Feedback
Table Of Contents
UCS Storage Interoperability Matrix
UCS Storage Interoperability Matrix
The following table lists storage systems that have been qualified by the Original Storage Manufacturers (OSMs), Cisco Partners, and the Cisco Storage Enterprise Assurance Lab (SEAL) to support seamless deployment of networks using Cisco Unified Computing System products.
Note
Starting with Cisco UCS B-Series Release 2.0(2), interoperability information for storage devices and UCS servers is maintained in the Hardware and Software Interoperability Matrix for B Series Servers in Release 2.0(2).
.
Supported Storage Arrays
Notes:
1) For detailed information on supported Servers, CNAs, and drivers, refer to the Cisco Hardware and Software Interoperability Matrix: http://www.cisco.com/en/US/products/ps10477/prod_technical_reference_list.html
2) Refer to the EMC ESM matrix for support storage firmware versions and specific supported configuration information: http://www.emc.com/products/interoperability/
3) Direct-Attached FC storage to 6120XP/6140XP/6248UP is supported in release 1.4(1) and higher. However, it is restricted to topologies in which the zoning database is provided from an upstream Cisco MDS 9000 switch or Nexus 5000 or 5500 switch.
4) Refer to NetApp NOW for more information on supported Data ONTAP versions and specific supported configuration information: http://now.netapp.com/matrix
5) Refer to Hitachi Data System interoperability matrix for more info: http://www.hds.com/products/interoperability/
6) Cisco M81KR CNA is supported only.
7) Refer to "http://www.ddn.com/" for detailed information on supported platforms.
8) SUSE 11 not supported with DS 3500 for SANBoot.
9) Cisco UCS 6248UP Fabric Interconnects and Cisco 2208 I/O modules are not supported.
10) Cisco M81KR CNA with ESX 4.1 U1 only.
11) See the Xiotech customer support matrix for storage firmware versions and specific supported configuration information: https://xone.xiotech.com/support/supportmatrix/Matrix/Fibre_Channel_over_Ethernet.aspx.
12) Cisco UCS B Series Servers and C Series Servers have the functionality to support boot from SAN.
13) iSCSI target support only.
Fabric Connectivity Matrix
.
Table 10-3 UCS-B Switch InterOp Support Matrix1
6120XP, 6140XP4 , 6248UP
300, 5100, 5300: v6.1.2b, v6.2.1b, v6.2.2b, v6.3.0c, v6.3.1a, v6.3.2a, v6.3.2b (T), v6.4.0b, v6.4.1, v6.4.1a, v6.4.1b
4100, 48000, 4900, 5000: v6.1.2, v6.1.2b, v6.2.1b, v6.2.2b, v6.3.0c, v6.3.1a, v6.3.2a, v6.3.2b (T), v6.4.0b, v6.4.1, v6.4.1a, v6.4.1b
7500: v6.1.2, v6.1.2b, v6.2.1b, v6.2.2b, v6.3.0c, v6.3.1a, v6.3.2a, v6.3.2b (T),v6.4.0b, v6.4.1, v6.4.1b
DCX-4S: v6.2.1b, v6.2.2b, v6.3.0c, v6.3.1a, v6.3.2a, v6.3.2b (T), v6.4.0b, v6.4.1, v6.4.1_fcoe, v6.4.1_fcoe1, v6.4.1a, v6.4.1b
DCX: v6.1.2, v6.1.2b, v6.2.1, v6.2.1b, v6.2.2b, v6.3.0c, v6.3.1a, v6.3.2a, v6.3.2b (T), v6.4.0b, v6.4.1, 6.4.1_fcoe, v6.4.1_fcoe1, v6.4.1a, v6.4.1b
2.0(1q), 2.0(1s), 2.0(1t)
300, 5100, 5300: v6.3.2a, v6.3.2b, v6.4.0b, v6.4.1, v6.4.1a
4100, 48000, 4900, 5000: v6.3.0c, v6.3.1a, v6.3.2a, v6.3.2b, v6.4.0b, v6.4.1, v6.4.1a
7500: v6.3.0c, v6.3.1a, v6.3.2a, v6.3.2b, v6.4.0b, v6.4.1
DCX-4S: v6.3.0c, v6.3.1a, v6.3.2a, v6.3.2b, v6.4.0b, v6.4.1, v6.4.1_fcoe, v6.4.1a
DCX: v6.3.2b, v6.4.0b, v6.4.1, v6.4.1_fcoe, v6.4.1a
1.4(1), 1.4(2), 1.4(3), 1.4(4), 2.0(1s), 2.0(1t)
300, 5100, 5300, DCX: v6.1.0c, v6.1.0f,v6.1.0h, v6.1.0j,v6.1.2b,v6.2.0c,v6.2.1, v6.3.1a
4100, 4900, 48000,5000: v5.3.1b, v5.3.2, v6.0.0c, v6.0.1a, v6.1.0c, v6.1.0f, v6.1.0h, v6.1.0j, v6.1.2b, v6.2.0c, v6.2.1, v6.2.1b, v6.3.1a, 6.4.1a
7500: v5.3.2, v5.3.2c, , v6.1.2, v6.1.2b, v6.21b, v6.2.2b, 6.4.1
DCX-4S: v6.2.0c, v6.2.0g, v6.2.1, v6.2.1b, v6.2.2b, v6.3.1a, 6.4.1a
DCX: v6.1.2, v6.1.2b, v6.2.1, v6.2.1b, v6.2.2b, v6.3.0c, v6.3.1a, v6.3.2a, 6.4.1a
1.3(1), 2.0(1s), 2.0(1t)
1 As of July 2011, UCS Series B switches no longer support McData directors and switches.
2 The 6100 fabric interconnect firmware is included in the UCS code bundle
3 NPV support mode only.
4 Switch Management Application Revision: The use of mixed code revisions in the same fabric should be limited to code upgrade processes only. You must always use the management code rev. associated with the highest level of switch code
r
UCS-C Storage Support Matrix
.
r
