Table 6-1 TL1 Errors
Error Code
|
Error messages
|
ENEQ
|
Communication Failed
Control Not Provisioned
Cost Not Found
Equipment Is Deleted
Equipment Not Found
Equipment Not Present
Equipment Not Provisioned
|
IP Address Not Found
IP Mask Not Found
Next Hop Not Found
No standby present
No standby provisioned
Not Equipped
Sensor IF Is Not Found
|
IBEX
|
Extra Datablock
Extra parameters
|
|
ICNV
|
Equipment In Use
Invalid Command
PM Type Not Supported
|
|
IDMS
|
Data Missing
Loopback Type Missing
Missing Internal Data
|
|
IDNC
|
Invalid Data
Invalid PST Value
Invalid SST Value
|
|
IDNV
|
AISONLPBK Not Supported
AMPLMODE Not Supported
CALOPWR Not Supported
CALTILT Not Supported
CHPOWER Not Supported
Cannot Access DCC
DCC is in use
Description Too Long
Edit Line Code Failed
Interval Out Of Range
Invalid Alarm Message
Invalid Data Rate
Invalid Data Rate
Invalid Drop Path
Invalid Equipment Type
Invalid Interval
Invalid Log Name
Invalid MONLEV Value
Invalid MONTYPE Value
Invalid Mac Address
Invalid Next Hop
Invalid Notification Code
Invalid PM Interval
Invalid PPM Port
Invalid Protid
|
Invalid Reference
Invalid Regen Group AID
Invalid Report Interval
Invalid Start Time
Invalid TAP Number
Invalid TXCOUNT Or RXCOUNT
Invalid TXCOUNT Or RXCOUNT
Invalid TXCOUNT
Invalid Time Offset
Invalid Trace Level
Invalid User Name
Invalid VCAT Group Name
Keyword All Not Allowed
Line Code Not Supported
OSRI Not Supported
PPM Does Not Exist
Rate Capacity Exceeded
SDCC is in use
TMPER Type Not Supported
Tap Out Of Range
Trace Level Required
VOA Not Supported
VOA Out Of Range
Value Or Threshold Read Only
|
IDRG
|
Difference Value Range Error
Invalid DURAL Value
Invalid MXINV Value
Invalid PAGE Value
Invalid PCND Value
Invalid PINT Value
Invalid PJMON Value
|
Invalid POLD Value
Invalid TMOUT Value
Invalid Threshold Value
Invalid UOUT Value
Invalid Watermark Value
PJMON Out Of Range
|
IIAC
|
AID PARSE ERROR
ALL AID Not Allowed
Bad Ring Id
DS1 Out of Range
FAC parse failed
Incorrect Card Type
Input, Invalid Access
Invalid AID
Invalid DRI Node Type
Invalid DRI Topology
Invalid DS1 AID
Invalid FROM= AID
Invalid Month Or Day
Invalid Node Side
Invalid NodeId
|
Invalid PJMON Value
Invalid Protect AID
Invalid RTO AID
Invalid Reference
Invalid RingId
Invalid Source AID
Invalid TAPI
Invalid TO= AID
Invalid TPORT AID
Invalid Time
Invalid VCG Member Number
Invalid Year
Invalid fac-n-m input
Loopback type mismatch
Multiple AIDs Not Allowed
|
IICM
|
Input, Invalid Command
Input, Invalid MOD1
Input, Invalid MOD2
Input, Invalid MOD2
Input, Invalid VERB
|
|
IICT
|
Invalid Correlation Tag
|
|
IIDT
|
CMDMDE Must Be FRCD
Duplicate Schedule
FRCD mode not supported
FTTD URL Missing
File Name Missing In URL
Flash Manager Not Active
Hostname Missing In URL
IOS Config File Too Big
Invalid Data Parameter
Invalid East work Port
Invalid FTTD Host
Invalid NSAP Character
Invalid NSAP Length
|
Invalid Phase Number
Invalid Port In URL
Invalid Revertive Time
Invalid State Value
Invalid West work Port
Memory Out Of Range
Missing/Invalid Source
Password Missing In URL
Port Missing In URL
SRC Required For RFR Type
Unsupported Locn Value
Username Missing In URL
ftp:// Missing In FTP URL
|
IIFM
|
Invalid Data Format
Invalid Password
Invalid User ID
|
|
IISP
|
Input, Garbage
|
|
INUP
|
General Block Unsupported
|
|
IPEX
|
Duplicate N/V field
|
|
IPMS
|
Invalid syntax
|
|
IPNC
|
Description Too Long
Invalid Encapsulation Type
Invalid Flow Control Value
Invalid Maximum Frame Size
Invalid Parameter
Invalid Trans Value
Parameter Not Valid
Parameters Not Compatible
|
|
IPNV
|
Bad Parameter
Bad Reference
Empty parameter
INVALID SAMPLE TYPE
Internal-Ip Lookup Failed
Invalid BITS Framing
Invalid BITS-OUT Rate
Invalid Clock Source
Invalid Condition Type
Invalid DRITYPE
Invalid IIOP Port number
Invalid IP Address
|
Invalid IP Mask
Invalid MONLEV Value
Invalid PM register
Invalid Parameter
Invalid Report Interval
Invalid SNTP Host Address
Invalid Start Time
Invalid Switch Type
Invalid Threshold Value
Invalid why parameter
PM Not Supported
Parameter Not Valid
|
NO
|
No error
|
|
PICC
|
AID Required
Can't login
Logout failed
Password Recently Changed
Unexpected Default Case
Unknown User
User Already Exists
User Not Authorized
User Password Required
|
|
PIMA
|
Memory Out Of Range
|
|
PIUC
|
Unauthorized
User Is Not Superuser
User Not Logged In
|
|
RALB
|
Requested DCC In Use
|
|
RRNG
|
Invalid Slot Number
|
|
RTBY
|
Connection In Service
TAP Already In Use
TAP Number In Use
|
|
RTEN
|
Cannot Set Access Mode
Invalid Access Mode
Invalid TAP AID
Invalid TAP Mode
Invalid TAP Number
Requested Tap Busy
TAP Not Found
|
|
SAAL
|
Already Allowed
|
|
SADC
|
GNE: ENE is down
TAP Not Connected
|
|
SAIN
|
Already Inhibited
|
|
SAIS
|
Port Already In Service
|
|
SAOP
|
Control Already Operated
Control Already Released
|
|
SAOS
|
Port Already Out Of Service
|
|
SCAT
|
Connection is tapped
Test Access Busy
|
|
SDBE
|
AID Parser Failed
Bad Parameter
Cannot Access Alarms
Cannot Access Conditions
Cannot Access Controls
Cannot Access Date/Time
Cannot Access Equipment
Cannot Access Facility
Cannot Access Interface
Cannot Access Node ID
Cannot Access Node Name
Cannot Access Object
Cannot Access Orderwire
Cannot Access SNTP Host
Cannot Access Timezone
Cannot Configure SYNC
Cannot Set Date
Cannot Set Node Name
Cannot Set Timezone
DLT prg Failed
Equipment Not Found
Facility Does Not Exist
Facility Is Not Provisioned
File Transfer In Progress
|
IP Configuration Failed
Incorrect Facility Type
Internal Access Failed
Internal Data Base Error
Internal Database Error
Invalid Command
Invalid DCC
Invalid Mondat Format
Invalid Montm Format
Invalid Protection Group
Invalid Time Period
Location Value Invalid
Loopback Is Invalid
Loopback Port In Service
No such interface
Not a Sonet interface
Object Not Provisioned
Object Not Supported
Path Width Not Supported
Wrong Facility Type
Wrong Interface Type
bind failed for sonet gen
getRefSources failed
|
SDLD
|
Duplex Unit Locked
|
|
SDNA
|
Active TCC Not Ready
Standby TCC Not Ready
|
|
SDNR
|
Data Not Ready
|
|
SNCN
|
Bad Quality
Command Not Implemented
Invalid Clock Source
|
|
SNPR
|
Cannot Get Role Of Port
Get Port Role Failed
|
|
SNVS
|
CCAT Cross Connect Exists
Cannot END an AUTO roll
Cross Connect Exists
Invalid AINS Soak Time
Invalid Admin State
Invalid Clock Source
Invalid Equipment State
|
Loopback Not In Progress
No Switch In Progress
No loopback in progress
No valid roll signal
Protection Unit Active
VCG Already Created
Working Unit Already Active
|
SOSE
|
Unrecognized Message Type
|
|
SPLD
|
Cannot Delete Equipment
Equipment In Use
FTP Task Is Busy
Facility Is Busy
Protection Unit Locked
|
|
SRAC
|
Invalid Connection Type
|
|
SROF
|
1WAYMON not supported
APC System Is Busy
All DCCs In Use
CKTID Does Not Match
Cannot Access Alarm Log
Cannot Access DCC
Cannot Access Facility
Cannot Access PM Mode
Cannot Access TAP
Cannot Add Equipment
Cannot Add Equipment
Cannot Configure SYNC
Cannot Create TAP
Cannot Delete Last Drop
Cannot Delete VCAT Group
Cannot Edit Ethernet IP
Cannot Perform ACO
Cannot Provision Equipment
Cannot Set ALS Mode
Cannot Set NodeId
|
Cannot Set Payload Type
Cannot Set RingId
Cannot Set Wave Length
Cannot set loopback
Command Not Supported
Connection In Loopback
Connection In Roll
Connection type error
Connection type error
Could Not Delete Protection
DCC Does Not Exist
DCC In Use DCC Not In Use
DWRAP Not Enabled
Database Is Busy
Element Not Found
Element not available
Facility Not Protected
Fail to add RTO
Flash Is Busy
Get IOR Failed
|
SROF (continued)
|
Internal Database Error
Internal Exercise Failure
Invalid AID
Invalid BLSR DRI Drop
Invalid Drop Path
Invalid Path
Invalid Protection Group
Invalid RMODE
Invalid SYNC entity
Invalid Subnet Mask
Invalid Username/Password
Is Not 1+1 Element Type
MIC Cards Cannot Be Reset
Maximum User Limit Reached
No Path To Regulate
No Start-Up IOS Config
Operation Not Supported
Path Already In Use
Path Specified Is Not Valid
Path Used For Test Access
Pool Does Not Exist
Pool not available
Port Type Mismatch
Port Type Not Provisioned
|
Protect Port Active
Provisioning Rules Failed
Requested Operation Failed
Requested Tap Busy
Ring Reversion Failed
SDBER Out Of Range
SDCC creation failed
SFBER Out Of Range
Set PRG Name Failed
Software Activation Failed
Software Download Failed
Software Error
Software Reversion Failed
Span Reversion Failed
TAP connected
Tap Not Provisioned
Test Access Active
Trace Mode Not Supported
Trap Table Full
Unable to cancel roll
Unknown Internal Error
VCG Does Not Exist
XC Card Not Present
|
SRQN
|
DCC not enabled
Invalid Request
SDH Not Allowed With DCC
SDH Not Allowed
|
|
SRTN
|
TAP Not Found
|
|
SSRD
|
Switch Request Denied
|
|
SSRE
|
Memory Resources Exceeded
Memory resource denial
|
|
SWLD
|
Working Unit Locked
|
|
Feedback