Table Of Contents

show snmp access

show snmp access-list

show snmp buffer

show snmp community

show snmp context

show snmp counters

show snmp engineid

show snmp group

show snmp ifalias

show snmp inform

show snmp notification mapping

show snmp notify

show snmp rmonmemory

show snmp targetaddr

show snmp targetparams

show snmp user

show snmp view

show span

show spantree

show spantree backbonefast

show spantree blockedports

show spantree bpdu-filter

show spantree bpdu-guard

show spantree bpdu-skewing

show spantree conflicts

show spantree defaultcostmode

show spantree guard

show spantree mapping

show spantree mistp-instance

show spantree mst

show spantree mst config

show spantree portfast

show spantree portinstancecost

show spantree portvlancost

show spantree statistics

show spantree summary

show spantree uplinkfast

show ssh

show startup-config

show summertime

show system

show system health

show system highavailability

show system info-log

show system profile

show system sanity

show system supervisor-update

show system switchmode

show tacacs

show tech-support

22

show snmp access

To display SNMP access information, use the show snmp access command.

show snmp access [volatile | nonvolatile | read-only]

show snmp access [-hex] groupname security-model {v1 | v2c}

show snmp access [-hex] groupname security-model v3 {noauthentication | authentication | privacy} [context [-hex] contextname]

Syntax Description

volatile	(Optional) Displays information for volatile storage types.
nonvolatile	(Optional) Displays information for nonvolatile storage types.
read-only	(Optional) Displays information for read-only storage types.
-hex	(Optional) Displays groupname, username, and contextname as a hexadecimal character.
groupname	Name of the SNMP group or collection of users who have a common access policy.
security-model v1 | v2c | v3	Specifies security model v1, v2c, or v3.
noauthentication	Displays information for security models not set to use authentication protocol.
authentication	Displays information for authentication protocol.
privacy	Displays information regarding messages sent on behalf of the user that are protected from disclosure.
context contextname	(Optional) Specifies the name of a context string.

Defaults

The default storage type is volatile.

Command Types

Switch command.

Command Modes

Normal.

Usage Guidelines

If you use special characters for the groupname (nonprintable delimiters for these parameters), you must use a hexadecimal keyword, which is one or two hexadecimal digits separated by a colon (:); for example, 00:ab:34.

If you do not enter a context name, a NULL context string is used.

There are three versions of SNMP:

•Version 1 (SNMPv1)—This is the initial implementation of SNMP. Refer to RFC 1157 for a full description of functionality.

•Version 2 (SNMPv2c)—The second release of SNMP, described in RFC 1902, has additions and enhancements to data types, counter size, and protocol operations.

•Version 3 (SNMPv3)—This is the most recent version of SNMP and is fully described in RFC 2571, RFC 2572, RFC 2573, RFC 2574, and RFC 2575. SNMPv3 has significant enhancements to administration and security.

The SNMP functionality on the Catalyst enterprise LAN switches for SNMP v1 and SNMP v2c remains intact; however, the functionality has greatly expanded for SNMPv3. Refer to the "Configuring SNMP" chapter of the Catalyst 6500 Series Switch Software Configuration Guide for more information on SNMPv3.

The read-only keyword is supported for security model v3 only.

Examples

This example shows how to display all SNMP access information:

Console> (enable) show snmp access 

Group Name:defaultROgroup

Context:

Security Model:v1

Security Level:noauthentication

Context Match:vlan-1

Read View:defaultAdminView

Write View:

Notify View:defaultAdminView

Storage Type:read-only

Row Status:active

Group Name:defaultROgroup

Context:

Security Model:v2c

Secuirty Level:noauthentication

Context Match:vlan-55

Read View:defaultAdminView

Write View:

Notify View:defaultAdminView

Storage Type:read-only

Row Status:active

Related Commands

clear snmp access
set snmp access
show snmp context

show snmp access-list

To display SNMP access list numbers and corresponding IP addresses and IP masks, use the show snmp access-list command.

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Types

Switch command.

Command Modes

Normal.

Examples

This example shows how to display SNMP access list numbers and corresponding IP addresses and IP masks:

Console> show snmp access-list 

Access-Number   IP-Addresses/IP-Mask 

-------------   ------------------------- 

1               172.20.60.100/255.0.0.0 

                1.1.1.1/- 

2               172.20.60.7/- 

                2.2.2.2/- 

3               2.2.2.2/155.0.0.0 

4               1.1.1.1/2.1.2.4 

                2.2.2.2/- 

                2.2.2.5/- 

Related Commands

clear snmp access-list
set snmp access-list

show snmp buffer

To display the number of SNMP packets that can be saved in the SNMP UDP socket receive buffer, use the show snmp buffer command.

show snmp buffer

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Types

Switch command

Command Modes

Normal

Examples

This example shows how to display the number of SNMP socket packets that can be saved in the SNMP UDP socket receive buffer:

Console> show snmp buffer 

SNMP socket receive buffer:40 packets 

Console> 

Related Commands

set snmp buffer

show snmp community

To display SNMP context information, use the show snmp community command.

show snmp community

show snmp community [read-only | volatile | nonvolatile]

show snmp community index [-hex] {index name}

Syntax Description

read-only	(Optional) Specifies that the community is defined as read only.
volatile	(Optional) Specifies the community type is defined as temporary memory and the content is deleted if the device is turned off.
nonvolatile	(Optional) Specifies the community type is defined as persistent memory and the content remains after the device is turned off and on again.
index	Specifies the index of community names.
-hex	(Optional) Displays index name as a hexadecimal character.
index name	Name of the community index.

Defaults

This command has no default settings.

Command Types

Switch command.

Command Modes

Normal and privileged.

Usage Guidelines

If you enter the show snmp community command in privileged mode, the output display includes information for the read-only, the read-write, and the read-write-all community strings. If you enter the show snmp community command in normal mode, the display includes only information for the read-only community string.

Examples

This example shows the output when you enter the show snmp community command for the read-only community string in normal mode:

Console> show snmp community

Community Index: sysCommunityRo.0

Community Name: public

Security Name: public

Context Name:

Transport Tag:

Storage Type: read-only

Row Status: active

Console>

This example shows the display output when you enter the show snmp community command for the read-only, the read-write, and the read-write-all community strings in privileged mode:

Console> (enable) show snmp community

Community Index: sysCommunityRo.0

Community Name: public

Security Name: public

Context Name:

Transport Tag:

Storage Type: read-only

Row Status: active

Community Index: sysCommunityRw.0

Community Name: private

Security Name: private

Context Name:

Transport Tag:

Storage Type: read-only

Row Status: active

Community Index: sysCommunityRwa.0

Community Name: secret

Security Name: secret

Context Name:

Transport Tag:

Storage Type: read-only

Row Status: active

Console> (enable) 

Related Commands

clear snmp community
set snmp community

show snmp context

To display SNMP context information, use the show snmp context command.

show snmp context

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Types

Switch command.

Command Modes

Normal.

Examples

This example shows how to display SNMP context information:

Console> (enable) show snmp context 

Index Context

----- --------

    0 

    1 vlan-1

    2 vlan-55

    3 vlan-1002

    4 vlan-1003

    5 vlan-1004

    6 vlan-1005

Console> (enable) 

Related Commands

clear snmp access
set snmp access
show snmp access

show snmp counters

To display SNMP counter information, use the show snmp counters command.

show snmp counters [v3 | {{mod/port} {dot1d | dot3 | hcrmon | ifmib | rmon}}]

Syntax Description

v3	(Optional) Specifies SNMPv3 counters.
mod/port	(Optional) Module number and port number.
dot1d	Specifies dot1d counters.
dot3	Specifies dot3 counters.
hcrmon	Specifies HCRMON counters.
ifmib	Specifies if-MIB counters.
rmon	Specifies RMON counters.

Defaults

This command has no default settings.

Command Types

Switch command.

Command Modes

Normal

Usage Guidelines

There are three versions of SNMP:

•Version 1 (SNMPv1)—This is the initial implementation of SNMP. Refer to RFC 1157 for a full description of functionality.

•Version 2 (SNMPv2c)—The second release of SNMP, described in RFC 1902, has additions and enhancements to data types, counter size, and protocol operations.

•Version 3 (SNMPv3)—This is the most recent version of SNMP and is fully described in RFC 2571, RFC 2572, RFC 2573, RFC 2574, and RFC 2575. SNMPv3 has significant enhancements to administration and security.

The SNMP functionality on the Catalyst enterprise LAN switches for SNMP v1 and SNMP v2c remains intact; however, the functionality has greatly expanded for SNMPv3. Refer to the "Configuring SNMP" chapter of the Catalyst 6500 Series Switch Software Configuration Guide for more information on SNMPv3.

Examples

This example shows how to display all SNMP counters:

Console> show snmp counters

mib2 SNMP group counters:

snmpInPkts                 = 13993     

snmpOutPkts                = 13960     

snmpInBadVersions          = 0         

snmpInBadCommunityNames    = 33        

snmpInBadCommunityUses     = 0         

snmpInASNParseErrs         = 0         

snmpInTooBigs              = 0         

snmpInNoSuchNames          = 0         

snmpInBadValues            = 0         

snmpInReadOnlys            = 0         

snmpInGenErrs              = 0         

snmpInTotalReqVars         = 61747     

snmpInTotalSetVars         = 0         

snmpInGetRequests          = 623       

snmpInGetNexts             = 13337     

snmpInSetRequests          = 0         

snmpInGetResponses         = 0         

snmpInTraps                = 0         

snmpOutTooBigs             = 0         

snmpOutNoSuchNames         = 230       

snmpOutBadValues           = 0         

snmpOutGenErrs             = 0         

snmpOutGetRequests         = 0         

snmpOutGetNexts            = 0         

snmpOutSetRequests         = 0         

snmpOutGetResponses        = 13960     

snmpOutTraps               = 0         

Console> 

Table 2-89 describes the fields in the show snmp counters command output.

Table 2-89 show snmp counters Command Output Fields 

Field	Description
snmpInPkts	Number of messages delivered to the SNMP entity from the transport service.
snmpOutPkts	Number of SNMP messages passed from the SNMP protocol entity to the transport service.
snmpInBadVersions	Number of SNMP messages delivered to the SNMP entity for an unsupported SNMP version.
snmpInBadCommunityNames	Number of SNMP messages delivered to the SNMP entity that used an SNMP community name not known to said entity.
snmpInBadCommunityUses	Number of SNMP messages delivered to the SNMP entity that represented an SNMP operation not allowed by the SNMP community named in the message.
snmpInASNParseErrs	Number of ASN.1 or BER errors encountered by the SNMP entity when decoding received SNMP messages.
snmpInTooBigs	Number of SNMP PDUs delivered to the SNMP protocol entity with the value of the error-status field as "tooBig."
snmpInNoSuchNames	Number of SNMP PDUs delivered to the SNMP protocol entity with the value of the error-status field as "noSuchName."
snmpInBadValues	Number of SNMP PDUs delivered to the SNMP protocol entity with the value of the error-status field as "badValue."
snmpInReadOnlys1	Number of valid SNMP PDUs delivered to the SNMP protocol entity with the value of the error-status field as "readOnly."
snmpInGenErrs	Number of SNMP PDUs delivered to the SNMP protocol entity with the value of the error-status field as "genErr."
snmpInTotalReqVars	Number of MIB objects retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
snmpInTotalSetVars	Number of MIB objects altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.
snmpInGetRequests	Number of SNMP Get-Request PDUs accepted and processed by the SNMP protocol entity.
snmpInPkts	Number of messages delivered to the SNMP entity from the transport service.
snmpOutPkts	Number of SNMP messages passed from the SNMP protocol entity to the transport service.
snmpInBadVersions	Number of SNMP messages delivered to the SNMP entity for an unsupported SNMP version.
snmpInBadCommunityNames	Number of SNMP messages delivered to the SNMP entity that used an SNMP community name not known to said entity.
snmpInBadCommunityUses	Number of SNMP messages delivered to the SNMP entity that represented an SNMP operation not allowed by the SNMP community named in the message.
snmpInASNParseErrs	Number of ASN.1 or BER errors encountered by the SNMP entity when decoding received SNMP messages.
snmpInTooBigs	Number of SNMP PDUs delivered to the SNMP protocol entity with the value of the error-status field as "tooBig."
snmpInNoSuchNames	Number of SNMP PDUs delivered to the SNMP protocol entity with the value of the error-status field as "noSuchName."
snmpInBadValues	Number of SNMP PDUs delivered to the SNMP protocol entity with the value of the error-status field as "badValue."
snmpInGenErrs	Number of SNMP PDUs delivered to the SNMP protocol entity with the value of the error-status field as "genErr."
snmpInTotalReqVars	Number of MIB objects retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
snmpInTotalSetVars	Number of MIB objects altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.
snmpInGetRequests	Number of SNMP Get-Request PDUs accepted and processed by the SNMP protocol entity.
snmpInGetNexts	Number of SNMP Get-Next PDUs accepted and processed by the SNMP protocol entity.
snmpInSetRequests	Number of SNMP Set-Request PDUs accepted and processed by the SNMP protocol entity.
snmpInGetResponses	Number of SNMP Get-Response PDUs accepted and processed by the SNMP protocol entity.
snmpInTraps	Number of SNMP Trap PDUs accepted and processed by the SNMP protocol entity.
snmpOutTooBigs	Number of SNMP PDUs generated by the SNMP protocol entity with the value of the error-status field as "tooBig."
snmpOutNoSuchNames	Number of SNMP PDUs generated by the SNMP protocol entity with the value of the error-status as "noSuchName."
snmpOutBadValues	Number of SNMP PDUs generated by the SNMP protocol entity with the value of the error-status field as "badValue."
snmpOutGenErrs	Number of SNMP PDUs generated by the SNMP protocol entity with the value of the error-status field as "genErr."
snmpOutGetRequests	Number of SNMP Get-Request PDUs generated by the SNMP protocol entity.
snmpOutGetNexts	Number of SNMP Get-Next PDUs generated by the SNMP protocol entity.
snmpOutSetRequests	Number of SNMP Set-Request PDUs generated by the SNMP protocol entity.
snmpOutGetResponses	Number of SNMP Get-Response PDUs generated by the SNMP protocol entity.
snmpOutTraps	Number of SNMP Trap PDUs generated by the SNMP protocol entity.

1 It is a protocol error to generate an SNMP PDU that contains the value "readOnly" in the error-status field. This object is provided as a means of detecting incorrect implementations of the SNMP. 1 This example shows how to display the SNMPv3 counters: 1 Console> show snmp counters v3 1 snmpv3 MPD statistics: 1 snmpUnknownSecurityModels = 0 1 snmpInvalidMsgs = 0 1 snmpUnknownPDUHandlers = 0 1 snmpv3 TARGET statistics: 1 snmpUnavailableContexts = 0 1 snmpUnknownContexts = 0 1 snmpv3 USM statistics: 1 usmStatsUnsupportedSecLevels = 0 1 usmStatsNotInTimeWindows = 0 1 usmStatsUnknownUserNames = 0 1 usmStatsUnknownEngineIDs = 0 1 usmStatsWrongDigests = 0 1 usmStatsDecryptionErrors = 0 1 Console>

show snmp engineid

To display the SNMP local engine ID, use the show snmp engineid command.

show snmp engineid

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Types

Switch command.

Command Modes

Normal.

Usage Guidelines

If the SNMP engine ID is cleared, the system automatically regenerates a local SNMP engine ID.

The SNMP engine and the SNMP entity have a one-to-one mapping. You can also identify the SNMP entity, which is represented as hexadecimal numbers only, and must be from 5 to 32 bytes long; for example, 00:00:00:09:0a:fe:ff:12:97:33:45:12.

Examples

This example shows how to display the SNMP engine ID:

Console> (enable) show snmp engineid

EngineId: 00:00:00:09:00:d0:00:4c:18:00

Engine Boots: 1234455

Console> (enable) 

Table 2-90 describes the fields in the show snmp engineid command output.

Table 2-90 show snmp engineid Command Output Fields 

Field	Description
EngineId	String identifying the name of the SNMP copy on the device.
Engine Boots	Number of times an SNMP engine has been started or reinitialized.

Related Commands

show snmp

show snmp group

To display the name of the SNMP group or collection of users who have a common access policy, use the show snmp group command.

show snmp group [volatile | nonvolatile | read-only]

show snmp group [-hex] {groupname} [-hex] user {username}
[security-model {v1 | v2c | v3}]

Syntax Description

volatile	(Optional) Specifies the storage type is defined as temporary memory and the content is deleted if the device is turned off.
nonvolatile	(Optional) Specifies the storage type is defined as persistent memory and the content remains after the device is turned off and on again.
read-only	(Optional) Specifies that the storage type is defined as read only.
-hex	(Optional) Displays groupname and username as a hexadecimal character.
groupname	Name of the SNMP group or collection of users who have a common access policy.
user username	Specifies the SNMP group username.
security-model v1 | v2c | v3	(Optional) Specifies security model v1, v2c, or v3.

Defaults

The default storage type is volatile.

Command Types

Switch command.

Command Modes

Normal.

Usage Guidelines

If you use special characters for the groupname and username (nonprintable delimiters for these parameters), you must use a hexadecimal keyword, which is one or two hexadecimal digits separated by a colon (:); for example, 00:ab:34.

There are three versions of SNMP:

•Version 1 (SNMPv1)—This is the initial implementation of SNMP. Refer to RFC 1157 for a full description of functionality.

•Version 2 (SNMPv2c)—The second release of SNMP, described in RFC 1902, has additions and enhancements to data types, counter size, and protocol operations.

•Version 3 (SNMPv3)—This is the most recent version of SNMP and is fully described in RFC 2571, RFC 2572, RFC 2573, RFC 2574, and RFC 2575. SNMPv3 has significant enhancements to administration and security.

The SNMP functionality on the Catalyst enterprise LAN switches for SNMP v1 and SNMP v2c remains intact; however, the functionality has greatly expanded for SNMPv3. Refer to the "Configuring SNMP" chapter of the Catalyst 6500 Series Switch Software Configuration Guide for more information on SNMPv3.

The read-only keyword is supported for security model v3 only.

Examples

This example shows how to display the SNMP group:

Console> (enable) show snmp group

Security Model: v1

Security Name: public

Group Name: defaultROgroup

Storage Type: volatile

Row Status: active

Security Model: v1

Security Name: secret

Group Name: defaultRWALLgroup

Storage Type: volatile

Row Status: active

Security Model: v1

Security Name: private

Group Name: defaultRWgroup

Storage Type: volatile

Row Status: active

Security Model: v2c

Security Name: public

Group Name: defaultROgroup

Storage Type: volatile

Row Status: active

Console> (enable) 

Table 2-91 describes the fields in the show snmp group command output.

Table 2-91 show snmp group Command Output Fields 

Field	Description
Security Model	Security model used by the group.
Security Name	Security string definition.
Group Name	Name of the SNMP group or collection of users who have a common access policy.
Storage Type	Indicates whether the settings are volatile or nonvolatile.
Row Status	Status of the entry.

Related Commands

clear snmp group
set snmp group

show snmp ifalias

To display SNMP interface aliases, use the show snmp ifalias command.

show snmp ifalias [ifIndex]

show snmp ifalias module mod

show snmp ifalias vlan [vlan]

show snmp ifalias channel

Syntax Description

ifIndex	(Optional) Number of the interface index.
module	Displays module interface aliases.
mod	Number of the module.
vlan	Displays VLAN interface aliases.
vlan	(Optional) Number of the VLAN.
channel	Displays channel interface aliases.

Defaults

This command has no default settings.

Command Types

Switch command.

Command Modes

Normal.

Usage Guidelines

If you do not enter an interface index number, all interface aliases are displayed.

Related Commands

clear snmp ifalias
set snmp ifalias

show snmp inform

To display information about the SNMP version 3 inform request feature, use the show snmp inform command.

show snmp inform

Syntax Description

This command has no keywords or arguments.

Defaults

This command has no default settings.

Command Types

Switch command.

Command Modes

Normal.

Examples

This example shows how to display information about the inform request feature:

Console> show snmp inform

Inform Pending Limit: 150

SNMPv3 inform counters:    

--------------------------------- 

Total informs created : 1001

Total inform responsed: 100

Total inform in queue : 100

Total infrom removed  : 0

Total inform timeout  : 801

Console>

Related Commands

clear snmp inform
set snmp inform

show snmp notification mapping

To display the SNMP notification mapping, use the show snmp notification mapping command.

show snmp notification mapping

Syntax Description

This command has no keywords or arguments.

Defaults

None.

Command Types

Switch command.

Command Modes

Normal.

Examples

This example shows how to display the SNMP notification mapping:

Console> (enable) show snmp notification mapping

Trap Keyword     Notification Object Name               Notif. Sent Syslog

--------------------------------------------------------------------------------

auth             authenticationFailure                  SNMPAUTHFAIL           

autoshutdown     cmasModuleAutoShutdown                 MODAUTOSHUTTRAP        

bridge           newRoot                                NEWROOTTRAP            

                 topologyChange                         TOPOTRAP               

callhomesmtp     ccmSmtpServerFailNotif                 SMTPSERVERFAILNOTIF    

chassis          chassisAlarmOn                         CHASSISALARM           

                 chassisAlarmOff                        CHASSISALARM           

config           sysConfigChangeTrap                    SYSCONFIGCHANGENOTIF   

entity           entConfigChange                        ENTITYTRAP             

entityfru        cefcModuleStatusChange                 ENTITYMODTRAP          

                 cefcPowerStatusChange                  ENTITYPOWERTRAP        

                 cefcFRUInserted                        FRUINSERTEDTRAP        

                 cefcFRURemoved                         FRUREMOVEDTRAP         

                 cefcPowerSupplyOutputChange            POWEROUTPUTCHANGENOTIF 

envtemp          ciscoEnvMonTemperature                 ENVMONTEMPTRAP         

envshutdown      ciscoEnvMonShutdown                    ENVMONSHUTDOWNTRAP     

envfan           ciscoEnvMonFanNotification             ENVMONFANTRAP          

envpower         ciscoEnvMonRedundantSupplyNotification ENVMONPOWERTRAP        

envstate         ciscoEnvMonTempStatusChangeNotif       ENVMONTEMPTRAP         

                 ciscoEnvMonFanStatusChangeNotif        ENVMONFANTRAP          

                 ciscoEnvMonSuppStatusChangeNotif       ENVMONPOWERTRAP        

flashinsert      ciscoFlashDeviceInsertedNotif          FLASHINSERTEDNOTIF     

flashremove      ciscoFlashDeviceRemovedNotif           FLASHREMOVEDNOTIF      

flexifchange     cflIfStatusChangeNotif                 FLEXLINKSTATUSNOTIF    

inlinepower      pethPsePortOnOffNotification           PETHPORTONOFFTRAP      

ippermit         ipPermitDeniedTrap                     IPPERMITDENIEDNOTIF    

l2ctrl           clcIfMacLimitHighNotif                 CLCIFHIGHTRAP          

                 clcIfMacLimitLowNotif                  CLCIFLOWTRAP           

                 clcIfVlanMacLimitHighNotif             CLCIFVLANHIGHTRAP      

                 clcIfVlanMacLimitLowNotif              CLCIFVLANLOWTRAP       

                 clcVlanMacLimitHighNotif               CLCVLANHIGHTRAP        

                 clcVlanMacLimitNotif                   CLCVLANLOWTRAP         

l2tunnel         cltcTunnelDropThresholdExceeded        CLTCDROPEXCEEDTRAP     

                 cltcTunnelShutdownThresholdExceeded    CLTCSHUTEXCEEDTRAP     

linkerrhigh      clemHighThresholdExceeded              CLEMHIGHTHRESHEXCDTRAP 

linkerrlow       clemLowThresholdExceeded               CLEMLOWTHRESHEXCDTRAP  

macmove          cmnMacMoveNotification                 MACMOVENOTIF           

mac              cmnMacChangedNotification              MACCHANGEDNOTIF        

macthreshold     cmnMacThresholdExceedNotif             MACTHRESHOLDEXCEEDNOTIF

module           moduleUp                               MODULETRAP             

                 moduleDown                             MODULETRAP             

noauthfailvlan   cpaeNoAuthFailVlanNotif                NOAUTHFAILVLANNOTIF    

noguestvlan      cpaeNoGuestVlanNotif                   NOGUESTVLANNOTIF       

redundancy       ciscoRFSwactNotif                      RFSWACTTRAP            

                 ciscoRFProgressionNotif                RFPROGRESSIONTRAP      

stpx             stpxInconsistencyUpdate                STPXTRAP               

                 stpxRootInconsistencyUpdate            STPXTRAPROOT           

                 stpxLoopInconsistencyUpdate            STPXTRAPROOT           

syslog           clogMessageGenerated                                          

system           ciscoSystemClockChanged                CLOCKCHANGETRAP        

sysinfolog       csilLoggingFailNotif                   SYSINFOLOGFAILNOTIF    

vlancreate       vtpVlanCreated                         VLANCREATEDNOTIF       

vlandelete       vtpVlanDeleted                         VLANDELETEDNOTIF       

vmps             vmVmpsChange                           VMPSCHANGENOTIF        

vtp              vtpConfigRevNumberError                VTPREVERRORNOTIF       

                 vtpLocalModeChanged                    VTPLOCALMODENOTIF      

                 vtpVersionInUseChanged                 VTPVERCHANGEDNOTIF     

                 vtpVersionOneDeviceDetected            VTPVERONENOTIF         

                 vlanTrunkPortDynamicStatusChange       TRUNKSTATUSCHANGEDNOTIF

                 vtpConfigDigestError                   CONFIGDIGESTERROR      

Console> (enable)

show snmp notify

To display the snmpNotifyTable configuration, use the show snmp notify command.

show snmp notify [volatile | nonvolatile | read-only]

show snmp notify [-hex] {notifyname}

Syntax Description

volatile	(Optional) Specifies the storage type is defined as temporary memory and the content is deleted if the device is turned off.
nonvolatile	(Optional) Specifies the storage type is defined as persistent memory and the content remains after the device is turned off and on again.
read-only	(Optional) Specifies that the storage type is defined as read only.
-hex	(Optional) Displays notifyname as a hexadecimal character.
notifyname	A unique identifier to index the snmpNotifyTable.

Defaults

The default storage type is nonvolatile.

Command Types

Switch command.

Command Modes

Normal.

Usage Guidelines

If you use special characters for the notifyname value (nonprintable delimiters for this parameter), you must use a hexadecimal keyword, which is one or two hexadecimal digits separated by a colon (:); for example, 00:ab:34.

The read-only keyword is supported for security model v3 only.

Examples

This example shows how to display the SNMP notify information for a specific notifyname value:

Console> (enable) show snmp notify snmpV1Notification

Notify Name: snmpV1Notification

Notify Tag: snmpV1Trap

Notify Type: trap

Storage Type: volatile

Row Status: active

Console> (enable)

Table 2-92 describes the fields in the show snmp notify command output.

Table 2-92 show snmp notify Command Output Fields 

Field	Description
Notify Name	Unique identifier used to index the snmpNotifyTable.
Notify Tag	Name of the entry in the snmpNotifyTable.
Notify Type	Type of notification.
Storage Type	Storage type (volatile or nonvolatile).
Row Status	Status of the entry.

Related Commands

clear snmp notify
set snmp notify

show snmp rmonmemory

To display the memory usage limit in percentage, use the show snmp rmonmemory command.

show snmp rmonmemory

Syntax Description

This command has no arguments or keywords.

Defaults

This command has no default settings.

Command Types

Switch command.

Command Modes

Normal.

Usage Guidelines

The percentage value displayed indicates that you cannot create new RMON entries or restore entries from the NVRAM if the specified memory usage is exceeded.

Examples

This example shows how to display the RMON memory limit use:

Console> (enable) show snmp rmonmemory

85 percent

Console> (enable) 

Related Commands

set snmp rmonmemory

show snmp targetaddr

To display the SNMP target address entries in the snmpTargetAddressTable, use the show snmp targetaddr command.

show snmp targetaddr [volatile | nonvolatile | read-only]

show snmp targetaddr [-hex] {addrname}

Syntax Description

volatile	(Optional) Specifies the storage type is defined as temporary memory and the content is deleted if the device is turned off.
nonvolatile	(Optional) Specifies the storage type is defined as persistent memory and the content remains after the device is turned off and on again.
read-only	(Optional) Specifies that the storage type is defined as read only.
-hex	(Optional) Displays addrname as a hexadecimal character.
addrname	Name of the target agent; the maximum length is 32 bytes.

Defaults

The default storage type is nonvolatile.

Command Types

Switch command.

Command Modes

Normal.

Usage Guidelines

If you use special characters for the addrname value (nonprintable delimiters for this parameter), you must use a hexadecimal keyword, which is one or two hexadecimal digits separated by a colon (:); for example, 00:ab:34.

The read-only keyword is supported for security model v3 only.

Examples

This example shows how to display specific target address information in the snmpTargetAddressTable:

Console> (enable) show snmp targetaddr cisco

Target Address Name: cisco

IP Address: 170.0.25.1

UDP Port#: 165

Timeout: 100

Retry count: 5

Tag List: tag1 tag2 tag3

Parameters: jeorge

Storage Type: nonvolatile

Row Status: active

Console> (enable)

Table 2-93 describes the fields in the show snmp targetaddr command output.

Table 2-93 show snmp targetaddr Command Output Fields 

Field	Description
Target Address Name	Name of the target address.
IP Address	Target IP address.
UDP Port #	Number of the UDP port of the target host to use.
Timeout	Number of timeouts.
Retry count	Number of retries.
Tag List	Tags that point to target addresses to send notifications to.
Parameters	Entry in the snmpTargetParamsTable; the maximum length is 32 bytes.
Storage Type	Storage type (volatile or nonvolatile).
Row Status	Status of the entry.

Related Commands

clear snmp targetaddr
set snmp targetaddr

show snmp targetparams

To display the SNMP parameters used in the snmpTargetParamsTable when generating a message to a target, use the show snmp targetparams command.

show snmp targetparams [volatile | nonvolatile | read-only]

show snmp targetparams [-hex] {paramsname}

Syntax Description

volatile	(Optional) Specifies that the storage type is defined as temporary memory and that the content is deleted if the device is turned off.
nonvolatile	(Optional) Specifies the storage type is defined as persistent memory and that the content remains after the device is turned off and on again.
read-only	(Optional) Specifies that the storage type is defined as read only.
-hex	(Optional) Displays paramsname as a hexadecimal character.
paramsname	Name of the parameter in the snmpTargetParamsTable; the maximum length is 32 bytes.

Defaults

The default storage type is volatile.

Command Types

Switch command.

Command Modes

Normal.

Usage Guidelines

If you use special characters for the paramsname value (nonprintable delimiters for this parameter), you must use a hexadecimal keyword, which is one or two hexadecimal digits separated by a colon (:); for example, 00:ab:34.

The read-only keyword is supported for security model v3 only.

Examples

This example shows how to display specific target parameter information in the snmpTargetParamsTable:

Console> (enable) show snmp targetparams snmpV1TrapParams

Target Parameter Name: snmpV1TrapParams

Message Processing Model: v1

Security Name: public

Security Level: noauthentication

Storage Type: volatile

Row Status: active

Console> (enable)

Table 2-94 describes the fields in the show snmp targetparams command output.

Table 2-94 show snmp targetparams Command Output Fields 

Field	Description
Target Parameter Name	A unique identifier used to index the snmpTargetParamsTable.
Message Processing Model	Version number used by the Message Processing Model.
Security Name	Security string definition.
Security Level	Type of security level: •Authentication—The security level is set to use the authentication protocol. •Noauthentication—The security level is not set to use the authentication protocol.
Storage Type	Status of whether the settings are volatile or nonvolatile.
Row Status	Status of the entry.

Related Commands

clear snmp targetparams
set snmp targetparams

show snmp user

To display SNMP information for a specific user, use the show snmp user command.

show snmp user [volatile | nonvolatile | read-only]

show snmp user [-hex] {user} [remote {engineid}]

show snmp user summary

Syntax Description

volatile	(Optional) Specifies the storage type is defined as temporary memory and the content is deleted if the device is turned off.
nonvolatile	(Optional) Specifies the storage type is defined as persistent memory and the content remains after the device is turned off and on again.
read-only	(Optional) Specifies that the storage type is defined as read only.
-hex	(Optional) Displays user as a hexadecimal character.
user	Name of the SNMP user.
remote engineid	(Optional) Specifies the username on a remote SNMP engine.
summary	Specifies a summary of SNMP users.

Defaults

The default storage type is nonvolatile, and the local SNMP engine ID is used.

Command Types

Switch command.

Command Modes

Normal.

Usage Guidelines

If you use special characters for the user value (nonprintable delimiters for this parameter), you must use a hexadecimal keyword, which is one or two hexadecimal digits separated by a colon (:); for example, 00:ab:34.

The read-only keyword is supported for security model v3 only.

Examples

This example shows how to display specific user information:

Console> (enable) show snmp user joe

EngineId: 00:11:22:33:44

User Name: joe

Authentication Protocol: md5

Privacy Protocol: des56

Storage Type: volatile

Row Status: active

Console> (enable)

Table 2-95 describes the fields in the show snmp user command output.

Table 2-95 show snmp user Command Output Fields 

Field	Description
EngineId	String identifying the name of the copy of SNMP on the device.
User Name	String identifying the name of the SNMP user.
Authentication Protocol