Table Of Contents
Cisco CRS-1 Carrier Routing System
Hardware Documentation Guide
Cisco CRS-1 16-Slot Line Card Chassis Documentation
Cisco CRS-1 8-Slot Line Card Chassis Documentation
Cisco CRS-1 4-Slot Line Card Chassis Documentation
Cisco CRS-1 Fabric Card Chassis or
Multishelf System Documentation
Descriptions
Software Documentation
Changes to This Document
Obtaining Documentation, Obtaining Support, and Security Guidelines
Cisco CRS-1 Carrier Routing System
Hardware Documentation Guide
Your Cisco CRS-1 Carrier Routing System is shipped with a minimal set of printed documentation. You can access all available documentation, such as chassis installation and site planning guides, on the World Wide Web at http://www.cisco.com. See the "Obtaining Documentation, Obtaining Support, and Security Guidelines" section for more information.
Note 
If you have received a field-replaceable unit (FRU), the information on removing and installing FRU components is located in the installation guide for the chassis in use.
This guide includes the following sections:
•Cisco CRS-1 16-Slot Line Card Chassis Documentation
•Cisco CRS-1 8-Slot Line Card Chassis Documentation
•Cisco CRS-1 4-Slot Line Card Chassis Documentation
•Cisco CRS-1 Fabric Card Chassis or Multishelf System Documentation
•Software Documentation
•Changes to This Document
•Obtaining Documentation, Obtaining Support, and Security Guidelines
Cisco CRS-1 16-Slot Line Card Chassis Documentation
Table 1 lists the documentation that shipped with your Cisco CRS-1 16-Slot Line Card Chassis.
Table 1 Documentation Shipped with the Cisco CRS-1 16-Slot Line Card Chassis
Description
|
Document Order Number
|
Cisco CRS-1 Carrier Routing System Hardware Documentation Guide (this guide)
|
DOC-7817014=
|
Cisco CRS-1 Carrier Routing System 16-Slot Line Card Chassis Unpacking, Moving, and Securing Guide
|
DOC-7817535=
|
Regulatory Compliance and Safety Information for the
Cisco CRS-1 Carrier Routing System
|
DOC-7816150=
|
The following list includes all other available Cisco CRS-1 16-Slot Line Card Chassis hardware documentation:
•Cisco CRS-1 Carrier Routing System 16-Slot Line Card Chassis Site Planning Guide
•Cisco CRS-1 Carrier Routing System 16-Slot Line Card Chassis System Description
•Cisco CRS-1 Carrier Routing System 16-Slot Line Card Chassis Installation Guide
•Cisco CRS-1 Carrier Routing System Packet-over-SONET/SDH Physical Layer Interface Module Installation Note
•Cisco CRS-1 Carrier Routing System Gigabit Ethernet Physical Layer Interface Module Installation Note
•Cisco CRS-1 Carrier Routing System SIP and SPA Hardware Installation Guide
•Cisco CRS-1 Carrier Routing System 16-Slot Line Card Chassis Hardware Operations and Troubleshooting Guide
Cisco CRS-1 8-Slot Line Card Chassis Documentation
Table 2 lists the documentation that shipped with your Cisco CRS-1 8-Slot Line Card Chassis.
Table 2 Documentation Shipped with the Cisco CRS-1 8-Slot Line Card Chassis
Description
|
Document Order Number
|
Cisco CRS-1 Carrier Routing System Hardware Documentation Guide (this guide)
|
DOC-7817014=
|
Cisco CRS-1 Carrier Routing System 8-Slot Line Card Chassis Unpacking, Moving, and Securing Guide
|
DOC-7817615=
|
Regulatory Compliance and Safety Information for the
Cisco CRS-1 Carrier Routing System
|
DOC-7816150=
|
The following list includes all other available Cisco CRS-1 8-Slot Line Card Chassis hardware documentation:
•Cisco CRS-1 Carrier Routing System 8-Slot Line Card Chassis Site Planning Guide
•Cisco CRS-1 Carrier Routing System 8-Slot Line Card Chassis System Description
•Cisco CRS-1 Carrier Routing System 8-Slot Line Card Chassis Installation Guide
•Cisco CRS-1 Carrier Routing System Packet-over-SONET/SDH Physical Layer Interface Module Installation Note
•Cisco CRS-1 Carrier Routing System Gigabit Ethernet Physical Layer Interface Module Installation Note
•Cisco CRS-1 Carrier Routing System SIP and SPA Hardware Installation Guide
Cisco CRS-1 4-Slot Line Card Chassis Documentation
Table 3 lists the documentation that shipped with your Cisco CRS-1 4-Slot Line Card Chassis.
Table 3 Documentation Shipped with the Cisco CRS-1 4-Slot Line Card Chassis
Description
|
Document Order Number
|
Cisco CRS-1 Carrier Routing System Hardware Documentation Guide (this guide)
|
DOC-7817014=
|
Cisco CRS-1 Carrier Routing System 4-Slot Line Card Chassis Unpacking, Moving, and Securing Guide
|
DOC-7817820=
|
Regulatory Compliance and Safety Information for the
Cisco CRS-1 Carrier Routing System
|
DOC-7816150=
|
The following list includes all other available Cisco CRS-1 4-Slot Line Card Chassis hardware documentation:
•Cisco CRS-1 Carrier Routing System 4-Slot Line Card Chassis Site Planning Guide
•Cisco CRS-1 Carrier Routing System 4-Slot Line Card Chassis System Description
•Cisco CRS-1 Carrier Routing System 4-Slot Line Card Chassis Installation Guide
•Cisco CRS-1 Carrier Routing System Packet-over-SONET/SDH Physical Layer Interface Module Installation Note
•Cisco CRS-1 Carrier Routing System Gigabit Ethernet Physical Layer Interface Module Installation Note
•Cisco CRS-1 Carrier Routing System SIP and SPA Hardware Installation Guide
Cisco CRS-1 Fabric Card Chassis or
Multishelf System Documentation
Table 4 lists the documentation that shipped with your Cisco CRS-1 Fabric Card Chassis or Multishelf System.
Table 4 Documentation Shipped with the Cisco CRS-1 Fabric Card Chassis or Multishelf System
Description
|
Document Order Number
|
Cisco CRS-1 Carrier Routing System Hardware Documentation Guide (this guide)
|
DOC-7817014=
|
Cisco CRS-1 Carrier Routing System Fabric Card Chassis
Unpacking, Moving, and Securing Guide
|
DOC-7817536=
|
Cisco CRS-1 Carrier Routing System 16-Slot Line Card Chassis Unpacking, Moving, and Securing Guide
|
DOC-7817535=
|
Regulatory Compliance and Safety Information for the
Cisco CRS-1 Carrier Routing System
|
DOC-7816150=
|
The following list includes all other available Cisco CRS-1 Fabric Card Chassis or Multishelf System hardware documentation:
•Cisco CRS-1 Carrier Routing System Multishelf System Description
•Cisco CRS-1 Carrier Routing System Fabric Card Chassis Installation Guide
•Cisco CRS-1 Carrier Routing System Multishelf System Site Planning Guide
•Cisco CRS-1 Carrier Routing System Multishelf System Interconnection and Cabling Guide
•Cisco CRS-1 Carrier Routing System Multishelf System Upgrade and Conversion Guide
•Cisco CRS-1 Carrier Routing System Multishelf System Troubleshooting Guide
•Cisco CRS-1 Carrier Routing System Fiber-Optic Cleaning Guide
The following publication is related to the Catalyst 6500 Series Switch. A Catalyst 6509 Switch is required for the first-phase release of the multishelf system:
•Catalyst 6500 Series Documentation Map
Descriptions
Table 5 describes the contents of each Cisco CRS-1 hardware publication.
Table 5 Cisco CRS-1 Hardware Publications
Publication
|
Describes
|
System Description
|
Describes the hardware components that make up the chassis or system and includes details on the chassis enclosure, power and cooling systems, and all system cards. The system description is a reference publication that contains no procedural steps.
|
Installation Guide
|
Describes the installation and removal of the hardware components that make up the system and includes details on the installation and removal of all field-replaceable unit hardware, including the power modules, fan trays, system cards, and other components.
|
Site Planning Guide
|
Describes the planning steps that need to be taken before unpacking, moving, and securing the chassis or system and includes details on the space, power, and cooling requirements that should be planned for prior to installing the chassis or system.
|
Unpacking, Moving, and Securing Guide
|
Describes how to unpack the chassis and prepare it for placement at the installation site, as well as how to move the chassis from the loading dock to the installation site and how to mount it in a rack.
|
Physical Layer Interface Module (PLIM) Installation Note
|
Describes how to install and remove a PLIM and includes details on cable management and other topics that are specific to PLIMs.
|
Hardware Operations and Troubleshooting Guide
|
Describes procedures and contains information pertaining to hardware operational functions and hardware troubleshooting scenarios on a line card chassis.
|
Interconnection and Cabling Guide
|
Describes the cabling requirements, specifications, and other information related to the cabling and interconnection of a multishelf system.
|
Multishelf Upgrade and Conversion Guide
|
Describes multishelf system upgrade and conversion procedures.
|
Multishelf System Troubleshooting Guide
|
Describes procedures and contains information pertaining to hardware operational functions and hardware troubleshooting scenarios on a multishelf system.
|
Fiber-Optic Cleaning Guide
|
Describes fiber-optic cleaning procedures.
|
Regulatory, Compliance, and Safety Information
|
Presents all translated safety-related warnings and includes details on regulatory and compliance issues that pertain to all hardware components.
|
Hardware Documentation Guide
|
Provides lists of all Cisco CRS-1 hardware publications and how to obtain them.
|
Software Documentation
For a complete listing of available software documentation for the Cisco CRS-1 Carrier Routing System, see the About Cisco IOS-XR Software Documentation, available online at http://www.cisco.com.
See the "Obtaining Documentation, Obtaining Support, and Security Guidelines" section for more information.
Changes to This Document
Table 6 lists the technical changes made to this document since it was first printed.
Table 6 Changes to This Document
Revision
|
Date
|
Change Summary
|
OL-17014-05
|
August 2007
|
Removed the Cisco CRS-1 Carrier Routing System Fabric Card Chassis Site Planning Guide. The contents of this guide has been merged with the Cisco CRS-1 Carrier Routing System Multishelf System Site Planning Guide.
|
OL-17014-04
|
February 2007
|
Title change. Cisco CRS-1 Carrier Routing System Multishelf System Single-Shelf to Multishelf Upgrade Guide becomes Cisco CRS-1 Carrier Routing System Multishelf System Upgrade and Conversion Guide
|
OL-17014-03
|
November 2006
|
Cisco CRS-1 4-slot line card chassis documents were added.
|
OL-17014-02
|
May 2005
|
Cisco CRS-1 8-slot line card chassis documents were added.
|
OL-17014-01
|
December 2004
|
Initial release of this document.
|
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
