Feedback
Table Of Contents
Symbols - A - B - D - E - I - L - M - O - P - R - S - T -
Index
Symbols
(*, G)
description 2-4
state creation 4-3
static groups 3-6
static groups on the OIF 3-6
(S, G)
description 2-3
IGMPv3 snooping 5-3
state creation 4-3
static groups 3-6
static groups on the OIF 3-6
A
Anycast-RP
configuring an Anycast-RP set 4-21
description 4-6
MSDP (Note) 6-2
Any Source Multicast. See ASM mode
ASM mode
configuring 4-15
configuring shared trees only 4-23
description 4-2
join-prune messages 4-3
autonomous systems
MSDP 6-2
Auto-RP
candidate RP configuration steps 4-20
candidate RPs, configuring 4-19
configuring 4-19
description 4-5
mapping agent configuration steps 4-20
mapping agents
configuring 4-19
configuring route maps 4-29
RP-Announce messages 4-5
RP-Discovery messages 4-5
B
BGP
autonomous systems
MSDP 6-2
MSDP 6-2
BSRs
candidate BSR configuration steps 4-17
candidate BSRs
configuring 4-17
description 4-4
candidate RP configuration steps 4-17
candidate-RP messages
description 4-4
candidate RPs, configuring 4-17
configuring 4-16
description 4-4
messages
description 4-4
enabling listen and forward 4-5
route maps, configuring 4-29
RP configuration steps 4-17
D
documentation
related documents 1-xiii
DRs
description 4-7
PIM domains 2-6
priority and PIM hello message 4-2
SSM mode 4-26
E
ECMP 4-2
equal-cost multipathing 4-2
I
IGMP
all-hosts multicast group 3-2
configuration, example 3-14
description 3-1
enabling 3-1
IGMPv3
changes from IGMPv2 3-2
description 3-3
SSM 3-3
licensing requirements 3-4
parameters
configuring 3-5
default settings 3-5
PIM domains 2-6
queriers
description 3-3
designated 3-2
TTL 3-3
version, default (IGMPv2) 3-2
versions, description 3-2
IGMP commands
hardware profile multicast prefer-source-tree 4-26
iip igmp enforce-router-alert 3-13
ip igmp access-group 3-10
ip igmp flush-routes 3-13
ip igmp group-timeout 3-10
ip igmp immediate-leave 3-10
ip igmp join-group 3-9
ip igmp last-member-query-count 3-10
ip igmp last-member-query-response-time 3-10
ip igmp querier-timeout 3-9
ip igmp query-interval 3-10
ip igmp query-max-response-time 3-10
ip igmp query-timeout 3-9
ip igmp report-link-local-groups 3-10
ip igmp report-policy 3-10
ip igmp robustness-variable 3-9
ip igmp ssm-translate 3-12
ip igmp startup-query-count 3-9
ip igmp startup-query-interval 3-9
ip igmp static-oif 3-9
ip igmp version 3-8
IGMP configuration
access groups 3-7
example 3-14
group membership timeout 3-2, 3-7
immediate leave 3-7
last member query count 3-7
last member query response interval 3-7
member query response interval 3-4
number of query messages 3-3
parameters 3-5
parameters, default settings 3-5
querier timeout 3-6
query interval 3-7
query maximum response time 3-3
query max response time 3-6
report link local multicast groups 3-7
report policy 3-7
reports for link local addresses 3-4
startup query count 3-6
startup query interval 3-6
static multicast groups 3-6
Static multicast groups on OIF 3-6
version 3-6
IGMP membership reports
IGMPv3 suppression 3-3
initiating receipt of multicast data 3-2
SSM translation 3-11
suppressing 3-3
IGMP queriers
description 3-3
designated 3-2
TTL 3-3
IGMP show commands
show ip igmp groups 3-13
show ip igmp interface 3-13
show ip igmp local-groups 3-13
show ip igmp route 3-13
show running-configuration igmp 3-13
show startup-configuration igmp 3-13
IGMP snooping
configuration, example 5-12
configuring 5-5
description 5-1
event history buffer size 5-6
licensing requirements 5-4
membership report suppression 5-2
parameters, configuring 5-8
parameters, default settings 5-4
prerequisites 5-4
proprietary features 5-2
querier, description 5-3
statistics 5-12
status 5-5
switch example 5-2
troubleshooting 5-5
vPC statistics 5-12
IGMP snooping commands
ip igmp snooping 5-10
ip igmp snooping explicit-tracking 5-10
ip igmp snooping fast-leave 5-10
ip igmp snooping last-member-query-interval 5-10
ip igmp snooping link-local-groups-suppression 5-11
ip igmp snooping mrouter interface 5-11
ip igmp snooping querier 5-10
ip igmp snooping report-suppression 5-10
ip igmp snooping static-group 5-11
ip igmp snooping v3-report-suppression 5-11
IGMP snooping configuration
enabling 5-8
example 5-12
explicit tracking 5-8
fast leave 5-8
last member query interval 5-8
parameters
configuring 5-8
default settings 5-4
IGMP snooping show commands
show ip igmp snooping 5-11
show ip igmp snooping explicit-tracking 5-11
show ip igmp snooping groups 5-11
show ip igmp snooping mroute 5-11
show ip igmp snooping querier 5-11
IGMPv3
changes from IGMPv2 3-2
description 3-3
SSM 3-3
interdomain multicast protocols
MSDP 2-8
SSM 2-8
Internet Group Management Protocol. See IGMP
L
licensing requirements, multicast 2-9
M
MFIB
description 2-9
flushing routes 4-33
MRIB and M6RIB
description 2-8
flushing routes 4-33
MSDP
Anycast-RP (Note) 6-2
configuration, example 6-16
description 6-1
full mesh, description 6-2
interdomain multicast protocol 2-8
licensing requirements 6-3
mesh groups, description 6-3
parameters, default settings 6-4
peering, steps to configure 6-4
peer-RPF flooding, description 6-3
peers, description 6-1
prerequisites 6-4
SA cache, description 6-3
SA messages, and PIM register messages 6-3
SA messages, description 6-1, 6-2
statistics
clearing 6-15
displaying 6-15
MSDP commands
feature msdp 6-6
ip msdp description 6-9
ip msdp flush-routes 6-14
ip msdp group-limit 6-11
ip msdp mesh-group 6-13
ip msdp originator-id 6-11
ip msdp password 6-9
ip msdp peer 6-7
ip msdp sa-interval 6-11
ip msdp sa-limit 6-9
ip msdp sa-policy 6-9
ip msdp shutdown 6-9
MSDP configuration
administrative shutdown 6-8
commands, cached (Note) 6-5
description field 6-8
enabling 6-5
example 6-16
group limit 6-10
MD5 password 6-8
mesh groups 6-12
originator interface name 6-10
parameters, default settings
peering, steps to configure 6-4
peers and peering relationship 6-6
restarting the MSDP process 6-13
SA messages
interval 6-10
limit 6-8
policy IN 6-8
policy OUT 6-8
MSDP show commands
show ip msdp 6-15
show ip msdp count 6-14
show ip msdp mesh-group 6-14
show ip msdp peer 6-14
show ip msdp policy statistics sa-policy 6-15
show ip msdp route 6-15
show ip msdp rpf 6-14
show ip msdp sa-cache 6-15
show ip msdp sources 6-14
show ip msdp summary 6-14
MSDP statistics commands
clear ip msdp peer 6-16
clear ip msdp policy statistics sa-policy 6-16
clear ip msdp route 6-16
clear ip msdp sa-cache 6-16
clear ip msdp statistics 6-16
multicast
administratively scoped IP, description 4-8
channel 2-1
description 2-1
distribution modes
ASM 4-2
SSM 4-2
forwarding 2-4
group 2-1
interdomain protocols
MSDP 2-8
SSM 2-8
IPv4 addresses 2-1
licensing requirements 2-9
protocols
IGMP 3-1
IGMP snooping 5-1
MSDP 6-1
PIM 2-5
restarting processes
MSDP 6-13
multicast distribution trees
description 2-2
PIM 2-5
SPTs, description 2-2
Multicast Forwarding Information Base. See MFIB
Multicast Routing Information Base. See MRIB
multicast routing table (MRT)
limit 4-24
Multicast Source Discovery Protocol. See MSDP
O
OIF
RPF check 2-4
P
PIM
configuration steps 4-10
configuring, description 4-9
dense mode 2-5
enabling 4-2
failure detection 4-3
guidelines and limitations 4-8
licensing requirements 4-8
message filtering 4-30
parameters, default settings 4-9
refreshing state 4-3
statistics
clearing 4-35
displaying 4-35
PIM commands
feature pim 4-11
ip mroute 4-28
ip pim anycast-rp 4-22
ip pim auto-rp listen 4-13
ip pim auto-rp mapping-agent 4-21
ip pim auto-rp mapping-agent-policy 4-33
ip pim auto-rp rp-candidate 4-21
ip pim auto-rp rp-candidate-policy 4-32
ip pim border 4-15
ip pim bsr bsr-policy 4-32
ip pim bsr-candidate 4-18
ip pim bsr listen 4-13
ip pim bsr rp-candidate-policy 4-32
ip pim dr-priority 4-14
ip pim flush-routes 4-34
ip pim hello-authentication ah-md5 4-14
ip pim hello-interval 4-15
ip pim jp-policy 4-33
ip pim log-neighbor-changes 4-32
ip pim neighbor-policy 4-15
ip pim register-policy 4-32
ip pim register-rate-limit 4-14
ip pim rp-address 4-16
ip pim rp-candidate 4-18
ip pim send-rp-announce 4-21
ip pim send-rp-discovery 4-21
ip pim sparse-mode 4-14
ip pim ssm range 4-27
ip pim use-shared-tree-only 4-24
ip routing multicast holddown 4-14
PIM configuration
Auto-RP candidate RP policy (PIM only) 4-31
Auto-RP mapping agent policy (PIM only) 4-31
Auto-RP message action (PIM only) 4-11
BSR candidate RP policy 4-31
BSR message action 4-11
BSR policy 4-31
description 4-9
designated router priority 4-12
domain border 4-12
examples
ASM mode using BSR 4-37
ASM mode using PIM Anycast-RP 4-38
SSM mode 4-36
feature, enabling 4-10
flushing routes 4-33
hello authentication mode 4-12
hello interval 4-12
Initial holddown period 4-12
join-prune policy 4-31
logging neighbor changes 4-30
neighbor policy 4-12
parameters, default settings 4-9
PIM register policy 4-31
Register rate limit 4-12
sparse mode, enabling 4-12
sparse mode parameters 4-11
steps to configure 4-10
PIM domains
border parameter 4-8
description
PIM 2-6
MSDP (PIM) 6-1
PIM messages
Anycast-RP 4-6
authenticating hello with MD5 hash value 4-3
DR priority 4-2
filtering join-prune 4-3
hello, description 4-2
join and state creation 4-3, 4-4
join-prune, description 4-3
join-prune and join or prune (Note) 4-3
MSDP SA messages 6-3
register
description 4-7
filtering 4-7
MSDP 6-1
PIM show commands
show ip mroute 4-34
show ip pim group-range 4-34
show ip pim interface 4-34
show ip pim neighbor 4-34
show ip pim oif-list 4-34
show ip pim policy statistics 4-35
show ip pim route 4-35
show ip pim rp 4-35
show ip pim rp-hash 4-35
show ip pim vrf 4-35
show running-configuration pim 4-35
show startup-configuration pim 4-35
PIM statistics commands
clear ip pim interface statistics 4-36
clear ip pim policy statistics 4-36
clear ip pim statistics 4-36
Protocol Independent Multicast. See PIM 2-5
R
restarting multicast processes
MSDP 6-13
reverse path forwarding. See RPF
route maps
Auto-RP mapping agent configuration 4-29
BSR configuration 4-29
RP configuraion 4-29
RP-Announce messages, and Auto-RP 4-5
RP-Discovery messages, and Auto-RP 4-5
RPF
check 2-4
configuring routes 4-28
PIM 2-5
static multicast 2-7
RPs
address selection 4-4
Anycast-RP, description 4-6
Auto-RP, description 4-5
BSRs, description 4-4
default mode (ASM) 2-7
description 4-4
MSDP 6-1
PIM domains 2-6
route maps, configuring 4-29
selection process 4-5
static, description 4-4
static addresses, configuring 4-16
RP trees. See multicast distribution trees, shared
RPTs. See multicast distribution trees, shared
S
SPTs
description 2-2
SSM mode 4-3
SSM mapping. See SSM translation
SSM mode
configuring 4-26
DRs 4-26
group range, configuring 4-27
IGMPv3 3-3
interdomain multicast protocol 2-8
join-prune messages 4-3
SSM translation
description 3-11
IGMPv1 and IGMPv2 3-3
T
troubleshooting 5-1