Table Of Contents

New and Changed Information

New and Changed Information

---

This table summarizes the new and changed information for the Cisco ONS 15454 DWDM Configuration Guide, and tells you where the features are documented.

Table 1 New and Changed Features

Feature	Description	Introduced/Changed in Release	Where Documented
100G-LC-C, 10x10G-LC, and CFP-LC Card Enhancements	This feature was enhanced.	Changed in 9.6.0.3	Provision Transponder and Muxponder Cards chapter •100G-LC-C,10x10G-LC, and CFP-LC Cards •G33 Create a Y-Cable Protection Group •G235 Provision an Operating Mode on the 100G-LC-C, 10x10G-LC, or CFP-LC Card •G714 Change the 100G-LC-C, 10x10G-LC, or CFP-LC Card Line Settings •G722 Change the 100G-LC-C Card OTN Settings Create Optical Channel Circuits and Provisionable Patchcords chapter •G76 Provision DCC/GCC Terminations Manage Network Connectivity chapter •Proactive Protection Regen Card Features appendix •Card Protection
AR_XPE Card	This card was introduced.	Introduced in 9.6.0.3	Provision Transponder and Muxponder Cards chapter •AR_MXP, AR_XP, and AR_XPE Cards •G321 Provision Multiple Operating Modes on AR_MXP, AR_XP, or AR_XPE Cards •G322 Modify the AR_MXP, AR_XP, or AR_XPE Card Line Settings and PM Parameter Thresholds •G33 Create a Y-Cable Protection Group
GMPLS Restoration and UNI	This feature was introduced.	Introduced in 9.6.0.3	Node Reference chapter •GMPLS Optical Restoration •GMPLS UNI Create Optical Channel Circuits and Provisionable Patchcords chapter •G334 Configure GMPLS Optical Restoration
Lamp Test Per Card	This feature was introduced.	Introduced in 9.6.0.3	Card Features appendix •Lamp Test •G335 Perform Lamp Test
Persistence of Perspective View	This feature was introduced.	Introduced in 9.6.0.3	Connecting the PC and Logging into the GUI chapter •NTP-G336 Persist Perspective View
Enhancements in 40E-MXP-C and 40ME-MXP-C Cards	This feature was introduced.	Introduced in 9.6.0.3	Provision Transponder and Muxponder Cards chapter •40G-MXP-C, 40E-MXP-C, and 40ME-MXP-C Cards •G735 Provision the 40G Muxponder Ethernet Settings •G666 Change the 40G Muxponder Line Settings
Automatic Power Calculations	This feature was introduced.	Introduced in 9.6.0.3	Turn Up a Node chapter •G30 Install the DWDM Cards Cisco ONS 15454 Hardware Installation Guide •DC Power Module •Power Calculation (link to be provided)
Splitter Wavelengths	This feature was introduced.	Introduced in 9.6.0.3	Provision Transponder and Muxponder Cards chapter •OTU2_XP Card •AR_MXP, AR_XP, and AR_XPE Cards
CIR and PIR Granularity	This feature was introduced.	Introduced in 9.6.0.3	Provision Transponder and Muxponder Cards chapter •G612 Modify the Parameters of the Channel Group Using CTC •G380 Provision the GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Card Ethernet Settings •G471 Create a SVLAN or CVLAN Profile