions 1-12
environmental specifications 1-11
fan trays 1-10
features table 1-9
form factor (figure) 1-8
physical characteristics 1-12
description 1-10
removing and installing 4-75
description 1-11
removing and installing procedures 4-3
shock and vibration specifications 1-12
specifications 1-11
supervisor engines 1-9
acoustic noise 1-6
airflow 1-7
airflow (figure) 2-6
chassis, dimensions 1-7
environmental specifications 1-6
fan trays 1-4
features table 1-3
form factor (figure) 1-2
physical characteristics 1-7
description 1-5
removing and installing 4-75
description 1-5
installation procedure, AC-input 4-5
installation procedure, DC-input 4-18
removal procedure, AC-input 4-3
removal procedure, DC-input 4-16
shock and vibration specifications 1-6
specifications 1-6
supervisor engines 1-3
acoustic noise 1-17
airflow 1-17
airflow (figure) 2-7
chassis, dimensions 1-17
environmental specifications 1-16
fan trays 1-15
features table 1-14
physical characteristics 1-17
description 1-15
shock and vibration specifications 1-16
specifications 1-16
supervisor engines 1-14
acoustic noise 1-28
airflow 1-29
airflow (figure) 2-8
environmental specifications 1-28
fan trays 1-26
features table 1-24
installing L brackets and cable guides 3-17
physical characteristics 1-29
power supplies 1-27
shock and vibration specifications 1-28
specifications 1-28
supervisor engines 1-25
acoustic noise 1-22
airflow 1-23
airflow (figure) 2-7
environmental specifications 1-22
fan trays 1-20
features table 1-19
form factor (figure) 1-18, 1-24
installing L brackets and cable guides 3-17
physical characteristics 1-23
power supplies 1-21
rack-mounting 3-48
repacking the switch C-1
shock and vibration specifications 1-22
specifications 1-22
supervisor engines 1-19
acoustic noise 1-40
airflow 1-41
airflow (figure) 2-10
environmental specifications 1-40
fan trays 1-38
features table 1-37
form factor (figure) 1-36
installing L brackets and cable guides 3-21
physical characteristics 1-41
power supplies 1-39
shock and vibration specifications 1-40
specifications 1-40
supervisor engines 1-37
acoustic noise 1-53
airflow 1-54
airflow (figure) 2-12
cable management system 3-31
dimensions, chassis 1-54
environmental specifications 1-53
fan trays 1-51
features table 1-50
form factor (figure) 1-49
installing the stabilizer kit 3-50
optional air filter 4-93
physical characteristics 1-54
description 1-52
installation procedure, DC-input 4-15
shock and vibration specifications 1-53
specifications 1-53
supervisor engines 1-50
weight 1-54
acoustic noise 1-47
airflow 1-48
airflow (figure) 2-11
environmental specifications 1-47
fan trays 1-45
features table 1-43
form factor (figure) 1-42
installing L brackets and cable guides 3-27
installing the stabilizer kit 3-50
physical characteristics 1-48
power supplies 1-46
shock and vibration specifications 1-47
specifications 1-47
supervisor engines 1-43
acoustic noise 1-34
airflow 1-35
airflow (figure) 2-9
environmental specifications 1-34
fan trays 1-32
features table 1-31
form factor (figure) 1-30
installing L brackets and cable guides 3-21
physical characteristics 1-35
power supplies 1-33
repacking the switch C-1
shock and vibration specifications 1-34
specifications 1-34
supervisor engines 1-31
acoustic noise 1-59
airflow 1-60
dimensions, chassis 1-60
environmental specifications 1-59
fan trays 1-57
features table 1-56
form factor (figure) 1-55
physical characteristics 1-60
description 1-58
shock and vibration specifications 1-59
specifications 1-59
supervisor engines 1-56
weight 1-60
acoustic noise 1-72
airflow 1-73
airflow (figure) 2-14
environmental specifications 1-72
fan trays 1-70
features table 1-69
form factor (figure) 1-68
installing the stabilizer it 3-50
physical characteristics 1-73
power supplies 1-71
shock and vibration specifications 1-72
specifications 1-72
supervisor engines 1-69
acoustic noise 1-66
airflow 1-67
airflow (figure) 2-13
environmental specifications 1-66
fan trays 1-64
features table 1-62
form factor (figure) 1-61
installing cable guides 3-45
installing the stabilizer kit 3-50
physical characteristics 1-67
power supplies 1-65
shock and vibration specifications 1-66
specifications 1-66
supervisor engines 1-62
category 5e static electricity caution 2-16, 2-18, 2-24, B-24, B-26
category 6a static electricity caution 2-16, 2-18, 2-24, B-24
category 6 static electricity caution 2-16, 2-18, 2-24, B-24, B-26
chassis airflow 2-5
checklist, site preparation 2-24
guidelines B-39
console ports B-32
modems 3-62
power sources 4-13
system ground 3-53
terminals 3-62
uplink ports 3-63
fiber optic B-39
LC optical B-30
MT-RJ B-29
SC optical B-28
See specific types of connectors
DB-25 adapters B-34
DB-9 adapter B-34
mode 1 pinout (table) B-34
port mode switches B-33
mode 1 B-34
mode 2 B-35
conventions, documentation iii-xii
installing 3-48
customer service E-7
description B-17
modules supported on B-17
physical form (figure) B-19
wavelength table B-19
description B-18
modules supported on B-18
physical form (figure) B-21
product numbers and color codes B-21
console port mode 1 B-34
connecting system ground 3-53
figure 4-20, 4-21
installing 4-24
LEDs E-4
redundancy A-73
removing 4-16, 4-19, 4-79
removing and replacing 4-9
troubleshooting E-4
weight (caution) 4-20
installing 4-18, 4-81
Catalyst 6503-E switches 1-12
Catalyst 6503 switches 1-7
Catalyst 6504-E switches 1-17
Catalyst 6506-E switches 1-29
Catalyst 6506 switches 1-23
Catalyst 6509-E switches 1-41
Catalyst 6509-NEB-A switches 1-54
Catalyst 6509-NEB switches 1-48
Catalyst 6509 switches 1-35
Catalyst 6509-V-E switches 1-60
Catalyst 6513-E switches 1-73
Catalyst 6513 switches 1-67
correcting B-38
description B-37
audience iii-xi
conventions iii-xii
organization iii-xi
related iii-xix
description B-17
modules supported on B-17
physical form (figure) B-19
product numbers and ITU channel numbers B-20
description B-18
modules supported on B-18
physical form (figure) B-23
product numbers and ITU channel numbers B-21
supervisor engine and switching modules E-5
Catalyst 6503-E switches 1-11
Catalyst 6503 switches 1-6
Catalyst 6504-E switches 1-16
Catalyst 6506-E switches 1-28
Catalyst 6506 switches 1-22
Catalyst 6509-E switches 1-40
Catalyst 6509-NEB-A switches 1-53
Catalyst 6509-NEB switches 1-47
Catalyst 6509 switches 1-34
Catalyst 6509-V-E switches 1-59
Catalyst 6513-E switches 1-72
Catalyst 6513 switches 1-66
guidelines 2-20
preventing 2-20
excessive link spans B-38
checking the installation 4-92
fan status LED 2-5, E-5
fan tray removal warning 4-84
installing 4-92
troubleshooting E-5
fan tray removal warning 4-84
Catalyst 6503-E switches 1-9
Catalyst 6503 switches 1-3
Catalyst 6504-E switches 1-14
Catalyst 6506-E switches 1-24
Catalyst 6506 switches 1-19
Catalyst 6509-E switches 1-37
Catalyst 6509-NEB-A switches 1-50
Catalyst 6509-NEB switches 1-43
Catalyst 6509 switches 1-31
Catalyst 6509-V-E switches 1-56
Catalyst 6513-E switches 1-69
Catalyst 6513 switches 1-62
ferrite bead A-60
Flash code, troubleshooting E-3
GBIC transceivers B-3 to B-6
attenuators B-5
cabling specifications (table) B-5
modules supported on B-4
optical GBICs physical form (figure) B-5
WS-G5483 copper GBICs physical form (figure) B-4
DMD occurrences B-37
guidelines, rack-mounting the switch 3-3
IEEE 802.3z B-37
patch cords B-37
shelf brackets 3-48
tools required 3-48
troubleshooting E-1
power and heat numbers D-3
transmission comparison (figure) B-38
figure B-30
LC optical connectors B-30
at startup E-3
fan assemblies E-5
modules E-5
power supplies E-4
transmission B-37
transmission comparison (figure) B-38
excessive limits B-38
LX/LH GBICs B-36
modem adapters B-35
fiber B-37
LEDs E-5
status LED E-2
troubleshooting E-5
cleaning B-39
description B-29
organization, document iii-xi
overfilled launch condition B-37
packing material C-1
configuration example B-36
differential mode delay B-37
figure B-37
installation B-37
LX/LH GBICs B-36
installing 4-78
removing 4-76
removing and installing 4-75
physical and enviromental specifications tables
1-GB SFP transceivers B-9
physical and environmental specifications tables
100-MB SFP transceivers B-3
GBIC transceivers B-6
X2 transceivers B-16
Catalyst 6503 1-7
Catalyst 6503-E 1-12
Catalyst 6504-E 1-17
Catalyst 6506-E switches 1-29
Catalyst 6506 switches 1-23
Catalyst 6509-E 1-41
Catalyst 6509-NEB-A switches 1-54
Catalyst 6509-NEB switches 1-48
Catalyst 6509 switches 1-35
Catalyst 6509-V-E switches 1-60
Catalyst 6513-E switches 1-73
Catalyst 6513 switches 1-67
mode 1 B-34
mode 2 B-35
using B-33
shut down sequence A-77
troubleshooting E-2
chassis D-2
fan trays D-2
IP phones D-3
modules D-15
supervisor engines D-4
power down sequence A-77
Catalyst 6503-E switches requirement 1-10
Catalyst 6503 switches requirement 1-5
description A-18
form factor (figure) A-5
overview A-5
removing and installing 4-75
branch circuit requirements 2-22
site preparation 2-22
UPS selection 2-22
AC power cord figures A-63
Catalyst 6503-E switches 1-11
Catalyst 6503 switches 1-5
Catalyst 6504-E switches 1-15
Catalyst 6506-E switches 1-27
Catalyst 6506 switches 1-21
Catalyst 6509-E switches 1-39
Catalyst 6509-NEB-A switches 1-52
Catalyst 6509-NEB switches 1-46
Catalyst 6509 switches 1-33
Catalyst 6509-V-E switches 1-58
Catalyst 6513-E switches 1-71
Catalyst 6513 switches 1-65
chassis compatibility matrix A-2
DC power cable leads color coding 2-23
mixing AC-input and DC-input in the same chassis A-2
See specific AC-input power supplies or DC-input power supplies
description B-17
modules supported on B-17
description B-18
modules supported on B-18
guidelines 3-3
installation restrictions 3-48
redundancy, power supplies A-73
Regulatory Compliance and Safety Information iii-xix
8700W power supply terminal block A-60
components (figure) A-60
ferrite bead A-60
operation A-61
overview A-60
relay controller box A-60
switch settings and operation A-61
removal and replacement procedures
AC-input PEM 4-75
AC-input power supplies 4-6, 4-9, 4-10
cable management system 3-31
DC-input power supplies 4-19
DC-input power supply 4-16, 4-79
repacking switches C-1
description B-25
figure B-25
pinout (table) B-26
pinout (table) (WS-X6624-FXS only) B-27
description B-24
figure B-24
figure B-33
identifying colors B-33
description B-28
figure B-28
selecting a UPS 2-22
service and support E-7
SFP transceivers B-7 to B-9
100-MB SFP transceivers B-1 to B-3
cabling specifications (table) B-2
description B-1
physical and environmental specifications table B-3
physical form (figure) B-2
1-GB SFP transceivers B-3 to B-9
cabling specifications (table) B-8
modules supported on B-4
physical and enviromental specifications table B-9
physical form, optical (figure) B-7
physical form copper (figure) B-7
installation 3-48
shock and vibration specifications
Catalyst 6503-E switches 1-12
Catalyst 6503 switches 1-6
Catalyst 6504-E switches 1-16
Catalyst 6506-E switches 1-28
Catalyst 6506 switches 1-22
Catalyst 6509-E switches 1-40
Catalyst 6509-NEB-A switches 1-53
Catalyst 6509-NEB switches 1-47
Catalyst 6509 switches 1-34
Catalyst 6509-V-E switches 1-59
Catalyst 6513 1-66
Catalyst 6513-E 1-72
terminal setup 3-62
checklist 2-24
airflow 2-5
altitude 2-14
corrosion 2-15
dust and contamination 2-15
EMI 2-15
humidity 2-14
power interruptions 2-16
shock and vibration 2-16
temperature 2-2
Catalyst 6503-E switches 1-11
Catalyst 6503 switches 1-6
Catalyst 6504-E switches 1-16
Catalyst 6506-E switches 1-28
Catalyst 6506 switches 1-22
Catalyst 6509 1-34
Catalyst 6509-E switches 1-40
Catalyst 6509-NEB-A switches 1-53
Catalyst 6509-NEB switches 1-47
Catalyst 6509-V-E switches 1-59
Catalyst 6513-E switches 1-72
Catalyst 6513 switches 1-66
brackets (figure) 3-51
installing 3-51
startup, troubleshooting E-2
alarms E-5
status LEDs E-2, E-3
checking LEDs E-3
troubleshooting E-3, E-5
uplink ports 3-63
See specific Catalyst switches
accessory kit 3-53
Catalyst 6503 connector location (figure) 3-54
Catalyst 6503-E connector location (figure) 3-54
Catalyst 6504-E connector location (figure) 3-55
Catalyst 6506 connector location (figure) 3-56
Catalyst 6506-E connector location (figure) 3-57
Catalyst 6509 connector location (figure) 3-56
Catalyst 6509-E connector location (figure) 3-57
Catalyst 6509-NEB-A connector location (figure) 3-58
Catalyst 6509-NEB connector location (figure) 3-56
Catalyst 6513 connector location (figure) 3-57
Catalyst 6513-E connector location (figure) 3-57
connecting 3-53
grounding lug 3-53
guidelines 2-17
tools required 3-53
tools, required for installation 3-48
10-GBASE-X XENPAKs B-10
1-GB transceivers B-3 to B-9
contacting customer service E-7
fan assemblies E-5
Flash code E-3
initial boot E-1
methodology E-2
modules E-5
power supplies E-4
startup E-2
supervisor engines E-5
connecting 3-63
specifications A-26, A-32
conventions iii-xiv
translations iii-xiv
warning definition iii-xiv
WDM transceivers B-17 to B-23
CWDM GBICs physical form (figure) B-19
description B-17
modules supported on B-17
wavelength table B-19
description B-18
modules supported on B-18
physical form (figure) B-21
product numbers and color codes B-21
description B-17
modules supported on B-17
physical form (figure) B-19
product numbers and ITU channel numbers B-20
description B-18
modules supported on B-18
physical form (figure) B-23
product numbers and ITU channel numbers B-21
description B-17
modules supported on B-17
description B-18
modules supported on B-18
Catalyst 6503-E switches 1-12
Catalyst 6503 switches 1-7
Catalyst 6504-E switches 1-17
Catalyst 6506-E switches 1-29
Catalyst 6506 switches 1-23
Catalyst 6509-E switches 1-41
Catalyst 6509-NEB-A switches 1-54
Catalyst 6509-NEB switches 1-48
Catalyst 6509 switches 1-35
Catalyst 6509-V-E switches 1-60
Catalyst 6513-E switches 1-73
Catalyst 6513 switches 1-67
X2 transceivers B-13 to B-16
cabling specifications B-14
form factor (figure) B-13
modules supported on B-10
optical transmit and receive specifications B-14
serial number locator (figure) B-16
support on WS-X6708-10G-xx modules B-15
XENPAK transceivers B-10 to B-12
modules supported on B-10
physical form (figure) B-11
polish face types supported B-10
specifications and cabling distances table B-11
Index
AC power cords A-13
form factor (figure) A-10
overview A-10
specifications A-11
100-MB SFP transceivers B-1 to B-3
10-GB transceivers B-10 to B-16
X2 transceivers B-10 to B-16
modules supported on B-10
optical transmit and receive specifications B-14
physical and environmental specifications table B-16
XENPAK transceivers B-10 to B-16
modules supported on B-10
physical form (figure) B-11
polish face types supported B-10
specifications and cabling distances table B-11
1300 W AC-input power supplies
AC power cords A-17
form factor (figure) A-14
overview A-13
specifications A-15
1300 W DC-input power supplies
form factor (figure) A-14
overview A-13
specifications A-16
AC power cords A-21
form factor (figure) A-19
overview A-18
power entry module A-18
removing and installing 4-3, 4-9
specifications A-19
See either GBIC transceivers or SFP transceivers
2500 W AC-input power supplies
AC power cords A-28
form factor (figure) A-23
overview A-23
specifications A-24
2500 W DC-input power supplies
form factor (figure) A-24
overview A-23
specifications A-25
2700 W AC-input power supplies
AC power cords A-35
form factor (figure) A-29
overview A-29
removing and installing 4-6
specifications A-31
2700 W DC-input power supplies
form factor (figure) A-30
overview A-29
specifications A-32
AC power cords A-40
form factor (figure) A-36
overview A-36
specifications A-37
4000 W AC-input power supplies
AC power cords A-46
form factor (figure) A-41
overview A-41
specifications A-42
4000 W DC-input power supplies
form factor (figure) A-42
installing 4-42
overview A-41
specifications A-44
6000 W AC-input power supplies
AC power cords A-53
chassis supported A-46
form factor (figure) A-47
overview A-46
specifications A-48
6000 W DC-input power supplies
specifications A-51
8700 W AC-input power supplies
AC power cords A-62
chassis supported A-54
form factor (figure) A-55
NEBS system ground restrictions A-55
overview A-54
relay controller box switch A-60
remote power cycling feature A-60
remote power cycling terminal block A-60
specifications A-55
AC power cords A-9
form factor (figure) A-5
overview A-5
removing and installing 4-3, 4-9
specifications A-6
overview A-5
removing and installing 4-3, 4-9, 4-15
specifications A-8
console port cable B-32
contents 3-5, B-32
repacking C-1
installing 4-78
removing 4-76
1000 W power supply A-13
1300 W power supply A-17
1400 W power supply A-21
2500 W power supply A-28
2700 W power supply A-35
3000 W power supply A-40
4000 W power supply A-46
6000 W power supply A-53
8700 W power supply A-62
950 W power supply A-9
illustrations A-63 to A-73
handling (figure) 4-12
heat dissipation D-2, D-3, D-4, D-15
installing 4-5, 4-13
LEDs E-4
redundancy A-73
removing 4-4
removing and replacing 4-9
source circuit requirements 2-22
troubleshooting E-4
weight (caution) 4-10
Catalyst 6503-E switches 1-12
Catalyst 6503 switches 1-6
Catalyst 6504-E switches 1-17
Catalyst 6506-E switches 1-28
Catalyst 6506 switches 1-22
Catalyst 6509-E switches 1-40
Catalyst 6509-NEB-A switches 1-53
Catalyst 6509-NEB switches 1-47
Catalyst 6509 switches 1-34
Catalyst 6509-V-E switches 1-59
Catalyst 6513-E switches 1-72
Catalyst 6513 switches 1-66
console port mode 2 B-35
DB-25 B-34
DB-9 B-34
modem B-35
installing 4-93
part numbers 4-93
recommended change intervals 4-98
Catalyst 6503 (figure) 2-6
Catalyst 6503-E (figure) 2-6
Catalyst 6503-E switches 1-12
Catalyst 6503 switches 1-7
Catalyst 6504-E (figure) 2-7
Catalyst 6504-E switches 1-17
Catalyst 6506 (figure) 2-7
Catalyst 6506-E (figure) 2-8
Catalyst 6506-E switches 1-29
Catalyst 6506 switches 1-23
Catalyst 6509 (figure) 2-9
Catalyst 6509-E (figure) 2-10
Catalyst 6509-E switches 1-41
Catalyst 6509-NEB (figure) 2-11
Catalyst 6509-NEB-A (figure) 2-12
Catalyst 6509-NEB-A switches 1-54
Catalyst 6509-NEB switches 1-48
Catalyst 6509 switches 1-35
Catalyst 6509-V-E switches 1-60
Catalyst 6513 (figure) 2-13
Catalyst 6513-E (figure) 2-14
Catalyst 6513-E switches 1-73
Catalyst 6513 switches 1-67
chassis requirements (table) 2-6
description 2-5
major E-5
minor E-5
attenuators, using with 1000BASE-ZX GBIC B-5
audience, document iii-xi
See crossbar brackets, shelf brackets, stabilizer brackets
branch circuit requirements 2-22
installing on Catalyst 6506-E switches 3-17
installing on Catalyst 6506 switches 3-17
installing on Catalyst 6509-E switches 3-21
installing on Catalyst 6509-NEB switches 3-27
installing on Catalyst 6509 switches 3-21
installing on Catalyst 6513 switches 3-45
cable management system (Catalyst 6509-NEB-A switches)
installing 3-31
replacing the cable guide 3-33
console ports B-32
requirements and guidelines 2-24
acoustic noise 1-12
airflow 1-12
airflow (figure) 2-6
chassis, dimensions 1-12
environmental specifications 1-11
fan trays 1-10
features table 1-9
form factor (figure) 1-8
physical characteristics 1-12
description 1-10
removing and installing 4-75
description 1-11
removing and installing procedures 4-3
shock and vibration specifications 1-12
specifications 1-11
supervisor engines 1-9
acoustic noise 1-6
airflow 1-7
airflow (figure) 2-6
chassis, dimensions 1-7
environmental specifications 1-6
fan trays 1-4
features table 1-3
form factor (figure) 1-2
physical characteristics 1-7
description 1-5
removing and installing 4-75
description 1-5
installation procedure, AC-input 4-5
installation procedure, DC-input 4-18
removal procedure, AC-input 4-3
removal procedure, DC-input 4-16
shock and vibration specifications 1-6
specifications 1-6
supervisor engines 1-3
acoustic noise 1-17
airflow 1-17
airflow (figure) 2-7
chassis, dimensions 1-17
environmental specifications 1-16
fan trays 1-15
features table 1-14
physical characteristics 1-17
description 1-15
shock and vibration specifications 1-16
specifications 1-16
supervisor engines 1-14
acoustic noise 1-28
airflow 1-29
airflow (figure) 2-8
environmental specifications 1-28
fan trays 1-26
features table 1-24
installing L brackets and cable guides 3-17
physical characteristics 1-29
power supplies 1-27
shock and vibration specifications 1-28
specifications 1-28
supervisor engines 1-25
acoustic noise 1-22
airflow 1-23
airflow (figure) 2-7
environmental specifications 1-22
fan trays 1-20
features table 1-19
form factor (figure) 1-18, 1-24
installing L brackets and cable guides 3-17
physical characteristics 1-23
power supplies 1-21
rack-mounting 3-48
repacking the switch C-1
shock and vibration specifications 1-22
specifications 1-22
supervisor engines 1-19
acoustic noise 1-40
airflow 1-41
airflow (figure) 2-10
environmental specifications 1-40
fan trays 1-38
features table 1-37
form factor (figure) 1-36
installing L brackets and cable guides 3-21
physical characteristics 1-41
power supplies 1-39
shock and vibration specifications 1-40
specifications 1-40
supervisor engines 1-37
acoustic noise 1-53
airflow 1-54
airflow (figure) 2-12
cable management system 3-31
dimensions, chassis 1-54
environmental specifications 1-53
fan trays 1-51
features table 1-50
form factor (figure) 1-49
installing the stabilizer kit 3-50
optional air filter 4-93
physical characteristics 1-54
description 1-52
installation procedure, DC-input 4-15
shock and vibration specifications 1-53
specifications 1-53
supervisor engines 1-50
weight 1-54
acoustic noise 1-47
airflow 1-48
airflow (figure) 2-11
environmental specifications 1-47
fan trays 1-45
features table 1-43
form factor (figure) 1-42
installing L brackets and cable guides 3-27
installing the stabilizer kit 3-50
physical characteristics 1-48
power supplies 1-46
shock and vibration specifications 1-47
specifications 1-47
supervisor engines 1-43
acoustic noise 1-34
airflow 1-35
airflow (figure) 2-9
environmental specifications 1-34
fan trays 1-32
features table 1-31
form factor (figure) 1-30
installing L brackets and cable guides 3-21
physical characteristics 1-35
power supplies 1-33
repacking the switch C-1
shock and vibration specifications 1-34
specifications 1-34
supervisor engines 1-31
acoustic noise 1-59
airflow 1-60
dimensions, chassis 1-60
environmental specifications 1-59
fan trays 1-57
features table 1-56
form factor (figure) 1-55
physical characteristics 1-60
description 1-58
shock and vibration specifications 1-59
specifications 1-59
supervisor engines 1-56
weight 1-60
acoustic noise 1-72
airflow 1-73
airflow (figure) 2-14
environmental specifications 1-72
fan trays 1-70
features table 1-69
form factor (figure) 1-68
installing the stabilizer it 3-50
physical characteristics 1-73
power supplies 1-71
shock and vibration specifications 1-72
specifications 1-72
supervisor engines 1-69
acoustic noise 1-66
airflow 1-67
airflow (figure) 2-13
environmental specifications 1-66
fan trays 1-64
features table 1-62
form factor (figure) 1-61
installing cable guides 3-45
installing the stabilizer kit 3-50
physical characteristics 1-67
power supplies 1-65
shock and vibration specifications 1-66
specifications 1-66
supervisor engines 1-62
category 5e static electricity caution 2-16, 2-18, 2-24, B-24, B-26
category 6a static electricity caution 2-16, 2-18, 2-24, B-24
category 6 static electricity caution 2-16, 2-18, 2-24, B-24, B-26
chassis airflow 2-5
checklist, site preparation 2-24
guidelines B-39
console ports B-32
modems 3-62
power sources 4-13
system ground 3-53
terminals 3-62
uplink ports 3-63
fiber optic B-39
LC optical B-30
MT-RJ B-29
SC optical B-28
See specific types of connectors
DB-25 adapters B-34
DB-9 adapter B-34
mode 1 pinout (table) B-34
port mode switches B-33
mode 1 B-34
mode 2 B-35
conventions, documentation iii-xii
installing 3-48
customer service E-7
description B-17
modules supported on B-17
physical form (figure) B-19
wavelength table B-19
description B-18
modules supported on B-18
physical form (figure) B-21
product numbers and color codes B-21
console port mode 1 B-34
connecting system ground 3-53
figure 4-20, 4-21
installing 4-24
LEDs E-4
redundancy A-73
removing 4-16, 4-19, 4-79
removing and replacing 4-9
troubleshooting E-4
weight (caution) 4-20
installing 4-18, 4-81
Catalyst 6503-E switches 1-12
Catalyst 6503 switches 1-7
Catalyst 6504-E switches 1-17
Catalyst 6506-E switches 1-29
Catalyst 6506 switches 1-23
Catalyst 6509-E switches 1-41
Catalyst 6509-NEB-A switches 1-54
Catalyst 6509-NEB switches 1-48
Catalyst 6509 switches 1-35
Catalyst 6509-V-E switches 1-60
Catalyst 6513-E switches 1-73
Catalyst 6513 switches 1-67
correcting B-38
description B-37
audience iii-xi
conventions iii-xii
organization iii-xi
related iii-xix
description B-17
modules supported on B-17
physical form (figure) B-19
product numbers and ITU channel numbers B-20
description B-18
modules supported on B-18
physical form (figure) B-23
product numbers and ITU channel numbers B-21
supervisor engine and switching modules E-5
Catalyst 6503-E switches 1-11
Catalyst 6503 switches 1-6
Catalyst 6504-E switches 1-16
Catalyst 6506-E switches 1-28
Catalyst 6506 switches 1-22
Catalyst 6509-E switches 1-40
Catalyst 6509-NEB-A switches 1-53
Catalyst 6509-NEB switches 1-47
Catalyst 6509 switches 1-34
Catalyst 6509-V-E switches 1-59
Catalyst 6513-E switches 1-72
Catalyst 6513 switches 1-66
guidelines 2-20
preventing 2-20
excessive link spans B-38
checking the installation 4-92
fan status LED 2-5, E-5
fan tray removal warning 4-84
installing 4-92
troubleshooting E-5
fan tray removal warning 4-84
Catalyst 6503-E switches 1-9
Catalyst 6503 switches 1-3
Catalyst 6504-E switches 1-14
Catalyst 6506-E switches 1-24
Catalyst 6506 switches 1-19
Catalyst 6509-E switches 1-37
Catalyst 6509-NEB-A switches 1-50
Catalyst 6509-NEB switches 1-43
Catalyst 6509 switches 1-31
Catalyst 6509-V-E switches 1-56
Catalyst 6513-E switches 1-69
Catalyst 6513 switches 1-62
ferrite bead A-60
Flash code, troubleshooting E-3
GBIC transceivers B-3 to B-6
attenuators B-5
cabling specifications (table) B-5
modules supported on B-4
optical GBICs physical form (figure) B-5
WS-G5483 copper GBICs physical form (figure) B-4
DMD occurrences B-37
guidelines, rack-mounting the switch 3-3
IEEE 802.3z B-37
patch cords B-37
shelf brackets 3-48
tools required 3-48
troubleshooting E-1
power and heat numbers D-3
transmission comparison (figure) B-38
figure B-30
LC optical connectors B-30
at startup E-3
fan assemblies E-5
modules E-5
power supplies E-4
transmission B-37
transmission comparison (figure) B-38
excessive limits B-38
LX/LH GBICs B-36
modem adapters B-35
fiber B-37
LEDs E-5
status LED E-2
troubleshooting E-5
cleaning B-39
description B-29
organization, document iii-xi
overfilled launch condition B-37
packing material C-1
configuration example B-36
differential mode delay B-37
figure B-37
installation B-37
LX/LH GBICs B-36
installing 4-78
removing 4-76
removing and installing 4-75
physical and enviromental specifications tables
1-GB SFP transceivers B-9
physical and environmental specifications tables
100-MB SFP transceivers B-3
GBIC transceivers B-6
X2 transceivers B-16
Catalyst 6503 1-7
Catalyst 6503-E 1-12
Catalyst 6504-E 1-17
Catalyst 6506-E switches 1-29
Catalyst 6506 switches 1-23
Catalyst 6509-E 1-41
Catalyst 6509-NEB-A switches 1-54
Catalyst 6509-NEB switches 1-48
Catalyst 6509 switches 1-35
Catalyst 6509-V-E switches 1-60
Catalyst 6513-E switches 1-73
Catalyst 6513 switches 1-67
mode 1 B-34
mode 2 B-35
using B-33
shut down sequence A-77
troubleshooting E-2
chassis D-2
fan trays D-2
IP phones D-3
modules D-15
supervisor engines D-4
power down sequence A-77
Catalyst 6503-E switches requirement 1-10
Catalyst 6503 switches requirement 1-5
description A-18
form factor (figure) A-5
overview A-5
removing and installing 4-75
branch circuit requirements 2-22
site preparation 2-22
UPS selection 2-22
AC power cord figures A-63
Catalyst 6503-E switches 1-11
Catalyst 6503 switches 1-5
Catalyst 6504-E switches 1-15
Catalyst 6506-E switches 1-27
Catalyst 6506 switches 1-21
Catalyst 6509-E switches 1-39
Catalyst 6509-NEB-A switches 1-52
Catalyst 6509-NEB switches 1-46
Catalyst 6509 switches 1-33
Catalyst 6509-V-E switches 1-58
Catalyst 6513-E switches 1-71
Catalyst 6513 switches 1-65
chassis compatibility matrix A-2
DC power cable leads color coding 2-23
mixing AC-input and DC-input in the same chassis A-2
See specific AC-input power supplies or DC-input power supplies
description B-17
modules supported on B-17
description B-18
modules supported on B-18
guidelines 3-3
installation restrictions 3-48
redundancy, power supplies A-73
Regulatory Compliance and Safety Information iii-xix
8700W power supply terminal block A-60
components (figure) A-60
ferrite bead A-60
operation A-61
overview A-60
relay controller box A-60
switch settings and operation A-61
removal and replacement procedures
AC-input PEM 4-75
AC-input power supplies 4-6, 4-9, 4-10
cable management system 3-31
DC-input power supplies 4-19
DC-input power supply 4-16, 4-79
repacking switches C-1
description B-25
figure B-25
pinout (table) B-26
pinout (table) (WS-X6624-FXS only) B-27
description B-24
figure B-24
figure B-33
identifying colors B-33
description B-28
figure B-28
selecting a UPS 2-22
service and support E-7
SFP transceivers B-7 to B-9
100-MB SFP transceivers B-1 to B-3
cabling specifications (table) B-2
description B-1
physical and environmental specifications table B-3
physical form (figure) B-2
1-GB SFP transceivers B-3 to B-9
cabling specifications (table) B-8
modules supported on B-4
physical and enviromental specifications table B-9
physical form, optical (figure) B-7
physical form copper (figure) B-7
installation 3-48
shock and vibration specifications
Catalyst 6503-E switches 1-12
Catalyst 6503 switches 1-6
Catalyst 6504-E switches 1-16
Catalyst 6506-E switches 1-28
Catalyst 6506 switches 1-22
Catalyst 6509-E switches 1-40
Catalyst 6509-NEB-A switches 1-53
Catalyst 6509-NEB switches 1-47
Catalyst 6509 switches 1-34
Catalyst 6509-V-E switches 1-59
Catalyst 6513 1-66
Catalyst 6513-E 1-72
terminal setup 3-62
checklist 2-24
airflow 2-5
altitude 2-14
corrosion 2-15
dust and contamination 2-15
EMI 2-15
humidity 2-14
power interruptions 2-16
shock and vibration 2-16
temperature 2-2
Catalyst 6503-E switches 1-11
Catalyst 6503 switches 1-6
Catalyst 6504-E switches 1-16
Catalyst 6506-E switches 1-28
Catalyst 6506 switches 1-22
Catalyst 6509 1-34
Catalyst 6509-E switches 1-40
Catalyst 6509-NEB-A switches 1-53
Catalyst 6509-NEB switches 1-47
Catalyst 6509-V-E switches 1-59
Catalyst 6513-E switches 1-72
Catalyst 6513 switches 1-66
brackets (figure) 3-51
installing 3-51
startup, troubleshooting E-2
alarms E-5
status LEDs E-2, E-3
checking LEDs E-3
troubleshooting E-3, E-5
uplink ports 3-63
See specific Catalyst switches
accessory kit 3-53
Catalyst 6503 connector location (figure) 3-54
Catalyst 6503-E connector location (figure) 3-54
Catalyst 6504-E connector location (figure) 3-55
Catalyst 6506 connector location (figure) 3-56
Catalyst 6506-E connector location (figure) 3-57
Catalyst 6509 connector location (figure) 3-56
Catalyst 6509-E connector location (figure) 3-57
Catalyst 6509-NEB-A connector location (figure) 3-58
Catalyst 6509-NEB connector location (figure) 3-56
Catalyst 6513 connector location (figure) 3-57
Catalyst 6513-E connector location (figure) 3-57
connecting 3-53
grounding lug 3-53
guidelines 2-17
tools required 3-53
tools, required for installation 3-48
10-GBASE-X XENPAKs B-10
1-GB transceivers B-3 to B-9
contacting customer service E-7
fan assemblies E-5
Flash code E-3
initial boot E-1
methodology E-2
modules E-5
power supplies E-4
startup E-2
supervisor engines E-5
connecting 3-63
specifications A-26, A-32
conventions iii-xiv
translations iii-xiv
warning definition iii-xiv
WDM transceivers B-17 to B-23
CWDM GBICs physical form (figure) B-19
description B-17
modules supported on B-17
wavelength table B-19
description B-18
modules supported on B-18
physical form (figure) B-21
product numbers and color codes B-21
description B-17
modules supported on B-17
physical form (figure) B-19
product numbers and ITU channel numbers B-20
description B-18
modules supported on B-18
physical form (figure) B-23
product numbers and ITU channel numbers B-21
description B-17
modules supported on B-17
description B-18
modules supported on B-18
Catalyst 6503-E switches 1-12
Catalyst 6503 switches 1-7
Catalyst 6504-E switches 1-17
Catalyst 6506-E switches 1-29
Catalyst 6506 switches 1-23
Catalyst 6509-E switches 1-41
Catalyst 6509-NEB-A switches 1-54
Catalyst 6509-NEB switches 1-48
Catalyst 6509 switches 1-35
Catalyst 6509-V-E switches 1-60
Catalyst 6513-E switches 1-73
Catalyst 6513 switches 1-67
X2 transceivers B-13 to B-16
cabling specifications B-14
form factor (figure) B-13
modules supported on B-10
optical transmit and receive specifications B-14
serial number locator (figure) B-16
support on WS-X6708-10G-xx modules B-15
XENPAK transceivers B-10 to B-12
modules supported on B-10
physical form (figure) B-11
polish face types supported B-10
specifications and cabling distances table B-11