Table Of Contents
WIC-1T and WIC-2T Documentation Roadmap
Product Information and Supported Hardware and Software
Regulatory Compliance and Safety Information
Hardware Installation
Interface Numbering
Software Configuration
Configuration Examples
WIC-1T and WIC-2T Documentation Roadmap
Updated 9/21/2004
This document provides links to resources for understanding, installing, and configuring 1- and 2-port serial WAN interface cards (WICs). Use this document in HTML format on Cisco.com.
Products:
WIC-1T |
1-port serial WAN interface card |
WIC-2T |
2-port serial WAN interface card |
Note 
This is a platform-independent document. To see which routers support these products, refer to the documents in the following section.
Product Information and Supported Hardware and Software
•Understanding the 1-Port Serial WAN Interface Card (WIC-1T), tech note
•Understanding 2-Port Serial WAN Interface Card (WIC-2T), tech note
Regulatory Compliance and Safety Information
•Cisco Network Modules and Interface Cards Regulatory Compliance and Safety Information
Hardware Installation
See the following chapters of the Cisco Interface Cards Hardware Installation Guide:
•Installing Cisco Interface Cards in Cisco Access Routers
•Connecting Serial WAN Interface Cards to a Network
Interface Numbering
•Overview in the hardware installation documentation for your router
Software Configuration
•"Configuring Serial Interfaces" chapter in the Cisco IOS Interface Configuration Guide
•Cisco Signaling Link Terminal G.732 Support, Cisco IOS Release 12.2(2)T feature module
•Cisco Signaling Link Terminal, Cisco IOS Release 12.1(1)T feature module
Configuration Examples
•Configuring Basic MPLS Using IS-IS, sample configuration
•Inverse MUX Application using Multilink PPP, sample configuration
•Configuring a Basic MPLS VPN, sample configuration
•Multilink Via Virtual-Template on Two Serial Interfaces, sample configuration
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Feedback