- Preface
- Overview
- Installing a Cisco Nexus 7004 Switch
- Installing a Cisco Nexus 7009 Chassis
- Installing a Cisco Nexus 7010 Chassis
- Installing a Cisco Nexus 7018 Chassis
- Installing Power Supply Units
- Connecting the Cisco Nexus 7000 Switch to the Network
- Managing system hardware
- Troubleshooting
- Replacement Procedures
- Technical Specifications
- Transceiver and Module Connectors
- Cisco Nexus 7000 Series Accessory Kit Contents
- Chassis and Module LEDs
- Repacking the Nexus 7000 Series Switch for Shipment
- Site Preparation and Maintenance Records
New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 7000 Series Hardware Installation and Reference Guide. The latest version of this document is available at the following Cisco website:
http://www.cisco.com/en/US/docs/switches/datacenter/hw/nexus7000/installation/guide/n7k_hig_book.html
Table 1 summarizes the new and changed features for the Cisco Nexus 7000 Series Hardware Installation and Reference Guide, and tells you where they are documented.
|
|
|
|
|
|---|---|---|---|
Additional optics and cables supported by the 12-port 40-Gigabit Ethernet I/O module (N7K-F312FQ-25) and 6-port 40-Gigabit Ethernet I/O module (N7K-M206FQ-23) |
Chapter 7, “Connecting the Cisco Nexus 7000 Series Switch to the Network” |
||
Feedback