China VWIC2-1MFT-G703-C and VWIC2-2MFT-G703-C supported modules to CISCO1906C/K9.

Table Of Contents

Release Notes for VWIC2-xMFT-G703-C Support for Cisco 1906C/K9

Contents

Introduction

System Requirements

Memory Requirements

Feature Set Tables

Related Documentation

Release Notes for VWIC2-xMFT-G703-C Support for Cisco 1906C/K9

---

Published: March 25, 2011

OL-24463-01

These release notes describe the VWIC2-xMFT-G703-C support for Cisco 1906C/K9 platforms. They should be used with the documents listed in the Related Documentation section.

These release notes are updated as needed. To ensure that you have the latest version of these release notes, go to http://www.cisco.com/en/US/products/ps10538/tsd_products_support_general_

information.html. In the Support box, choose General Information > Release Notes and then find the latest release notes for your release.

Contents

This document contains the following sections:

•Introduction

•System Requirements

•Related Documentation

Introduction

The Cisco 1906C was built on the Cisco 1900 Series Integrated Services Routers (ISRs) based on first-class products. All Cisco 1900 Series ISR products offer embedded hardware encryption acceleration, optional firewall, intrusion prevention, and advanced security services. In addition, the Cisco 1906C ISRs also have an integrated serial interface module and an EWHIC slot that can support LAN, 3G, or ISDN module options. It can also be deployed in a high-speed WAN environment, which provides better service integration capabilities and network flexibility. The Cisco 1906C improves the performance and density and will support multiple services. It will also feature multiple independent devices that can be integrated into a compact remote management system.

The Cisco 2G 1- and 2-port T1/E1 Multiflex Trunk Voice/WAN Interface (MFT VWIC2s) support data on the Cisco 1906C Series ISRs. The Cisco MFT VWIC2 combines WAN interface card (WIC) and voice interface card (VIC) functions to provide unparalleled flexibility, versatility, and investment protection through its many uses.

System Requirements

This section contains the following parts:

•Memory Requirements

•Feature Set Tables

Memory Requirements

Table 1 lists the default memory configuration of Cisco 1906C/K9.

Table 1 Default Memory Configuration

Model	Memory (DDR2 DRAM): Default / Max	USB Flash memory: Default/Max	External USB flash memory slot (Type A)
Cisco 1906C/K9	256 MB/512 MB (via license upgrade)	256 MB/256 MB (internal)	1

Feature Set Tables

Table 2 lists the product information and description of Cisco 1906C/K9.

Table 2 Product Information and Description

Product Name/ID	Description
Cisco 1906C/K9	C1906 Router, 2 GE, HWIC-1T, CAB-SS-V35MT, 256F/256D, IPBase

Table 3 lists the physical specifications of Cisco 1906C/K9.

Table 3 Physical Specifications

Physical Specifications
Dimensions (H x W x L)	1.75 H x 13.5 W x 11.5 L
Rack Height	1RU
Rack-mount 19-inch (48.3 cm) EIA	Optional
Wall installation (see Installation Guide for installation direction allowed)	Yes
Weight-with AC power supply (no module)	8 lb
Maximum weight - fully loaded	14 lb
Airflow	From rear to side

Table 4 lists the power specifications of Cisco 1906C/K9.

Table 4 Power Specifications

Power Specifications
AC input voltage	100-240 V
AC Input Frequency	47-63 Hz
AC input current range of AC power (maximum)	1.5-0.6 A
AC input surge current	Less than 50 A
Rated Power (without modules)	25 watts
AC power supply capacity of the largest	60 W

Table 5 lists the services and slot density of Cisco 1906C/K9.

Table 5 Services and Slot Density

Services and Slot Density
Minimum Cisco IOS Software Release	15.1(4)M
Embedded hardware-based encryption acceleration (IPsec + SSL)	Yes
Onboard 10/100/1000 RJ-45 LAN port	2
Serial port	Slot 0 (integrated HWIC-1T-C)
EHWIC slot	1
USB console port (mini-Type B) (up to 115.2 kbps)	1
Serial console port (up to 115.2 kbps)	1
Serial auxiliary port (up to 115.2 kbps)	1
Integrated Power	AC
Redundant Power Supply	No

Table 6 lists the modules feature comparison.

Table 6 Feature Comparison

Part Number	Number of Ports	E1 Support	Unstructured E1 (G.703) Support	Data Support WIC Mode	Drop-and- Insert Multiplexing
VWIC2-1MFT-G703-C	1	Yes	Yes	Yes	Yes
VWIC2-2MFT-G703-C	2	Yes	Yes	Yes	Yes

Table 7 lists the product description of the network modules.

Table 7 Module Product Description

Network Module	Product Description
VWIC2-1MFT-G703-C	1-port E1 only C-series Voice/WAN with drop and insert unstructured E1 (G703)
VWIC2-2MFT-G703-C	2-port E1 only C-Series Voice/WAN with drop and insert unstructured E1 (G703)

Table 8 lists the compliance information of Cisco 1906C/K9.

Table 8 Compliance 

Compliance	Description
Security	UL 60950-1 CAN / CSA C22.2 No. 60950-1 EN 60950-1 AS / NZS 60950-1 IEC 60950-1
EMC	47 CFR, Part 15 ICES-003 Class A EN55022 Class A CISPR22 Class A AS / NZS 3548 Class A VCCI V-3 EN 300-386 EN 61000 (Immunity) EN 55024, CISPR 24 EN50082-1
Telecommunications	TIA/EIA/IS-968 CS-03 CS-03 ANSI T1.101 IEEE 802.3 RTTE Directive

Related Documentation

Table 9 describes the related documentation available for VWIC2-1MFT-G703-C and VWIC2-1MFT-G703-C support for Cisco 1906C/K9.

Table 9 VWIC2-1MFT-G703-C and VWIC2-1MFT-G703-C support for Cisco 1906C/K9 Documentation

Document Title	Available Formats
Cisco 2nd Generation 1 and 2 Port T1E1 Multiflex Trunk Voice WAN Interface Cards	http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8028d2db.html
Cisco 1906C Series Integrated Services Routers	http://www.cisco.com/web/CN/products/products_netsol/routers/products/isr/isr_1906c.html

---

This document is to be used in conjunction with the documents listed in the Related Documentation section.

Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2011 Cisco Systems, Inc. All rights reserved.