Feedback
Table Of Contents
New and Changed Information
This Cisco MDS 9100 Series Hardware Installation Guide applies to all the Cisco MDS SAN-OS releases.
Table 1 lists the new and changed features available with each Cisco MDS SAN-OS release for the Cisco MDS 9100 Series.
Table 1 Documented Features for the Cisco MDS 9100 Series
Cisco MDS Fibre Channel Bladeswitch overview
Description of the Cisco MDS Fibre Channel Bladeswitch for IBM BladeCenter.
3.3(1a)
Product Overview chapter.
Cisco MDS 9134 Switch overview
Description of NPIV support.
3.2(2c)
Product Overview chapter.
Cisco MDS 9124 Switch overview
Description of NPIV support.
3.2(2c)
Product Overview chapter.
Cisco MDS 9134 Switch overview
Description and illustrations of the 32-port 4-Gbps and 2-port 10-Gbps Cisco MDS 9134 Switch.
3.2(1)
Product Overview chapter.
Cisco MDS 9134 Switch installation
Description and illustrations of installing the Cisco MDS 9134 Switch and removing it.
3.2(1)
Installing the Cisco MDS 9100 Series chapter.
Cisco MDS 9134 Switch specifications
Switch specifications for the Cisco MDS 9134 Switch, including power supply requirements, heat dissipation specifications, and X2 Transceiver Specifications.
3.2(1)
Technical Specifications appendix.
Cisco MDS 9124 Switch
Additional illustrations of the 24-port Cisco MDS 9124 Switch.
Not release specific
Installing the Cisco MDS 9100 Series chapter.
Troubleshooting
Troubleshooting chapter removed.
Not release specific
For troubleshooting information, see the Cisco MDS 9000 Family Troubleshooting Guide.
Cisco MDS 9124 Switch
The 24-port Cisco MDS 9124 Switch.
3.1(1)
This guide.
Rear-facing chassis installation
Chassis installation for a cabinet with insufficient front side clearance.
Not release specific
Installing the Switch in a Cabinet with Insufficient Front Clearance, page 2-11.
Jumper power cord
Jumper power cord available for use in cabinet.
Not release specific
Telco and EIA Shelf Bracket Kit
A 2-RU shelf bracket kit that allows single-user installation and installation in a Telco rack.
Not release specific
Cisco MDS 9000 Family Telco and EIA Shelf Bracket, page A-3.
Console port to modem connection
Support for connecting the console port on the Cisco MDS 9100 Series to a modem.
1.2(2a)
Cisco MDS 9100 Series
The 20-port Cisco MDS 9120 Switch and the 40-port Cisco MDS 9140 Switch.
1.2(1a)
This guide.