Cisco ONS SONET TL1 Command Guide, Release 5.0
Chapter 4, TL1 Command Components
Downloads: This chapterpdf (PDF - 633.0KB) The complete bookPDF (PDF - 9.12MB) | Feedback

TL1 Command Components

Table Of Contents

TL1 Command Components

4.1  TL1 Default Values

4.1.1  BLSR

4.1.2  Cross Connections

4.1.3  Environment Alarms and Controls

4.1.4  Equipment

4.1.5  Performance

4.1.6  Ports

4.1.7  SONET Line Protection

4.1.8  STS and VT Paths

4.1.9  Synchronization

4.1.10  Testing

4.2  Modifier Support by Platform

4.3  Starting Positions for an STS-Mc SPE

4.4  Conditions

4.5  Access Identifiers

4.5.1  ALL

4.5.2  AidUnionId

4.5.3  AidUnionId1

4.5.4  BAND

4.5.5  BITS

4.5.6  BLSR

4.5.7  CHANNEL

4.5.8  COM

4.5.9  CrossConnectId

4.5.10  CrossConnectId1

4.5.11  DS1

4.5.12  ENV

4.5.13  EQPT

4.5.14  FACILITY

4.5.15  IPADDR

4.5.16  LINE

4.5.17  LNKTERM

4.5.18  OPM

4.5.19  OSC

4.5.20  PRSLOT

4.5.21  RFILE

4.5.22  STS

4.5.23  SYN

4.5.24  SYN_SRC

4.5.25  SYNC_REF

4.5.26  SYNCSW

4.5.27  UDC

4.5.28  VT

4.5.29  WDMANS

4.5.30  WLEN

4.6  Parameter Types

4.6.1  ATAG Description

4.6.2  CTAG Description

4.6.3  TID Description

4.6.4  Parameter Notes


TL1 Command Components



Note The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.


This chapter describes the components of TL1 commands and autonomous messages for the
Cisco ONS 15454, 15327, 15600, 15310-CL, Release 5.0, including:

TL1 default values

Modifier support by platform

Starting positions for an STS-Mc SPE

Access identifiers (AIDs)

Parameter Notes

4.1  TL1 Default Values

4.1.1  BLSR

Table 4-1 BLSR Default Values

BLSR
Default

RVRTV

Y

RVTM

5.0 minutes

SRVRTV

Y

SRVTM

5.0 minutes


4.1.2  Cross Connections

Table 4-2 Cross Connections Default Values

Cross Connections
Default

CCT

2WAY for both STSp and VT1 cross-connections


4.1.3  Environment Alarms and Controls

Table 4-3 Environment Alarms and Controls Default Values 

Environment Alarms and Controls
Default

OPR-EXT-CONT

CONTTYPE is set as one provisioned in the respective AID, there is not default for it. It is only used as a filter if entered. DUR is always taken as CONT.

RTRV-ATTR-CONT

There is no default for CONTTYPE. It is only used as a filter if entered.

RTRV-ATTR-ENV

There is no default for both NTFCNCDE and ALMTYPE, which are only used as filters if entered.

RTRV-EXT-CONT

CONTTYPE defaults to the conttype associated with the AID.

SET-ATTR-ENV

NTFCNCDE defaults to NR. ALMTYPE defaults to NULL. ALMMSG defaults to \"Env Alarm Input 1\".


4.1.4  Equipment

Table 4-4 Equipment Default Values 

Equipment
Default

ALW-SWTOPROTN-EQPT, INH-SWTOPROTN-EQPT and ALW-SWTOWKG-EQPT, ING-SWTOWKG-EQPT

DIRN defaults to BTH

ENT-EQPT

PROTID, PRTYPE, RVRTV and RVTM defaults to NULL

SW-DX-EQPT

MODE defaults to NORM

SW-TOPROTN-EQPT and
SW-TOWKG-EQPT

MODE defaults to NORM
DIRN defaults to BTH


4.1.5  Performance

Table 4-5 Performance Default Values 

Performance
Default

INIT-REG-<MOD2>

LOCN defaults to NEND (near end)

RTRV-PM-<MOD2>

LOCN defaults to NEND
TMPER defaults to 15 minutes

RTRV-TH-<MOD2>

MONTYPE defaults to CVL for OCN, EC1, and DSN
MONTYPE defaults to ESP for STSp
MONTYPE defaults to UASV for VT1
MONTYPE defaults to AISSP for the DS1 layer of the DS3XM card
LOCN defaults to NEND
TMPER defaults to 15 minutes

SET-PMMODE-<STS_PATH>

PMSTATE defaults to ON

SET-TH-<MOD2>

LOCN defaults to NEND
TMPER defaults to 15 minutes


4.1.6  Ports

Table 4-6 Ports Default Values 

Ports
Default

OCN Line

DCC defaults to N
TMGREF defaults to N
SYNCMSG defaults to Y
SENDDUS defaults to N
PJMON defaults to 0
SFBER defaults to 1E-4
SDBER defaults to 1E-7
MODE defaults to SONET
PST defaults to OOS

EC1 Line

PJMON defaults to 0 (zero)
LBO defaults to 0-225
RXEQUAL is Y
PST defaults to defaults to OOS

T1 Line (DS1/DS1N)

LINECDE defaults to AMI
FMT defaults to D4
LBO defaults to 0-133
PST defaults to OOS

T3 Line (DS3, DS3E, DS3NE, DS3XM)

DS3/T3 LINECDE defaults to 0-225
DS3 PST defaults to OOS
DS3E/DS3NE FMT defaults to UNFRAMED
DS3E/DS3NE LINECDE defaults to B3ZS
DS3E/DS3NE LBO defaults to 0-225
DS3 of DS3XM PST defaults to OOS


4.1.7  SONET Line Protection

Table 4-7 SONET Line Protection Default Values 

SONET Line Protection
Default

EX-SW-<OCN>

ST (switch type) is optional and for BLSR protection switch only
ST defaults to BLSR RING switch type

OCN Line Protection

PROTID defaults to the protecting port of the protection group (SLOT-#(OCN)PORT-#). It is a string that can have a maximum length of 32 characters
RVRTV defaults to N (non-revertive mode)
RVTM defaults to 5.0 minutes
PSDIRN defaults to UNI

OPR-PROTNSW-<OCN>

ST (switch type) is optional and for BLSR protection switch only
ST defaults to BLSR RING switch type


4.1.8  STS and VT Paths

Table 4-8 STS and VT Paths Default Values 

STS and VT Paths
Default

STS Path

SFBER, SDBER, RVRTV, and RVTM apply to path protection STS paths only
SFBER defaults to 1E-4
SDBER defaults to 1E-6
RVRTV defaults to N
RVTM defaults to empty because RVRTV is N when path protection STSp is created

J1 is implemented on DS1, DS1N, DS3, DS3E, DS3NE, DS3XM, EC1, OC3, OC48AS AND OC192 cards
TRCMODE defaults to the OFF mode

EXPTRC defaults to a copy of the provisioned string or NULL when TRCMODE is OFF mode
EXPTRC defaults to the user entered string when the TRCMODE is MANUAL mode
EXPTRC defaults to a copy of the acquired received string or NULL if the string has not been acquired when the TRCMODE is AUTO mode

INCTRC defaults to the incoming string (NULL) when the TRCMODE is under OFF mode
INCTRC defaults to a copy of the received string or NULL if the string has not been received when the TRCMODE is under MANUAL or AUTO mode

VT Path

RVRTV, RVTM apply to path protection VT paths only
RVRTV defaults to N
RVTM defaults to empty because RVRTV is N when path protection VT1 is created


4.1.9  Synchronization

Table 4-9 Synchronization Default Values 

Synchronization
Default

BITS

LINECDE defaults to B8ZS
FMT defaults to ESF
SYNCMSG defaults to Y
PST defaults to OOS

NE-SYNCN

TMMDE defaults to EXTERNAL
SSMGEN defaults to GEN1
QRES defaults to SAME-AS-DUS
RVRTV defaults to Y
RVTM defaults to 5.0 minutes

SYNCN

PRI/SEC QREF defaults to PRS
PRI STATUS defaults to ACT
SEC STATUS defaults to STBY
THIRD QREF defaults to ST3
STATUS defaults to STBY


4.1.10  Testing

Table 4-10 Testing Default Values 

Testing
Default

OPR-LPBK

LPBKTYPE defaults to FACILITY

RLS-LPBK

LPBKTYPE defaults to current existing loopback type


4.2  Modifier Support by Platform

Table 4-11 details the TL1 modifiers supported on the ONS SONET 15454, 15327, 15310-CL, and 15600 for commands that have carets (< >) in part of their input format; for example, RTRV-<OCN_TYPE>. A "Yes" in the platform column indicates that a particular modifier is supported in that platform. A "No" in the platform column indicates that a particular modifier is not supported in that platform. A "—" indicates that a particular modifier is not applicable to that platform.

Table 4-11 Modifier Support 

Modifier
ONS 15454
ONS 15327
ONS 15310-CL
ONS 15600

DS1

Yes

EC1

Yes

Yes

T1

Yes

Yes

Yes

T3

Yes

Yes

Yes

VT1

Yes

Yes

Yes

STS1

Yes

Yes

Yes

Yes

STS3C

Yes

Yes

Yes

Yes

STS6C

Yes

Yes

Yes

No

STS9C

Yes

Yes

Yes

No

STS12C

Yes

Yes

Yes

Yes

STS24C

Yes

Yes

No

No

STS48C

Yes

Yes

No

Yes

STS192C

Yes

No

No

Yes

OC3

Yes

Yes

Yes

OC12

Yes

Yes

Yes

OC48

Yes

Yes

No

Yes

OC192

Yes

No

No

Yes

G1000

Yes

Yes

No

GIGE

Yes

No

No

FSTE

Yes

No

Yes

POS

Yes

No

Yes

E100

Yes

Yes

No

E1000

Yes

Yes

No

CLNT

Yes

No

No

OCH

Yes

No

No

OMS

No

OTS

No


4.3  Starting Positions for an STS-Mc SPE

Table 4-12, Table 4-13, and Table 4-14 list possible starting positions for the ONS 15454, ONS 15327, ONS 15310-CL and ONS 15600 STS-Mc SPE. In each of the tables a "Y" indicates "Yes, this position is supported" and an "N" indicates, "No, this position is not supported". More information about the generic NE support requirement can be found in GR-253-CORE: Synchronous Optical Network (SONET) Transport Systems: Common Generic Criteria.

Table 4-12 Starting Positions for an STS-Mc SPE in an OC-12 Signal 

STS-1 Number
STS-3c SPE
STS-6c SPE
STS-9c SPE
STS-12c SPE

1

Y

Y

Y

Y

4

Y

Y

Y

N

7

Y

Y

N

N

10

Y

N

Y

N


Table 4-13 Starting Positions for an STS-Mc SPE in an OC-48 Signal 

STS-1 Number
STS-3c SPE
STS-6c SPE
STS-9c SPE
STS-12c SPE
STS-24c SPE
STS-48c SPE

1

Y

Y

Y

Y

Y

Y

4

Y

Y

Y

N

Y

N

7

Y

Y

N

N

Y

N

10

Y

N

Y

N

Y

N

13

Y

Y

Y

Y

Y

N

16

Y

Y

Y

N

Y

N

19

Y

Y

Y

N

Y

N

22

Y

N

N

N

Y

N

25

Y

Y

Y

Y

Y

N

28

Y

Y

Y

N

N

N

31

Y

Y

N

N

N

N

34

Y

N

N

N

N

N

37

Y

Y

Y

Y

N

N

40

Y

Y

Y

N

N

N

43

Y

Y

N

N

N

N

46

Y

N

Y

N

N

N


Table 4-14 Starting positions for an STS-Mc SPE in an OC-192 Signal 

STS-1 Number
STS-3c SPE
STS-6c SPE
STS-9c SPE
STS-12c SPE
STS-24c SPE
STS-48c SPE
STS-192c SPE

1

Y

Y

Y

Y

Y

Y

Y

4

Y

Y

Y

N

N

N

N

7

Y

Y

N

N

N

N

N

10

Y

N

Y

N

N

N

N

13

Y

Y

Y

Y

N

N

N

16

Y

Y

Y

N

N

N

N

19

Y

Y

Y

N

N

N

N

22

Y

N

N

N

N

N

N

25

Y

Y

Y

Y

N

N

N

28

Y

Y

Y

N

N

N

N

31

Y

Y

N

N

N

N

N

34

Y

N

N

N

N

N

N

37

Y

Y

Y

Y

N

N

N

40

Y

Y

Y

N

N

N

N

43

Y

Y

N

N

N

N

N

46

Y

N

Y

N

N

N

N

49

Y

Y

Y

Y

Y

Y

N

52

Y

Y

Y

N

N

N

N

55

Y

Y

Y

N

N

N

N

58

Y

N

N

N

N

N

N

61

Y

Y

Y

Y

N

N

N

64

Y

Y

Y

N

N

N

N

67

Y

Y

N

N

N

N

N

70

Y

N

N

N

N

N

N

73

Y

Y

Y

Y

N

N

N

76

Y

Y

Y

N

N

N

N

79

Y

Y

N

N

N

N

N

82

Y

N

Y

N

N

N

N

85

Y

Y

Y

Y

N

N

N

88

Y

Y

Y

N

N

N

N

91

Y

Y

Y

N

N

N

N

94

Y

N

N

N

N

N

N

97

Y

Y

Y

Y

Y

Y

N

100

Y

Y

Y

N

N

N

N

103

Y

Y

N

N

N

N

N

106

Y

N

N

N

N

N

N

109

Y

Y

Y

Y

N

N

N

112

Y

Y

Y

N

N

N

N

115

Y

Y

N

N

N

N

N

118

Y

N

Y

N

N

N

N

121

Y

Y

Y

Y

N

N

N

124

Y

Y

Y

N

N

N

N

127

Y

Y

Y

N

N

N

N

130

Y

N

N

N

N

N

N

133

Y

Y

Y

Y

N

N

N

136

Y

Y

Y

N

N

N

N

139

Y

Y

N

N

N

N

N

142

Y

N

N

N

N

Y

N

145

Y

Y

Y

Y

Y

N

N

148

Y

Y

Y

N

N

N

N

151

Y

Y

N

N

N

N

N

154

Y

N

Y

N

N

N

N

157

Y

Y

Y

Y

N

N

N

160

Y

Y

Y

N

N

N

N

163

Y

Y

Y

N

N

N

N

166

Y

N

N

N

N

N

N

169

Y

Y

Y

Y

N

N

N

172

Y

Y

Y

N

N

N

N

175

Y

Y

N

N

N

N

N

178

Y

N

N

N

N

N

N

181

Y

Y

Y

Y

N

N

N

184

Y

Y

Y

N

N

N

N

187

Y

Y

N

N

N

N

N

190

Y

N

Y

N

N

N

N


4.4  Conditions

Conditions include any problem detected on an ONS 15454, 15327, 15310-CL, and 15600 shelf. They can include standing or transient, notifications. A snapshot of all current raised, standing conditions on the network, node, or card can be retrieved in the CTC Conditions window or using the RTRV-COND commands. (In addition, some but not all cleared conditions are also found in the History tab.)

Table 4-15 Conditions 

Condition
Description

AIS

Alarm Indication Signal

AIS-L

Alarm Indication Signal - Line

AIS-P

Alarm Indication Signal - Path

AIS-V

Alarm Indication Signal - VT

ALS

Automatic Laser Shutdown

APC-DISABLED

Automatic Power Control Disabled

APC-FAIL

Automatic Power Control Failure

APSB

Byte Failure

APSC-IMP

Improper APS Code

APSCDFLTK

Default K Byte

APSCINCON

Inconsistent APS Code

APSCM

Protection Switching Channel Match Failure

APSCNMIS

Node Id Mismatch

APSIMP

APS Invalid Mode

APSMM

Automatic Protection Switch Mode Mismatch

AS-CMD

Alarms Suppressed By User Command

AS-MT

Alarms Suppressed For Maintenance

AU-LOF

LOF - Administration Unit - Loss of Multi Frame

AUD-LOG-LOSS

Audit Log 100 Percent Full - Oldest records will be lost

AUD-LOG-LOW

Audit Log 80 Percent Full

AUTOLSROFF

Automatic Laser Shutoff Due To High Temperature

AUTORESET

Automatic System Reset

AUTOSW-AIS

Automatic path protection Switch Caused By AIS

AUTOSW-LOP

Automatic path protection Switch Caused By LOP

AUTOSW-PDI

Automatic path protection Switch Caused By PDI

AUTOSW-SDBER

Automatic path protection Switch Caused By SDBER

AUTOSW-SFBER

Automatic path protection Switch Caused By SFBER

AUTOSW-UNEQ

Automatic path protection Switch Caused By UNEQ

BAT-FAIL

Battery Failure

BKUPMEMP

Primary Non-Volatile Backup Memory Failure

BLSROSYNC

BLSR Out Of Sync

CARLOSS

Carrier Loss On The LAN

CKTDOWN

Signaling Unable to setup circuit

CLDRESTART

Cold Restart

COMIOXC

IO Slot To XCON Communication Failure

COMM-FAIL

Plug-in Module Communication Failure

CONTBUS-A-18

TCC A To DCC A Processor Communication Failure

CONTBUS-B-18

TCC B To DCC B Processor Communication Failure

CONTBUS_A

Controller A To Shelf Slot Communication Failure

CONTBUS_B

Controller B To Shelf Slot Communication Failure

CTNEQPT-MISMATCH

Connection Equipment Mismatch

CTNEQPT-PBPROT

Interconnection Equipment Failure - Protect XC Payload Bus

CTNEQPT-PBWORK

Interconnection Equipment Failure - Working XC Payload Bus

DATAFLT

Software Fault - Data Integrity Fault

DBOSYNC

Standby Database Out of Sync

DS3-MISM

DS3 Frame Format Mismatch

DSP-COMM-FAIL

DSP Communication Failure

DSP-FAIL

DSP Failure

DUP-IPADDR

IP address already in use within the same DCC Area

DUP-NODENAME

Node name already in use within the same DCC Area

E-W-MISMATCH

Both Ends Of Fiber Provisioned As East Or Both As West

EHIBATVG

Extreme High Volt

ELWBATVG

Extreme Low Volt

EOC

SDCC Termination Failure

EOC-L

Line DCC Termination Failure

EQPT

Equipment Failure

EQPT-MISS

Replaceable Equipment/Unit is Missing

ERFI-P-CONN

Enhanced Remote Failure Indication - Path - Connectivity

ERFI-P-PAYLD

Enhanced Remote Failure Indication - Path - Payload

ERFI-P-SRVR

Enhanced Remote Failure Indication - Path - Server

ERROR-CONFIG

Error in Startup Config

ETH-LINKLOSS

Rear Panel Ethernet Link Removed

EXCCOL

Excess Collisions On The LAN

EXERCISE-RING-FAIL

Exercise Request on Ring Failed

EXERCISE-RING-REQ

Exercise Request on Ring

EXERCISE-SPAN-FAIL

Exercise Request on Span Failed

EXERCISE-SPAN-REQ

Exercise Request on Span

EXT

Failure Detected External To The NE

EXTRA-TRAF-PREEMPT

Extra Traffic Preempted

FAILTOSW

Failure To Switch To Protection

FAILTOSW-PATH

Failure To Switch To Protection - Path

FAILTOSWR

Failure To Switch To Protection - Ring

FAILTOSWS

Failure To Switch To Protection - Span

FAN

Fan Failure

FANDEGRADE

Partial Fan Failure

FE-AIS

Far End AIS

FE-DS1-MULTLOS

Far End Multiple DS1 LOS Detected On DS3

FE-DS1-NSA

Far End DS1 Equipment Failure - Non Service Affecting

FE-DS1-SA

Far End DS1 Equipment Failure - Service Affecting

FE-DS1-SNGLLOS

Far End Single DS1 LOS

FE-DS3-NSA

Far End DS3 Equipment Failure - Non Service Affecting

FE-DS3-SA

Far End DS3 Equipment Failure - Service Affecting

FE-EQPT-NSA

Far End Common Equipment Failure - Non Service Affecting

FE-EXERCISING-RING

Far End Exercising Ring

FE-EXERCISING-SPAN

Far End Exercising Span

FE-FRCDWKSWPR-RING

Far End Working Facility Forced To Switch To Protection - Ring

FE-FRCDWKSWPR-SPAN

Far End Working Facility Forced To Switch To Protection - Span

FE-IDLE

Far End IDLE

FE-LOCKOUTOFPR-SPAN

Far End Lockout Of Protection - Span

FE-LOF

Far End LOF

FE-LOS

Far End LOS

FE-MANWKSWPR-RING

Far End Manual Switch Of Working Facility To Protection - Ring

FE-MANWKSWPR-SPAN

Far End Manual Switch Of Working Facility To Protection - Span

FEC-MISM

FEC Mismatch

FEPRLF

Far End Protection Line Failure

FORCED-REQ

Forced Switch Request

FORCED-REQ-RING

Forced Switch Request On Ring

FORCED-REQ-SPAN

Forced Switch Request On Span

FRCDSWTOINT

Forced Switch To Internal Clock

FRCDSWTOPRI

Forced Switch To Primary Reference

FRCDSWTOSEC

Forced Switch To Second Reference

FRCDSWTOTHIRD

Forced Switch To Third Reference

FRNGSYNC

Free Running Synchronization Mode

FSTSYNC

Fast Start Synchronization Mode

FULLPASSTHR-BI

Bidirectional Full Pass Through Is Active

GCC-EOC

GCC Termination Failure

GE-OOSYNC

GigaBit Ethernet Out of Sync

HI-LASERBIAS

Equipment High Laser Bias

HI-RXPOWER

Equipment High Rx power

HI-TXPOWER

Equipment High Tx power

HIBATVG

High Volt

HITEMP

High Temperature

HLDOVRSYNC

Holdover Synchronization Mode

I-HITEMP

Industrial High Temperature

IMPROPRMVL

Improper Removal

INC-GFP-OUTOFFRAME

Out Of Frame Detected by GFP Receiver

INC-GFP-SIGLOSS

Client Signal Loss Frames Detected by GFP Receiver

INC-ISD

DS3 Idle Condition

INC-SIGLOSS

Incoming Signal Loss on Fibre Channel Interface

INC-SYNCLOSS

Incoming Synchronization Loss on Fibre Channel Interface

INC_GFP_SYNCLOSS

Client Synchronization Loss Frames Detected by GFP Receiver

INHSWPR

Inhibit Switch To Protect Request On Equipment

INHSWWKG

Inhibit Switch To Working Request On Equipment

INTRUSION-PSWD

Security Intrusion Attempt Detected - See Audit Log

INVMACADR

Invalid MAC Address

IOSCFGCOPY

Ios Config Copy In Progress

KB-PASSTHR

K Bytes Pass Through Is Active

KBYTE-APS-CHANNEL-FAILURE

Kbyte Channel Failure

LAN-POL-REV

Lan Connection Polarity Reversed

LASEREOL

Laser Approaching End of Life

LKOUTPR-S

Lockout Of Protection - Span

LMP-HELLODOWN

LMP Hello FSM to Control Channel down

LMP-NDFAIL

LMP Neighbor Discovery has failed

LO-RXPOWER

Equipment Low Rx power

LO-TXPOWER

Equipment Low Tx power

LOA

Loss of Alignment

LOC

Loss of Channel

LOCKOUT-REQ

Lockout Switch Request On Facility or Equipment

LOCKOUT-REQ-RING

Lockout Switch Request On Ring

LOF

Loss Of Frame

LOM

Loss of Multi-Frame

LOP-P

Loss Of Pointer - Path

LOP-V

Loss Of Pointer - VT

LOS

Loss Of Signal

LPBKCRS

Cross-connect Loopback

LPBKDS1FEAC

DS1 Loopback Due To FEAC Command

LPBKDS1FEAC-CMD

DS1 Loopback Command Sent To Far End

LPBKDS3FEAC

DS3 Loopback Due To FEAC Command

LPBKDS3FEAC-CMD

DS3 Loopback Command Sent To Far End

LPBKFACILITY

Facility Loopback

LPBKTERMINAL

Terminal Loopback

LWBATVG

Low Volt

MAN-REQ

Manual Switch Request

MANRESET

Manual System Reset

MANSWTOINT

Manual Switch To Internal Clock

MANSWTOPRI

Manual Switch To Primary Reference

MANSWTOSEC

Manual Switch To Second Reference

MANSWTOTHIRD

Manual Switch To Third Reference

MANUAL-REQ-RING

Manual Switch Request On Ring

MANUAL-REQ-SPAN

Manual Switch Request On Span

MEA

Mismatch Of Equipment And Attributes

MEM-GONE

Free Memory On Card Near Zero

MEM-LOW

Free Memory On Card Very Low

MFGMEM

Manufacturing Data Memory (EEPROM Failure

NO-CONFIG

No Startup Config

NTWTPINC

Network Topology Incomplete

OCHNC-ACTIV-FAIL

Optical Channel Activation Failure

OCHNC-DEACTIV-FAIL

Optical Channel De-Activation Failure

OCHNC-FAIL

Optical Channel Connection Failure

OCHNC-INC

Optical Channel Incomplete

ODUK-AIS-PM

ODUk: Alarm Indication Signal

ODUK-BDI-PM

ODUk: PM Backward Defect Indication

ODUK-LCK-PM

ODUk: Locked Defect - PM

ODUK-OCI-PM

ODUk: Open Connection Indication

ODUK-SD-PM

ODUk: Signal Degrade

ODUK-SF-PM

ODUk: Signal Failure

ODUK-TIM-PM

ODUk: Trail Trace Identifier Mismatch

OOU-TPT

Out of Use - Transport Failure

OPTNTWMIS

Optical Network Type Mismatch

OTUK-AIS

OTUk: Alarm Indication Signal

OTUK-BDI

OTUk: Backward Defect Indication

OTUK-LOF

OTUk: Loss Of Frame

OTUK-SD

OTUk: Signal Degrade

OTUK-SF

OTUk: Signal Failure

OTUK-TIM

OTUk: Trail Trace Identifier Mismatch

OUT-OF-SYNC

8B10B Out of Sync

PDI-P

Payload Defect Indication - Path

PEER-NORESPONSE

Peer Card Not Responding

PLM-P

Payload Label Mismatch - Path

PLM-V

Signal Label Mismatch Failure - Payload Label Mismatch - VT

PORT-CODE-MISM

Pluggable Port security code mismatch

PORT-COMM-FAIL

Module Communication Failure

PORT-MISMATCH

Pluggable Port rate mismatch

PORT-MISSING

Pluggable Port missing

PRC-DUPID

Duplicate Node ID

PROTNA

Protection Unit Not Available

PTIM

Payload Type Identifier Mismatch

PWR-REDUN

Redundant Power Capability Lost

RAI

Remote Alarm Indication

RCVR-MISS

Facility Termination Equipment - Receiver Missing

RFI

Remote Failure Indication

RFI-L

Remote Failure Indication - Line

RFI-P

One-Bit Remote Failure Indication - Path

RFI-V

Remote Failure Indication - VT

RING-ID-MIS

Ring Id Mismatch

RING-MISMATCH

Far End Of Fiber Is Provisioned With Different Ring ID

RING-SW-EAST

Ring Switch Is Active On The East Side

RING-SW-WEST

Ring Switch Is Active On The West Side

RSVP-HELLODOWN

RSVP Hello FSM to Neighbor down

RUNCFG-SAVENEED

Need to Save Running Config

SD

Signal Degrade

SD-L

BER Threshold Exceeded For Signal Degrade - Line

SD-P

BER Threshold Exceeded For Signal Degrade - Path

SF

Signal Failure

SF-L

BER Threshold Exceeded For Signal Failure - Line

SF-P

BER Threshold Exceeded For Signal Failure - Path

SFTWDOWN

Software Download In Progress

SNTP-HOST

SNTP Host Failure

SPAN-SW-EAST

Span Switch Is Active On The East Side

SPAN-SW-WEST

Span Switch Is Active On The West Side

SQM

Sequence Mismatch

SQUELCH

Ring Is Squelching Traffic

SQUELCHED

Equipment Squelched

SSM-DUS

Do Not Use For Synchronization

SSM-FAIL

Failed To Receive Synchronization Status Message

SSM-LNC

G812 - Local Node Clock traceable

SSM-OFF

Synchronization Status Messages Are Disabled On This Interface

SSM-PRC

G811 - Primary Reference Clock traceable

SSM-PRS

Stratum 1 Primary Reference Source Traceable

SSM-RES

Reserved For Network Synchronization Use

SSM-SDH-TN

G812 - Transit Node Clock traceable

SSM-SETS

G813 - Synchronous Equipment Timing Source traceable

SSM-SMC

SONET Minimum Clock Traceable

SSM-ST2

Stratum 2 Traceable

SSM-ST3

Stratum 3 Traceable

SSM-ST3E

Stratum 3E Traceable

SSM-ST4

Stratum 4 Traceable

SSM-STU

Synchronized - Traceability Unknown

SSM-TNC

Transit Node Clock Traceable

SWMTXMOD

Switching Matrix Module Failure

SWTOPRI

Switch To Primary Reference

SWTOSEC

Switch To Second Reference

SWTOTHIRD

Switch To Third Reference

SYNC-FREQ

Synchronization Reference Frequency Out Of Bounds

SYNCPRI

Primary Synchronization Reference Failure

SYNCSEC

Secondary Synchronization Reference Failure

SYNCTHIRD

Third Synchronization Reference Failure

SYSBOOT

System Reboot

TIM

TIM Section - Trace Identifier Mismatch Failure

TIM-MON

TIM Section Monitor - Trace Identifier Mismatch Failure

TIM-P

STS Path Trace Identifier Mismatch

TPTFAIL

Transport layer failure

TRMT

Transmit Failure

TRMT-MISS

Facility Termination Equipment - Transmitter Missing

TUNDERRUN

Ether tx underrun

TX-AIS

Alarm Indication Signal in TX

TX-RAI

Remote Alarm Indication in TX

UNC-WORD

FEC Uncorrected Word

UNEQ-P

Unequipped - Path

UNEQ-V

Signal Label Mismatch Failure - Unequipped VT

VCG-DEG

VCAT Group Degraded

VCG-DOWN

VCAT Group Down

WKSWPR

Switched To Protection

WTR

Wait To Restore

WVL-MISMATCH

Equipment Wavelength Mismatch


4.5  Access Identifiers

The AID code directs an input command to its intended physical or data entity inside the NE. Equipment modules and facilities are typical examples of entities addressed by the access code. The AIDs in this section apply to the ONS SONET 15454, 15327, 15310-CL, and 15600 except where noted.

4.5.1  ALL

Table 4-16 ALL 

AID
Pattern

AidUnionId

FACILITY

STS

VT

 

AidUnionId1

BLSR

 

BAND

ALL

BAND-{1-6,12-17}-{1-4}-ALL

BAND-{1-6,12-17}-{1-4}-{RX,TX}

BAND-{1-6,12-17}-{1}-ALL

BAND-{1-6,12-17}-{1}-{RX,TX}

 

BITS

ALL

BITS-ALL

BITS-{1,2}

SYNC-BITS {1,2}

 

BLSR

ALL

BLSR-RINGID

 

CHANNEL

ALL

CHAN-{1-6,12-17}-ALL

CHAN-{1-6,12-17}-{1-32}-ALL

CHAN-{1-6,12-17}-{1-32}-{RX,TX}

CHAN-{1-6,12-17}-{1-4}-ALL

CHAN-{1-6,12-17}-{1-4}-{RX,TX}

CHAN-{1-6,12-17}-{2,3}

CHAN-{1-6,12-17}-{2,5}

 

COM

Common

 

CrossConnectId

FACILITY

STS

 

CrossConnectId1

VCM

FACILITY

STS

VT

 

DS1

ALL

DS1-{1-6,12-17}-{1-12,13,15,17,19,21,23,25,27,29,31,33,35}-{1-28}

DS1-{1-6,12-17}-{1-12,13,15,17,19,21,23}-{1-28}

DS1-{1-6,12-17}-{1-6}-{1-28}

ENV

ALL

ENV-IN-ALL

ENV-IN-{1-20}

ENV-IN-{1-32}

ENV-IN-{1-3}

ENV-IN-{1-4}

ENV-IN-{1-6}

ENV-OUT-ALL

ENV-OUT-{1-16}

ENV-OUT-{1-2}

ENV-OUT-{1-4}

ENV-{IN,OUT}-{1-16}

EQPT

AIP

ALL

BIC-ALL

BIC-{A,B}

BP

FAN

PIM-{1-4,11-14}-ALL

PIM-{1-4,11-14}-{1-4}

PPM-1-{1,2}

PPM-2-{1,2}

PPM-{1-4,11-14}-{1-4}-ALL

PPM-{1-4,11-14}-{1-4}-{1-4}

PPM-{1-6,12-17}-{1-4}

PPM-{1-6,12-17}-{1-8}

PWR-ALL

PWR-{A,B}

SLOT-ALL

SLOT-{1-14}

SLOT-{1-17}

SLOT-{1-2}

SLOT-{1-4,11-14}

SLOT-{1-6,12-17}

SLOT-{1-8}

FACILITY

ALL

EC1-{2}-{1-3}

FAC-{1-4,11-14}-ALL

FAC-{1-4,11-14}-{1-16}

FAC-{1-4,11-14}-{1-4}

FAC-{1-4,11-14}-{1-4}-{1-4}-{1}

FAC-{1-4,14-17}-{1-8}

FAC-{1-4}-1

FAC-{1-4}-{1-4}

FAC-{1-6,12-17}-1

FAC-{1-6,12-17}-ALL

FAC-{1-6,12-17}-{0-11}

FAC-{1-6,12-17}-{0-1}

FAC-{1-6,12-17}-{1-12,14,16,18,20,22,24,26,28,30,32,34,36}

FAC-{1-6,12-17}-{1-12,14,16,18,20,22,24}

FAC-{1-6,12-17}-{1-12}

FAC-{1-6,12-17}-{1-4}

FAC-{1-6,12-17}-{1-6}

FAC-{1-6,12-17}-{1}

FAC-{1-6}-ALL

FAC-{5,6,12,13}-{1}

FAC-{5-6}-{1-28}

FAC-{5-6}-{1-3}

FAC-{8,10}-{1}

FSTE-{1}-{0-7}

FSTE-{1}-{1-8}

OC12-{2}-{1-2}-{1}

OC3-{2}-{1-2}-{1}

T1-{2}-{1-21}

T3-{2}-{1-3}

VFAC-{1-4,11-14}-{1-4}-{1-4}-1

VFAC-{1-6,12-17}-{0-1}

VFAC-{1-6,12-17}-{1,2}

VFAC-{1-6,12-17}-{1,2}-{1,8}

VFAC-{1}-{0-1}

VFAC-{1}-{1-8}

LINE

ALL

LINE-{1-6,12-17}-{1-2}-ALL

LINE-{1-6,12-17}-{1-2}-{RX,TX}

LINE-{1-6,12-17}-{1-3}-ALL

LINE-{1-6,12-17}-{1-3}-{RX,TX}

LINE-{8,10}-{1}-ALL

LINE-{8,10}-{1}-{RX,TX}

 

OSC

ALL

OSC-RINGID

 

OPM

OPM-{1-5,12-16}--{1530.33,1531.12,1531.90,1532.68,1534.25,1535.04,1535.82,

1536.61,1538.19,1538.98,1539.77,1540.56,1542.14,1542.94,1543.73,1544.53,

1546.12,1546.92,1547.72,1548.51,1550.12,1550.92,1551.72,1552.52,1554.13,

1554.94,1555.75,1556.55,1558.17,1558.98,1559.79,1560.61}

PRSLOT

NULL

SLOT-1

SLOT-13

SLOT-15

SLOT-17

SLOT-3

SLOT-5

 

RFILE

RFILE-DB

RFILE-PKG

 

STS

ALL

FAC-{1-4,11-14}-{1-4}-{1-4}-{1}

FAC-{1-6,12-17}-{1-4}

STS-{1-4,11-14}-{1-16}-1

STS-{1-4,11-14}-{1-16}-ALL

STS-{1-4,11-14}-{1-16}-{1,13,25,37}

STS-{1-4,11-14}-{1-16}-{1,25}

STS-{1-4,11-14}-{1-16}-{1,4,7,10,-,46}

STS-{1-4,11-14}-{1-4}-1

STS-{1-4,11-14}-{1-4}-ALL

STS-{1-4,11-14}-{1-4}-{1,13,25,37,-,181}

STS-{1-4,11-14}-{1-4}-{1,25,49,73,-,169}

STS-{1-4,11-14}-{1-4}-{1,4,7,10,-,190}

STS-{1-4,11-14}-{1-4}-{1,49,97,145}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,13,25,37}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,25}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4,13,16,25,28,37,40}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4,7}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1-12}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1-3}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1-48}

STS-{1-4,11-14}-{1-4}-{1-192}

STS-{1-4,11-14}-{1-4}-{1-4}-{1}-ALL

STS-{1-4,11-14}-{1-4}-{1-4}-{1}-{1,4,7,13,16,19,25,28,31,43}

STS-{1-4,14-17}-{1-16}-{1-48}

STS-{1-4,14-17}-{1-4}-1

STS-{1-4,14-17}-{1-4}-ALL

STS-{1-4,14-17}-{1-4}-{1,4,7,10}

STS-{1-4,14-17}-{1-4}-{1,4,7}

STS-{1-4,14-17}-{1-4}-{1-3}

STS (continued)

STS-{1-4,14-17}-{1-8}-1

STS-{1-4,14-17}-{1-8}-ALL

STS-{1-4,14-17}-{1-8}-{1-3}

STS-{1-4}-1-1

STS-{1-4}-1-ALL

STS-{1-4}-1-{1,13,25,37}

STS-{1-4}-1-{1,4,7,10,-.,46}

STS-{1-4}-1-{1,4,7,10}

STS-{1-4}-1-{1,7,13,19,-,43}

STS-{1-4}-1-{1,7}

STS-{1-4}-1-{1-12}

STS-{1-4}-1-{1-48}

STS-{1-6,12-17}-1

STS-{1-6,12-17}-1-1

STS-{1-6,12-17}-1-ALL

STS-{1-6,12-17}-1-{1,13,25,37}

STS-{1-6,12-17}-1-{1,4,10,13,16,19,25,28,37,40}

STS-{1-6,12-17}-1-{1,4,7,10,13,16,19,22,25}

STS-{1-6,12-17}-1-{1,4,7,10-46}

STS-{1-6,12-17}-1-{1,4,7,10}

STS-{1-6,12-17}-1-{1,4,7,13,16,19,25,28,37,40,43}

STS-{1-6,12-17}-1-{1,4,7}

STS-{1-6,12-17}-1-{1,4}

STS-{1-6,12-17}-1-{1-12}

STS-{1-6,12-17}-1-{1-48}

STS-{1-6,12-17}-ALL

STS-{1-6,12-17}-{1-12}-1

STS-{1-6,12-17}-{1-24}-1

STS-{1-6,12-17}-{1-36}-1

STS-{1-6,12-17}-{1-4}-1

STS-{1-6,12-17}-{1-4}-ALL

STS-{1-6,12-17}-{1-4}-{1,4,7,10-46}

STS-{1-6,12-17}-{1-4}-{1,4,7}

STS-{1-6,12-17}-{1-4}-{1,4}

STS (continued)

STS-{1-6,12-17}-{1-4}-{1-12}

STS-{1-6,12-17}-{1-6}

STS-{2}-{1-2}-{1}-{1,4,7,10}

STS-{2}-{1-2}-{1}-{1,7}

STS-{2}-{1-2}-{1}-{1-12}

STS-{2}-{1-2}-{1}-{1-3}

STS-{2}-{1-2}-{1}-{1}

STS-{2}-{1-3}-{1}

STS-{2}-{1}

STS-{5,6,12,13}-1-1

STS-{5,6,12,13}-1-{1,13,25,37-180}

STS-{5,6,12,13}-1-{1,13,25,37}

STS-{5,6,12,13}-1-{1,4,7,10,13,16,19,22,25}

STS-{5,6,12,13}-1-{1,4,7,10-190}

STS-{5,6,12,13}-1-{1,4,7,10-46}

STS-{5,6,12,13}-1-{1,4,7,13,16,19,25,28,37,40,43}

STS-{5,6,12,13}-1-{1,49,97,145}

STS-{5,6,12,13}-1-{1-192}

STS-{5,6,12,13}-1-{1-48}

STS-{5,6}-1

STS-{5,6}-{1-4}-1

STS-{5-6}-ALL

VFAC-{1-6,12-17}-{0-1}

SYN

SYNC-NE

 

SYN_SRC

BITS-1

BITS-2

FAC-{1-4,11-14}-{1-16}

FAC-{1-4,11-14}-{1-4}

FAC-{1-4}-1

FAC-{1-4}-{1-4}

FAC-{1-6,12-17}-{1-4}

FAC-{1-6,12-17}-{1}

FAC-{5,6,12,13}-{1}

INTERNAL

NONE

OC12-{2}-{1-2}-{1}

OC3-{2}-{1-2}-{1}

SYNC-NE

T1-{2}-{1-21}

SYNC_REF

ALL

SYNC-ALL

SYNC-NE

SYNC-{BITS1,BITS2}

 

SYNCSW

INT

PRI

SEC

THIRD

 

UDC

ALL

UDC-{F,DCC}-{A,B}

 

VT

ALL

VT1-{1-4,14-17}-{1-8}-{1-3}-{1-7}-{1-4}

VT1-{1-4}-1-{1-12}-{1-7}-{1-4}

VT1-{1-4}-1-{1-48}-{1-7}-{1-4}

VT1-{1-4}-{1-4}-{1-3}-{1-7}-{1-4}

VT1-{1-6,12-17}-1-{1-12}-{1-7}-{1-4}

VT1-{1-6,12-17}-1-{1-48}-{1-7}-{1-4}

VT1-{1-6,12-17}-1-{1-7}-{1-2}

VT1-{1-6,12-17}-{1-12}-1-{1-7}-{1-4}

VT1-{1-6,12-17}-{1-24}-1-{1-7}-{1-4}

VT1-{1-6,12-17}-{1-36}-1-{1-7}-{1-4}

VT1-{1-6,12-17}-{1-4}-{1-12}-{1-7}-{1-4}

VT1-{1-6,12-17}-{1-4}-{1-3}-{1-7}-{1-4}

VT1-{1-6,12-17}-{1-6}-{1-7}-{1-4}

VT1-{2}-{1-2}-{1}-{1-12}-{1-7}-{1-4}

VT1-{2}-{1-2}-{1}-{1-3}-{1-7}-{1-4}

VT1-{2}-{1-3}-{1}-{1-7}-{1-4}

VT1-{2}-{1}-{1-7}-{1-3}

VT1-{5,6,12,13}-1-{1-192}-{1-7}-{1-4}

VT1-{5,6,12,13}-1-{1-48}-{1-7}-{1-4}

VT1-{5-6}-1-{1-7}-{1-2}

VT1-{5-6}-1-{1-7}-{1-4}

VT2-{1-4,14-17}-{1-8}-{1-3}-{1-7}-{1-3}

VT2-{1-6,12-17}-1-{1-12}-{1-7}-{1-3}

VT2-{1-6,12-17}-1-{1-48}-{1-7}-{1-3}

VT2-{1-6,12-17}-{1-4}-{1-12}-{1-7}-{1-3}

VT2-{1-6,12-17}-{1-4}-{1-3}-{1-7}-{1-3}

VT2-{5,6,12,13}-1-{1-192}-{1-7}-{1-3}

VT2-{5,6,12,13}-1-{1-48}-{1-7}-{1-3}

WDMANS

AONS-{E,W}

WDMANS-{E,W}

 

WLEN

WLEN-{E,W}-{ADD,DROP,EXP}-{1530.33,1531.12,1531.90,1532.68,1534.25,1535.04,1535.82,1536.61,1538.19,1538.98,1539.77,1540.56,1542.14,1542.94,1543.73,1544.53,
1546.12,1546.92,,1547.72,1548.51,1550.12,1550.92,1551.72,1552.52,1554.13,1554.94,
1555.75,1556.55,1558.17,1558.98,1559.79,1560.61}


4.5.2  AidUnionId

Table 4-17 AidUnionId 

AID
Patterns
Facility

ALL

EC1-{2}-{1-3}

FAC-{1-4,11-14}-ALL

FAC-{1-4,11-14}-{1-16}

FAC-{1-4,11-14}-{1-4}

FAC-{1-4,11-14}-{1-4}-{1-4}-{1}

FAC-{1-4,14-17}-{1-8}

FAC-{1-4}-1

FAC-{1-4}-{1-4}

FAC-{1-6,12-17}-1

FAC-{1-6,12-17}-ALL

FAC-{1-6,12-17}-{0-11}

FAC-{1-6,12-17}-{0-1}

FAC-{1-6,12-17}-{1-12,14,16,18,20,22,24,26,28,30,32,34,36}

FAC-{1-6,12-17}-{1-12,14,16,18,20,22,24}

FAC-{1-6,12-17}-{1-12}

FAC-{1-6,12-17}-{1-4}

FAC-{1-6,12-17}-{1-6}

FAC-{1-6,12-17}-{1}

FAC-{1-6}-ALL

FAC-{5,6,12,13}-{1}

FAC-{5-6}-{1-28}

FAC-{5-6}-{1-3}

FAC-{8,10}-{1}

FSTE-{1}-{0-7}

FSTE-{1}-{1-8}

OC12-{2}-{1-2}-{1}

OC3-{2}-{1-2}-{1}

T1-{2}-{1-21}

T3-{2}-{1-3}

VFAC-{1-4,11-14}-{1-4}-{1-4}-1

VFAC-{1-6,12-17}-{0-1}

VFAC-{1-6,12-17}-{1,2}

VFAC-{1-6,12-17}-{1,2}-{1,8}

VFAC-{1}-{0-1}

VFAC-{1}-{1-8}

STS

ALL

FAC-{1-4,11-14}-{1-4}-{1-4}-{1}

FAC-{1-6,12-17}-{1-4}

STS-{1-4,11-14}-{1-16}-1

STS-{1-4,11-14}-{1-16}-ALL

STS-{1-4,11-14}-{1-16}-{1,13,25,37}

STS-{1-4,11-14}-{1-16}-{1,25}

STS-{1-4,11-14}-{1-16}-{1,4,7,10,-,46}

STS-{1-4,11-14}-{1-4}-1

STS-{1-4,11-14}-{1-4}-ALL

STS-{1-4,11-14}-{1-4}-{1,13,25,37,-,181}

STS-{1-4,11-14}-{1-4}-{1,25,49,73,-,169}

STS-{1-4,11-14}-{1-4}-{1,4,7,10,-,190}

STS-{1-4,11-14}-{1-4}-{1,49,97,145}

 
STS (continued)

STS-{1-4,11-14}-{1-4}-{1,4}-{1}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,13,25,37}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,25}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4,13,16,25,28,37,40}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4,7}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1-12}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1-3}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1-48}

STS-{1-4,11-14}-{1-4}-{1-192}

STS-{1-4,11-14}-{1-4}-{1-4}-{1}-ALL

STS-{1-4,11-14}-{1-4}-{1-4}-{1}-{1,4,7,13,16,19,25,28,31,43}

STS-{1-4,14-17}-{1-16}-{1-48}

STS-{1-4,14-17}-{1-4}-1

STS-{1-4,14-17}-{1-4}-ALL

STS-{1-4,14-17}-{1-4}-{1,4,7,10}

STS-{1-4,14-17}-{1-4}-{1,4,7}

STS-{1-4,14-17}-{1-4}-{1-3}

STS-{1-4,14-17}-{1-8}-1

STS-{1-4,14-17}-{1-8}-ALL

STS-{1-4,14-17}-{1-8}-{1-3}

STS-{1-4}-1-1

STS-{1-4}-1-ALL

STS-{1-4}-1-{1,13,25,37}

STS-{1-4}-1-{1,4,7,10,-.,46}

STS-{1-4}-1-{1,4,7,10}

STS-{1-4}-1-{1,7,13,19,-,43}

STS-{1-4}-1-{1,7}

STS-{1-4}-1-{1-12}

STS-{1-4}-1-{1-48}

STS-{1-6,12-17}-1

STS-{1-6,12-17}-1-1

STS-{1-6,12-17}-1-ALL

STS (continued)

STS-{1-6,12-17}-1-{1,13,25,37}

STS-{1-6,12-17}-1-{1,4,10,13,16,19,25,28,37,40}

STS-{1-6,12-17}-1-{1,4,7,10,13,16,19,22,25}

STS-{1-6,12-17}-1-{1,4,7,10-46}

STS-{1-6,12-17}-1-{1,4,7,10}

STS-{1-6,12-17}-1-{1,4,7,13,16,19,25,28,37,40,43}

STS-{1-6,12-17}-1-{1,4,7}

STS-{1-6,12-17}-1-{1,4}

STS-{1-6,12-17}-1-{1-12}

STS-{1-6,12-17}-1-{1-48}

STS-{1-6,12-17}-ALL

STS-{1-6,12-17}-{1-12}-1

STS-{1-6,12-17}-{1-24}-1

STS-{1-6,12-17}-{1-36}-1

STS-{1-6,12-17}-{1-4}-1

STS-{1-6,12-17}-{1-4}-ALL

STS-{1-6,12-17}-{1-4}-{1,4,7,10-46}

STS-{1-6,12-17}-{1-4}-{1,4,7}

STS-{1-6,12-17}-{1-4}-{1,4}

STS-{1-6,12-17}-{1-4}-{1-12}

STS-{1-6,12-17}-{1-6}

STS-{2}-{1-2}-{1}-{1,4,7,10}

STS-{2}-{1-2}-{1}-{1,7}

STS-{2}-{1-2}-{1}-{1-12}

STS-{2}-{1-2}-{1}-{1-3}

STS-{2}-{1-2}-{1}-{1}

STS-{2}-{1-3}-{1}

STS-{2}-{1}

STS-{5,6,12,13}-1-1

STS-{5,6,12,13}-1-{1,13,25,37-180}

STS-{5,6,12,13}-1-{1,13,25,37}

STS-{5,6,12,13}-1-{1,4,7,10,13,16,19,22,25}

STS-{5,6,12,13}-1-{1,4,7,10-190}

STS-{5,6,12,13}-1-{1,4,7,10-46}

STS-{5,6,12,13}-1-{1,4,7,13,16,19,25,28,37,40,43}

STS (continued)

STS-{5,6,12,13}-1-{1,49,97,145}

STS-{5,6,12,13}-1-{1-192}

STS-{5,6,12,13}-1-{1-48}

STS-{5,6}-1

STS-{5,6}-{1-4}-1

STS-{5-6}-ALL

VFAC-{1-6,12-17}-{0-1}

 
VT

ALL

VT1-{1-4,14-17}-{1-8}-{1-3}-{1-7}-{1-4}

VT1-{1-4}-1-{1-12}-{1-7}-{1-4}

VT1-{1-4}-1-{1-48}-{1-7}-{1-4}

VT1-{1-4}-{1-4}-{1-3}-{1-7}-{1-4}

VT1-{1-6,12-17}-1-{1-12}-{1-7}-{1-4}

VT1-{1-6,12-17}-1-{1-48}-{1-7}-{1-4}

VT1-{1-6,12-17}-1-{1-7}-{1-2}

VT1-{1-6,12-17}-{1-12}-1-{1-7}-{1-4}

VT1-{1-6,12-17}-{1-24}-1-{1-7}-{1-4}

VT1-{1-6,12-17}-{1-36}-1-{1-7}-{1-4}

VT1-{1-6,12-17}-{1-4}-{1-12}-{1-7}-{1-4}

VT1-{1-6,12-17}-{1-4}-{1-3}-{1-7}-{1-4}

VT1-{1-6,12-17}-{1-6}-{1-7}-{1-4}

VT1-{2}-{1-2}-{1}-{1-12}-{1-7}-{1-4}

VT1-{2}-{1-2}-{1}-{1-3}-{1-7}-{1-4}

VT1-{2}-{1-3}-{1}-{1-7}-{1-4}

VT1-{2}-{1}-{1-7}-{1-3}

VT1-{5,6,12,13}-1-{1-192}-{1-7}-{1-4}

VT1-{5,6,12,13}-1-{1-48}-{1-7}-{1-4}

VT1-{5-6}-1-{1-7}-{1-2}

VT1-{5-6}-1-{1-7}-{1-4}

VT2-{1-4,14-17}-{1-8}-{1-3}-{1-7}-{1-3}

VT2-{1-6,12-17}-1-{1-12}-{1-7}-{1-3}

VT2-{1-6,12-17}-1-{1-48}-{1-7}-{1-3}

VT2-{1-6,12-17}-{1-4}-{1-12}-{1-7}-{1-3}

VT2-{1-6,12-17}-{1-4}-{1-3}-{1-7}-{1-3}

VT2-{5,6,12,13}-1-{1-192}-{1-7}-{1-3}

VT2-{5,6,12,13}-1-{1-48}-{1-7}-{1-3}


4.5.3  AidUnionId1

Table 4-18 AidUnionId1 

AID
Patterns

BLSR

ALL

BLSR-RINGID


4.5.4  BAND

(Cisco ONS 15454 only)

The BAND AID is used to access Optical Multiplex Section (OMS) layer of Optical Network units.

Table 4-19 BAND 

Pattern
Description

ALL

All of the OMSs of the NE. The ALL AID is applicable for retrieve-only commands

BAND-{1-6,12-17}-{1-4}-ALL

All the Channels in a Band OADM (1Bn, 4Bn) units

BAND-{1-6,12-17}-{1-4}-{RX,TX}

The Receive/Transmit Channels in a Band OADM (1Bn, 4Bn) units

BAND-{1-6,12-17}-{1}-ALL

All the Channels in an Optical Multiplexer/Demultiplexer (4Ch) units

BAND-{1-6,12-17}-{1}-{RX,TX}

The Receive/Transmit Channels in an Optical Multiplexer/Demultiplexer (4Ch) units


4.5.5  BITS

AID for BITS (Building Integrated Timing Supply).

Table 4-20 BITS 

Pattern
Description

ALL

The ALL AID is applicable to RTRV commands only (RTRV-BITS and RTRV-ALM/COND-BITS). The All AID is equivalent to BITS-ALL for these commands. For RTRV-ALM/COND-SYNCN, the ALL AID translates to BITS-ALL, SYNC-BITS1, and SYNC-BITS2

BITS-ALL

BITS AIDS of both BITS-1 and BITS-2 in the RTRV-BITS command

BITS-{1,2}

Individual BITS AID

Note ONS 15310-CL does not support SYNC-BITS2.

SYNC-BITS{1,2}

BITS-OUT AIDs of BITS-1 and BITS-2. These AIDs are applicable only in ED/RTRV-BITS commands and are used for setting and retrieving the BITS-OUT parameters.


4.5.6  BLSR

BLSR AIDs are used to access the specific BLSR of the NE. Applies to ONS 15454, 15454, and 15600.

Table 4-21 BLSR 

Pattern
Description

ALL

All the BLSRs in the NE. The ALL AID is applicable for retrieve-only commands like RTRV-<MOD_RING> (BLSR)

BLSR-RINGID

RINGID is a string of up to six characters. Valid characters are [A-Z,0-9] (case insensitive)


4.5.7  CHANNEL

(Cisco ONS 15454 only)

Accesses the Optical Channels (OCH) layer of Optical Network/Client units.

Table 4-22 CHANNEL 

CHANNEL Values
Description

ALL

ALL OCHs of the NE. The ALL AID is applicable for retrieve-only commands

CHAN-{1-6,12-17}-ALL

All the Channels of an Optical Transponder/Muxponder. The format is CHAN-[SLOT]-ALL

CHAN-{1-6,12-17}-{1-32}-ALL

All the Channels in an Optical Multiplexer/Demultiplexer (32Ch) units. The format is CHAN-[SLOT]-[PORT]-ALL

CHAN-{1-6,12-17}-{1-32}-{RX,TX}

The Receive/Transmit Channels in an Optical Multiplexer/Demultiplexer (32Ch) units. The format is CHAN-[SLOT]-[PORT]-[DIRECTION]

CHAN-{1-6,12-17}-{1-4}-ALL

All the Channels in an OADM (1Ch, 2Ch, 4Ch) units and Optical and Optical Multiplexer/Demultiplexer (4Ch) units. The format is CHAN-[SLOT]-[PORT]-ALL

CHAN-{1-6,12-17}-{1-4}-{RX,TX}

The Receive/Transmit Channels in an OADM (1Ch, 2Ch, 4Ch) units and Optical Multiplexer/Demultiplexer (4Ch) units. The format is CHAN-[SLOT]-[PORT]-[DIRECTION]

CHAN-{1-6,12-17}-{2,3}

A single channel of an Optical Transponder/Muxponder. The TXP_MR_10G and TXP_MR_2.5G use CHAN-slot-2 for the 1 DWDM Facility. TXPP_MR_2.5G uses CHAN-slot-{2,3} for the 2 DWDM facilities. The format is CHAN-[SLOT]-[PORT]

CHAN-{1-6,12-17}-{2,5}

A single channel of an Optical Transponder/Muxponder. The TXP_MR_10G uses CHAN-slot-2 for the 1 DWDM facility. MXP_2.5G_10G uses the CHAN-slot-5 for the 1 DWDM facility. The format is CHAN-[SLOT]-[PORT]


4.5.8  COM

Common

Table 4-23 COM 

Pattern
Description

COM

Common


4.5.9  CrossConnectId

Table 4-24 CrossConnect Id 

Pattern
Description

FACILITY

ALL

EC1-{2}-{1-3}

FAC-{1-4,11-14}-ALL

FAC-{1-4,11-14}-{1-16}

FAC-{1-4,11-14}-{1-4}

FAC-{1-4,11-14}-{1-4}-{1-4}-{1}

FAC-{1-4,14-17}-{1-8}

FAC-{1-4}-1

FAC-{1-4}-{1-4}

FAC-{1-6,12-17}-1

FAC-{1-6,12-17}-ALL

FAC-{1-6,12-17}-{0-11}

FAC-{1-6,12-17}-{0-1}

FAC-{1-6,12-17}-{1-12,14,16,18,20,22,24,26,28,30,32,34,36}

FAC-{1-6,12-17}-{1-12,14,16,18,20,22,24}

FAC-{1-6,12-17}-{1-12}

FAC-{1-6,12-17}-{1-4}

FAC-{1-6,12-17}-{1-6}

FAC-{1-6,12-17}-{1}

FAC-{1-6}-ALL

FAC-{5,6,12,13}-{1}

Facility

FAC-{5-6}-{1-28}

FAC-{5-6}-{1-3}

FAC-{8,10}-{1}

FSTE-{1}-{0-7}

FSTE-{1}-{1-8}

OC12-{2}-{1-2}-{1}

OC3-{2}-{1-2}-{1}

T1-{2}-{1-21}

T3-{2}-{1-3}

VFAC-{1-4,11-14}-{1-4}-{1-4}-1

VFAC-{1-6,12-17}-{0-1}

VFAC-{1-6,12-17}-{1,2}

VFAC-{1-6,12-17}-{1,2}-{1,8}

VFAC-{1}-{0-1}

VFAC-{1}-{1-8}

STS

ALL

FAC-{1-4,11-14}-{1-4}-{1-4}-{1}

FAC-{1-6,12-17}-{1-4}

STS-{1-4,11-14}-{1-16}-1

STS-{1-4,11-14}-{1-16}-ALL

STS-{1-4,11-14}-{1-16}-{1,13,25,37}

STS-{1-4,11-14}-{1-16}-{1,25}

STS-{1-4,11-14}-{1-16}-{1,4,7,10,-,46}

STS-{1-4,11-14}-{1-4}-1

STS-{1-4,11-14}-{1-4}-ALL

STS-{1-4,11-14}-{1-4}-{1,13,25,37,-,181}

STS-{1-4,11-14}-{1-4}-{1,25,49,73,-,169}

STS-{1-4,11-14}-{1-4}-{1,4,7,10,-,190}

STS-{1-4,11-14}-{1-4}-{1,49,97,145}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,13,25,37}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,25}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4,13,16,25,28,37,40}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4,7}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1-12}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1-3}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1-48}

STS-{1-4,11-14}-{1-4}-{1-192}

STS-{1-4,11-14}-{1-4}-{1-4}-{1}-ALL

STS-{1-4,11-14}-{1-4}-{1-4}-{1}-{1,4,7,13,16,19,25,28,31,43}

STS

STS-{1-4,14-17}-{1-16}-{1-48}

STS-{1-4,14-17}-{1-4}-1

STS-{1-4,14-17}-{1-4}-ALL

STS-{1-4,14-17}-{1-4}-{1,4,7,10}

STS-{1-4,14-17}-{1-4}-{1,4,7}

STS-{1-4,14-17}-{1-4}-{1-3}

STS-{1-4,14-17}-{1-8}-1

STS-{1-4,14-17}-{1-8}-ALL

STS-{1-4,14-17}-{1-8}-{1-3}

STS-{1-4}-1-1

STS-{1-4}-1-ALL

STS-{1-4}-1-{1,13,25,37}

STS-{1-4}-1-{1,4,7,10,-.,46}

STS-{1-4}-1-{1,4,7,10}

STS-{1-4}-1-{1,7,13,19,-,43}

STS-{1-4}-1-{1,7}

STS-{1-4}-1-{1-12}

STS-{1-4}-1-{1-48}

STS-{1-6,12-17}-1

STS-{1-6,12-17}-1-1

STS-{1-6,12-17}-1-ALL

STS-{1-6,12-17}-1-{1,13,25,37}

STS-{1-6,12-17}-1-{1,4,10,13,16,19,25,28,37,40}

STS-{1-6,12-17}-1-{1,4,7,10,13,16,19,22,25}

STS-{1-6,12-17}-1-{1,4,7,10-46}

STS-{1-6,12-17}-1-{1,4,7,10}

STS-{1-6,12-17}-1-{1,4,7,13,16,19,25,28,37,40,43}

STS-{1-6,12-17}-1-{1,4,7}

STS-{1-6,12-17}-1-{1,4}

STS-{1-6,12-17}-1-{1-12}

STS-{1-6,12-17}-1-{1-48}

STS-{1-6,12-17}-ALL

STS

STS-{1-6,12-17}-{1-12}-1

STS-{1-6,12-17}-{1-24}-1

STS-{1-6,12-17}-{1-36}-1

STS-{1-6,12-17}-{1-4}-1

STS-{1-6,12-17}-{1-4}-ALL

STS-{1-6,12-17}-{1-4}-{1,4,7,10-46}

STS-{1-6,12-17}-{1-4}-{1,4,7}

STS-{1-6,12-17}-{1-4}-{1,4}

STS-{1-6,12-17}-{1-4}-{1-12}

STS-{1-6,12-17}-{1-6}

STS-{2}-{1-2}-{1}-{1,4,7,10}

STS-{2}-{1-2}-{1}-{1,7}

STS-{2}-{1-2}-{1}-{1-12}

STS-{2}-{1-2}-{1}-{1-3}

STS-{2}-{1-2}-{1}-{1}

STS-{2}-{1-3}-{1}

STS-{2}-{1}

STS-{5,6,12,13}-1-1

STS-{5,6,12,13}-1-{1,13,25,37-180}

STS-{5,6,12,13}-1-{1,13,25,37}

STS-{5,6,12,13}-1-{1,4,7,10,13,16,19,22,25}

STS-{5,6,12,13}-1-{1,4,7,10-190}

STS-{5,6,12,13}-1-{1,4,7,10-46}

STS-{5,6,12,13}-1-{1,4,7,13,16,19,25,28,37,40,43}

STS-{5,6,12,13}-1-{1,49,97,145}

STS-{5,6,12,13}-1-{1-192}

STS-{5,6,12,13}-1-{1-48}

STS-{5,6}-1

STS-{5,6}-{1-4}-1

STS-{5-6}-ALL

VFAC-{1-6,12-17}-{0-1}


4.5.10  CrossConnectId1

Table 4-25 CrossConnectId1 

AID
Pattern

VCM

VCM-{1-6,12-17}-{0-1}-ALL

VCM-{1-6,12-17}-{0-1}-{1-256}

VCM-{1-6,12-17}-{1-4}-ALL

VCM-{1-6,12-17}-{1-4}-{1-256}

FACILITY

ALL

EC1-{2}-{1-3}

FAC-{1-4,11-14}-ALL

FAC-{1-4,11-14}-{1-16}

FAC-{1-4,11-14}-{1-4}

FAC-{1-4,11-14}-{1-4}-{1-4}-{1}

FAC-{1-4,14-17}-{1-8}

FAC-{1-4}-1

FAC-{1-4}-{1-4}

FAC-{1-6,12-17}-1

FAC-{1-6,12-17}-ALL

FAC-{1-6,12-17}-{0-11}

FAC-{1-6,12-17}-{0-1}

FAC-{1-6,12-17}-{1-12,14,16,18,20,22,24,26,28,30,32,34,36}

FAC-{1-6,12-17}-{1-12,14,16,18,20,22,24}

FAC-{1-6,12-17}-{1-12}

FAC-{1-6,12-17}-{1-4}

FAC-{1-6,12-17}-{1-6}

FAC-{1-6,12-17}-{1}

FAC-{1-6}-ALL

FAC-{5,6,12,13}-{1}

FAC-{5-6}-{1-28}

FAC-{5-6}-{1-3}

FAC-{8,10}-{1}

Facility (continued)

FSTE-{1}-{0-7}

FSTE-{1}-{1-8}

OC12-{2}-{1-2}-{1}

OC3-{2}-{1-2}-{1}

T1-{2}-{1-21}

T3-{2}-{1-3}

VFAC-{1-4,11-14}-{1-4}-{1-4}-1

VFAC-{1-6,12-17}-{0-1}

VFAC-{1-6,12-17}-{1,2}

VFAC-{1-6,12-17}-{1,2}-{1,8}

VFAC-{1}-{0-1}

VFAC-{1}-{1-8}

STS

ALL

FAC-{1-4,11-14}-{1-4}-{1-4}-{1}

FAC-{1-6,12-17}-{1-4}

STS-{1-4,11-14}-{1-16}-1

STS-{1-4,11-14}-{1-16}-ALL

STS-{1-4,11-14}-{1-16}-{1,13,25,37}

STS-{1-4,11-14}-{1-16}-{1,25}

STS-{1-4,11-14}-{1-16}-{1,4,7,10,-,46}

STS-{1-4,11-14}-{1-4}-1

STS-{1-4,11-14}-{1-4}-ALL

STS-{1-4,11-14}-{1-4}-{1,13,25,37,-,181}

STS-{1-4,11-14}-{1-4}-{1,25,49,73,-,169}

STS-{1-4,11-14}-{1-4}-{1,4,7,10,-,190}

STS-{1-4,11-14}-{1-4}-{1,49,97,145}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,13,25,37}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,25}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4,13,16,25,28,37,40}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4,7}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1-12}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1-3}

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1-48}

STS-{1-4,11-14}-{1-4}-{1-192}

STS-{1-4,11-14}-{1-4}-{1-4}-{1}-ALL

STS-{1-4,11-14}-{1-4}-{1-4}-{1}-{1,4,7,13,16,19,25,28,31,43}

STS-{1-4,14-17}-{1-16}-{1-48}

STS-{1-4,14-17}-{1-4}-1

STS-{1-4,14-17}-{1-4}-ALL

STS-{1-4,14-17}-{1-4}-{1,4,7,10}

STS-{1-4,14-17}-{1-4}-{1,4,7}

STS-{1-4,14-17}-{1-4}-{1-3}

STS (continued)

STS-{1-4,14-17}-{1-8}-1

STS-{1-4,14-17}-{1-8}-ALL

STS-{1-4,14-17}-{1-8}-{1-3}

STS-{1-4}-1-1

STS-{1-4}-1-ALL

STS-{1-4}-1-{1,13,25,37}

STS-{1-4}-1-{1,4,7,10,-.,46}

STS-{1-4}-1-{1,4,7,10}

STS-{1-4}-1-{1,7,13,19,-,43}

STS-{1-4}-1-{1,7}

STS-{1-4}-1-{1-12}

STS-{1-4}-1-{1-48}

STS-{1-6,12-17}-1

STS-{1-6,12-17}-1-1

STS-{1-6,12-17}-1-ALL

STS-{1-6,12-17}-1-{1,13,25,37}

STS-{1-6,12-17}-1-{1,4,10,13,16,19,25,28,37,40}

STS-{1-6,12-17}-1-{1,4,7,10,13,16,19,22,25}

STS-{1-6,12-17}-1-{1,4,7,10-46}

STS-{1-6,12-17}-1-{1,4,7,10}

STS-{1-6,12-17}-1-{1,4,7,13,16,19,25,28,37,40,43}

STS-{1-6,12-17}-1-{1,4,7}

STS-{1-6,12-17}-1-{1,4}

STS-{1-6,12-17}-1-{1-12}

STS-{1-6,12-17}-1-{1-48}

STS-{1-6,12-17}-ALL

STS-{1-6,12-17}-{1-12}-1

STS-{1-6,12-17}-{1-24}-1

STS-{1-6,12-17}-{1-36}-1

STS-{1-6,12-17}-{1-4}-1

STS-{1-6,12-17}-{1-4}-ALL

STS-{1-6,12-17}-{1-4}-{1,4,7,10-46}

STS-{1-6,12-17}-{1-4}-{1,4,7}

STS (continued)

STS-{1-6,12-17}-{1-4}-{1,4}

STS-{1-6,12-17}-{1-4}-{1-12}

STS-{1-6,12-17}-{1-6}

STS-{2}-{1-2}-{1}-{1,4,7,10}

STS-{2}-{1-2}-{1}-{1,7}

STS-{2}-{1-2}-{1}-{1-12}

STS-{2}-{1-2}-{1}-{1-3}

STS-{2}-{1-2}-{1}-{1}

STS-{2}-{1-3}-{1}

STS-{2}-{1}

STS-{5,6,12,13}-1-1

STS-{5,6,12,13}-1-{1,13,25,37-180}

STS-{5,6,12,13}-1-{1,13,25,37}

STS-{5,6,12,13}-1-{1,4,7,10,13,16,19,22,25}

STS-{5,6,12,13}-1-{1,4,7,10-190}

STS-{5,6,12,13}-1-{1,4,7,10-46}

STS-{5,6,12,13}-1-{1,4,7,13,16,19,25,28,37,40,43}

STS-{5,6,12,13}-1-{1,49,97,145}

STS-{5,6,12,13}-1-{1-192}

STS-{5,6,12,13}-1-{1-48}

STS-{5,6}-1

STS-{5,6}-{1-4}-1

STS-{5-6}-ALL

VFAC-{1-6,12-17}-{0-1}

VT

ALL

VT1-{1-4,14-17}-{1-8}-{1-3}-{1-7}-{1-4}

VT1-{1-4}-1-{1-12}-{1-7}-{1-4}

VT1-{1-4}-1-{1-48}-{1-7}-{1-4}

VT1-{1-4}-{1-4}-{1-3}-{1-7}-{1-4}

VT1-{1-6,12-17}-1-{1-12}-{1-7}-{1-4}

VT1-{1-6,12-17}-1-{1-48}-{1-7}-{1-4}

VT1-{1-6,12-17}-1-{1-7}-{1-2}

VT1-{1-6,12-17}-{1-12}-1-{1-7}-{1-4}

VT1-{1-6,12-17}-{1-24}-1-{1-7}-{1-4}

VT1-{1-6,12-17}-{1-36}-1-{1-7}-{1-4}

VT1-{1-6,12-17}-{1-4}-{1-12}-{1-7}-{1-4}

VT1-{1-6,12-17}-{1-4}-{1-3}-{1-7}-{1-4}

VT1-{1-6,12-17}-{1-6}-{1-7}-{1-4}

VT1-{2}-{1-2}-{1}-{1-12}-{1-7}-{1-4}

VT1-{2}-{1-2}-{1}-{1-3}-{1-7}-{1-4}

VT1-{2}-{1-3}-{1}-{1-7}-{1-4}

VT1-{2}-{1}-{1-7}-{1-3}

VT1-{5,6,12,13}-1-{1-192}-{1-7}-{1-4}

VT1-{5,6,12,13}-1-{1-48}-{1-7}-{1-4}

VT1-{5-6}-1-{1-7}-{1-2}

VT1-{5-6}-1-{1-7}-{1-4}

VT2-{1-4,14-17}-{1-8}-{1-3}-{1-7}-{1-3}

VT2-{1-6,12-17}-1-{1-12}-{1-7}-{1-3}

VT2-{1-6,12-17}-1-{1-48}-{1-7}-{1-3}

VT2-{1-6,12-17}-{1-4}-{1-12}-{1-7}-{1-3}

VT2-{1-6,12-17}-{1-4}-{1-3}-{1-7}-{1-3}

VT2-{5,6,12,13}-1-{1-192}-{1-7}-{1-3}

VT2-{5,6,12,13}-1-{1-48}-{1-7}-{1-3}


4.5.11  DS1

(Cisco ONS 15454 only)

Used to access the DS-1 frame layer of the DS3XM. The format is DS1-[SLOT]-[DS3PORT]-[DS1PORT]

Table 4-26 DS1 

Pattern
Description

ALL

The ALL AID applies to RTRV-DS1 and RTRV-ALM/COND-DS1 commands only to retrieve all DS1 facilities and DS1-level alarms/conditions on the NE

DS1-{1-6,12-17}-{1-12,13,15,17,19,21,23,25,27,29,31,33,35}-{1-28}

DS1 AIDs for DS3XM-12 (ONS 15454) STS48 Backplane Rate. Ports 1 to12 are always available, odd ports after 12 are available

DS1-{1-6,12-17}-{1-12,13,15,17,19,21,23}-{1-28}

DS1 AIDs for DS3XM-12 (ONS 15454) STS12 Backplane Rate. Ports 1 to 12 are always available, odd ports after 12 are available

DS1-{1-6,12-17}-{1-6}-{1-28}

DS1 AIDs for the DS3XM-6 card (ONS 15454)


4.5.12  ENV

The environmental AID for the AIC/AICI cards

Table 4-27 ENV 

Pattern
Description

ALL

The ALL AID applies to retrieve-only commands: RTRV-ALM/COND-ENV, RTRV-ATTR-CONT and RTRV-ATTR-ENV

ENV-IN-ALL

Environmental AID for ALL Environmental alarms on the Cisco ONS 15454, 15327, 15600, 15310-CL

ONS 15454 Environmental AIDs

ENV-IN-{1-4}

Environmental AID for the AIC Card on the ONS 15454. "IN" is used for Environmental Alarms

ENV-IN-{1-20}

Environmental AID for the AICI Card on the ONS 15454. "IN" is used for Environmental Alarms

ENV-IN-{1-32}

Environmental AID for AICI Card Extensions on the ONS 15454. "IN" is used for Environmental Alarms

ENV-IN-{1-16}

Environmental AID on the ONS 15454. "IN" is used for Environmental Alarms

ENV-OUT-{1-4}

Environmental AID for the AIC/AICI Cards on the ONS 15454. "OUT" is used for Environmental Controls

ENV-OUT-{1-16}

Environmental AID for AICI Card Extensions on the ONS 15454. "OUT" is used for Environmental Controls

ONS 15327 Environmental AIDs

ENV-IN-{1-6}

Environmental AID for the ONS 15327. "IN" is used for Environmental Alarms

ENV-OUT-{1-2}

Environmental AID for the ONS 15327. "OUT" is used for Environmental Controls

ONS 15600 Environmental AIDs

ENV-IN-ALL

Environmental AID for ALL Environmental alarms on the Cisco ONS 15454, 15327, 15600, 15310-CL

ENV-OUT-{1-16}

Environmental AID for the ONS 15600. "OUT" is used for Environmental Controls

ENV-OUT-ALL

All Environmental Control Output contacts

ONS 15310-CL Environmental AIDs

ENV-IN-{1-3}

Environmental AID for the ONS 15310-CL. "IN" is used for Environmental Alarms

ENV-OUT-{1-2}

Environmental AID for the ONS 15310-CL. "OUT" is used for Environmental Controls


4.5.13  EQPT

Equipment AIDs are used to access specific cards.

In the ONS 15454, the OC48/OC192 cards can only use the high speed slots (Slot 5, Slot 6, Slot 12, Slot 13).

In the ONS 15327, Slots 1 to 4 are for I/O cards (Ethernet and Optical cards). Slots 5 and 6 are for the XTC cards, and Slots 7 and 8 are for the MIC cards.

In the ONS 15600, Slots 1 through 4 and Slots 11 through 14 are used for I/O cards. Slot 5 and 10 are reserved for the TSC card. Slots 6, 7, and Slots 8, 9 are reserved for the CXC/SSXC card.

Table 4-28 EQPT 

Pattern
Description

AIP

The AID for the AIP. It is used for RTRV-INV output only (ONS 15454)

ALL

Only used for RTRV-INV, RTRV-EQPT, and RTRV-ALM/COND-EQPT commands. RTRV-INV returns all the inventory information for the NE. The ONS 15454 includes the I/O cards, controller cards, and the AIP, BP, and FAN. The ONS 15327 includes the I/O cards and controller cards. RTRV-EQPT with ALL AID returns EQPT information on all the slots. RTRV-ALM/COND-EQPT with ALL AID returns EQPT and PWR-A and PWR-B type of alarms/conditions

BIC-ALL

AIDs for the BIC (Backplane Interface Connector), BIC-A and BIC-B. These AIDs are valid only for the RTRV-ALM-EQPT and RTRV-COND-EQPT commands

BIC-{A,B}

AIDs for the BIC (Backplane Interface Connectors). These AIDs are valid only for the RTRV-ALM-EQPT and RTRV-COND-EQPT commands

BP

The AID for the backplane. It is used for RTRV-INV output only (ONS 15454 only)

FAN

The AID for the fan tray. It is used for RTRV-INV output only

PIM-{1-4,11-14}-ALL

Pluggable Interface Module. Applicable for RTRV-EQPT and RTRV-INV commands pertaining to the ONS 15600 ASAP Card only. Format is PIM-[SLOT]-[PIM]-[PPM]

PIM-{1-4,11-14}-{1-4}

Pluggable Interface Module. Applicable for ENT/ED/RTRV/DLT-EQPT and RTRV-INV commands pertaining to the ONS 15600 ASAP Card only. Format is PPM-[SLOT]-[PIM]-[PPM]

PPM-1-{1,2}

Pluggable Port Module AID for the ONS 15310-CL ML-100T-8/CE-100T-8 Card. Format is PPM-[SLOT]-[PPM]

PPM-2-{1,2}

PPM AID for the ONS 15310-CL. Format is PPM-[SLOT]-[PPM]

PPM-{1-4,11-14}-{1-4}-ALL

PPM. Applicable for the RTRV-EQPT and RTRV-INV commands pertaining to the ONS 15600 ASAP Card only. Format is PPM-[SLOT]-[PIM]-[PPM]

PPM-{1-4,11-14}-{1-4}-{1-4}

PPM. Applicable for the ENT/ED/RTRV/DLT-EQPT and RTRV-INV commands pertaining to the ONS 15600 ASAP Card only. Format is PPM-[SLOT]-[PIM]-[PPM]

PPM-{1-6,12-17}-{1-4}

PPM AID for DWDM MXP_2.5G_10G, TXP_MR_10G, TXP_MR_2.5G, TXPP_MR_2.5G, MXP_2.5G_10E, and TXP_MR_10E Cards. Format of AID is PPM-[SLOT]-[PPM]

PPM-{1-6,12-17}-{1-8}

PPM AID for the ONS 15454 MXP_MR_2.5G and MXPP_MR_2.5G Card. Format of AID is PPM-[SLOT]-[PPM]

PWR-ALL

AIDs for the Power Supply Sources. These AIDs are valid only for the RTRV-ALM-EQPT and RTRV-COND-EQPT commands.

PWR-{A,B}

AIDs for the Power Supply Sources. These AIDs are valid only for the RTRV-ALM-EQPT and RTRV-COND-EQPT commands.

SLOT-ALL

All of the NE equipment AIDs

SLOT-{1-14}

EQPT AID for the ONS 15600 where format is SLOT-[SLOT]

SLOT-{1-17}

EQPT AID for the ONS 15454 where format is SLOT-[SLOT]

SLOT-{1-2}

EQPT AID for the ONS 15310-CL where format is SLOT-[SLOT]

SLOT-{1-4,11-14}

ONS 15600 I/O Slots only

SLOT-{1-6,12-17}

Individual equipment AID of the I/O card units or slots for the ONS 15454 where format is SLOT-[SLOT]

SLOT-{1-8}

EQPT AID for ONS 15327 where format is SLOT-[SLOT]


4.5.14  FACILITY

Facilities AIDs are used to access specific ports. Applicable to Cisco ONS 15454, 15327, 15600, 15310-CL.


Note Because the ONS 15310-CL supports more than one type of facility per slot, the FAC-AID format is not supported. The format Tn-, EC1- , and OCn- is used instead.


ONS 15454, 15327, and 15600 Facility AID format:

Format for Optical and EC1 Facilities Without PPM: FAC-[SLOT]-[PORT]

Format for Optical Facilities With PPM: FAC-[SLOT]-[PPM]-[PORT]

Format for Optical Facilities With PPM and PIM: FAC-[SLOT]-[PIM]-[PPM]-[PORT]

Format for DS1-Flavored Electrical Facilities: FAC-[SLOT]-[PORT]

Format for DS3-Flavored (Including DS3I) Electrical Facilities: FAC-[SLOT]-[PORT]

Format for POS Ports: VFAC-[SLOT]-[PORT]

Format for POS Port with PIM and PPM:VFAC-[SLOT]-[PIM]-[PPM]-[PORT]

ONS 15310-CL Facility AID format:

Format for Optical Facilities Without PPM: OCn-[SLOT]-[PORT]

Format for Optical Facilities With PPM: OCn-[SLOT]-[PPM]-[PORT]

Format for EC1 Facilities: EC1-[SLOT]-[PORT]

Format for DS1-Flavored Electrical Facilities: T1-[SLOT]-[PORT]

Format for DS3-Flavored Electrical Facilities: T3-[SLOT]-[PORT]

Format for POS Ports: VFAC-[SLOT]-[PORT]

Format for FSTE Ethernet Facilities: FSTE-[SLOT]-[PORT]

Table 4-29 FACILITY 

Pattern
Description

ALL

The ALL AID is applicable for RTRV-only commands (RTRV-rr type of commands), for example: RTRV-OC48 with ALL AID returns all OC48 facilities on the node. RTRV-T1 with ALL AID returns all T1 facilities on the node.

EC1-{2}-{1-3}

Facility AIDs for EC1 ports on the 15310-CL-CTX (ONS 15310-CL), where format is EC1-[SLOT]-[PORT]

FAC-{1-4,11-14}-ALL

Facility AID for all I/O Unit or Slot on the ONS 15600, where format is FAC-[SLOT]-ALL

FAC-{1-4,11-14}-{1-16}

Facility AIDs for the 16-Port OC48 (ONS 15600), where format is FAC-[SLOT]-[PORT]

FAC-{1-4,11-14}-{1-4}

Facility AID for the 4-Port OC192 (ONS 15600), where format is FAC-[SLOT]-[PORT]

FAC-{1-4,11-14}-{1-4}-{1-4}-{1}

Facility AID for the ASAP Card with PIM and PPM. Format is FAC-[SLOT]-[PIM]-[PPM]-[PORT]

FAC-{1-4,14-17}-{1-8}

Facilities for an OC3-8 card (ONS 15454) where the format is FAC-[SLOT]-[PORT]

FAC-{1-4}-1

Facility AIDs for OC12, OC48 (ONS 15327) where the format is FAC-[SLOT]-[PORT]

FAC-{1-4}-{1-4}

Facility AIDs for 4-Port OC3 (ONS 15327) where the format is FAC-[SLOT]-[PORT]

FAC-{1-6,12-17}-1

Facility AID for the 1 Client (CLNT) Port on a TXP_MR_10G, TXP_MR_2.5G, TXP_MR_2.5G or TXPP_MR_2.5G card (ONS 15454) where the format is FAC-[SLOT]-[PORT]

FAC-{1-6,12-17}-ALL

All the facilities of an I/O unit or slot (ONS 15454) where the format is FAC-[SLOT]-[ALL]

FAC-{1-6,12-17}-{0-11}

Facilities for the Ethernet Front-end ports on the ML100T-12 card. Ports are numbered starting with 0 (i.e. the first port is FAC-SLOT-0, second port is FAC-SLOT-1, ..., last port is FAC-SLOT-11 for ML100T-12 and first port is FAC-SLOT-0 and second port is FAC-SLOT-1 for ML1000-2) (ONS 15454). The format is FAC-[SLOT]-[PORT]

FAC-{1-6,12-17}-{0-1}

Facilities for the Ethernet Backend Ports on the ML1000-2 card. Ports are 0-based, (i.e the first port is FAC-SLOT-0 and the second port is FAC-SLOT-1) (ONS 15454). The format is FAC-[SLOT]-[PORT]

FAC-{1-6,12-17}-{1-12,14,16,18,
20,22,24,26,28,30,32,34,36}

Facility AIDs for the DS3XM-12 STS48 Backplane Rate where format is FAC-[SLOT]-[PORT]. Ports 1 through 12 are always available, but only even ports after 12 are available

FAC-{1-6,12-17}-{1-12,14,16,18,
20,22,24}

Facility AIDs for DS3XM-12 STS12 Backplane Rate where format is FAC-[SLOT]-[PORT]. Ports 1 through 12 are always available, but only even ports after 12 are available

FAC-{1-6,12-17}-{1-12}

Facilities AID for the EC1 and DS3 cards (ONS 15454) where format is FAC-[SLOT]-[PORT]

FAC-{1-6,12-17}-{1-4}

Facility AID for the four Client (CLNT) facilities on the MXP_2.5G_10G card. Facility AID for 4-Port G1000/FC_MR-4 Card. Facility AID for creating/editing cross-connects (STS1/VC3, STS3C/VC4, STS6C/VC4-2C, STS9C/VC4-3C, STS12C/VC4-4C, and STS24C/VC4-8C) for the 4-Port G1000/FC_MR-4 Card (ONS 15454) where format is FAC-[SLOT]-[PORT]

FAC-{1-6,12-17}-{1-6}

Facilities for the DS3XM card (ONS 15454) where format FAC-[SLOT]-[PORT]

FAC-{1-6,12-17}-{1}

Facility AID for the 1-Port OC12, OC48AS and OC3 in OSC-CSM cards. Facility AID for the client ports on the MXP/TXP and TXP_MR_2.5G cards (ONS 15454) where format is FAC-[SLOT]-[PORT]

FAC-{1-6}-ALL

Facility AIDs for I/O unit or slots (ONS 15327) where format is FAC-[SLOT]-[ALL]

FAC-{5,6,12,13}-{1}

Facility AID for the OC48/OC192 cards. The OC48/OC192 cards can only use the high speed slots (Slot 5, Slot 6, Slot 12, Slot 13) (ONS 15454) where format is FAC-[SLOT]-[PORT]

FAC-{5-6}-{1-28}

Facility AID for the T1 Ports on the XTC-28-3 (ONS 15327) where format is FAC-[SLOT]-[PORT]

FAC-{5-6}-{1-3}

Facility AIDs on the TR Ports in the XTC-28-3 (ONS 15327) where format is FAC-[SLOT]-[PORT]

FAC-{8,10}-{1}

Facility AID for the OSCM card. The OSCM cards can only use the XC slots (Slot-8, Slot-10) (ONS 15454) where format is FAC-[SLOT]-[PORT]

FSTE-{1}-{0-7}

Facility AIDs for front end ports on the ML-100T-8 card (ONS 15310-CL), when provisioned in L2L3 mode. Format is FSTE-[SLOT]-[PORT]. Port numbering is 0-based

FSTE-{1}-{1-8}

Facility AIDs for front end ports on the CE-100T-8 card (ONS 15310-CL), when provisioned in Mapper mode. Format is FSTE-[SLOT]-[PORT]. Port numbering is 1-based

OC12-{2}-{1-2}-{1}

Facility AIDs for OC12 ports on the 15310-CL-CTX (ONS 15310-CL) where format is OC12-[SLOT]-[PPM]-[PORT]

OC3-{2}-{1-2}-{1}

Facility AIDs for OC3 ports on the 15310-CL-CTX (ONS 15310-CL) where format is OC3-[SLOT]-[PPM]-[PORT]

T1-{2}-{1-21}

Facility AIDs for T1 ports on the 15310-CL-CTX (ONS 15310-CL) where format is T1-[SLOT]-[PORT]

T3-{2}-{1-3}

Facility AIDs for T3 ports on the 15310-CL-CTX (ONS 15310-CL) where format is T3-[SLOT]-[PORT]

VFAC-{1-4,11-14}-{1-4}-{1-4}-1

Facilities for the back end POS ports on the L1P_ETHERNET PORT on an ASAP Card. Applicable on the ONS15600 only. Format is VFAC-[SLOT]-[PIM]-[PPM]-[PORT]

VFAC-{1-6,12-17}-{0-1}

Facilities for the back end POS ports on the ML-Series card. Port numbering is 0-based (first POS port is VFAC-SLOT-0, second POS port is VFAC-SLOT-1). VC4, VC4-2C, VC4-3C, VC4-4C, VC4-8C for the ML1000 and ML100T Cards (ONS 15454). Format is VFAC-[SLOT]-[PORT]

VFAC-{1-6,12-17}-{1,2}

GFP facilities on the MXP-MR-2.5G and MXPP-MR-2.5G card

VFAC-{1-6,12-17}-{1,2}-{1,8}

GFP Client facilities for MXP-MR-2.5G and MXPP-MR-2.5G cards

VFAC-{1}-{0-1}

Facility AIDs for back end ports on the ML card (ONS 15310-CL), when provisioned in L2L3 mode. Format is VFAC-[SLOT]-[PORT]. Port numbering is 0-based

VFAC-{1}-{1-8}

Facility AIDs for back end ports on the ML card (ONS 15310-CL), when provisioned in L2L3 mode. Format is VFAC-[SLOT]-[PORT]. Port numbering is 1-based


4.5.15  IPADDR

IP Address

Table 4-30 IPADDR 

Pattern
Description

111.222.333.444

Standard 4 Part IP Address Notation

ALL

ALL


4.5.16  LINE

(Cisco ONS 15454 only)

The LINE AID is used to access the Optical Transport Section (OTS) layer of optical network units. Applicable only to ONS 15454 AD-1B-xx.x, AD-4B-xx.x, AD-1C-xx.x, AD-2C-xx.x, AB-4C-xx.x, OSC-CSM, OSCM, OPT-BST, OPT-PRE, 4MD-xx.x, 32MUX-O and 32DMX-O cards. The format is LINE-[SLOT]-[PORT]-[DIRECTION].

Table 4-31 LINE 

Values
Description

ALL

All of the OTSs of the NE. The ALL AID applies for retrieve-only commands

LINE-{1-6,12-17}-{1-2}-ALL

All the Lines in a OPT-PRE, OCS-CSM, AD-1B, AD-4B, AD-1C, AD-2C, AD-4C units

LINE-{1-6,12-17}-{1-2}-{RX,TX}

The receive/transmit Lines in a OPT-PRE, OCS-CSM, AD-1B, AD-4B, AD-1C, AD-2C, AD-4C units

LINE-{1-6,12-17}-{1-3}-ALL

All the Lines in a OPT-BST units

LINE-{1-6,12-17}-{1-3}-{RX,TX}

The receive/transmit Lines in a OPT-BST units

LINE-{8,10}-{1}-ALL

All the Lines in a OSCM units

LINE-{8,10}-{1}-{RX,TX}

The receive/transmit Lines in an OSCM units


4.5.17  LNKTERM

Link Termination AIDs that are used to access the termination points of a provisionable patchcord.

Table 4-32 LNKTERM 

Pattern
Description

ALL

Indicates all the provisionable patchcord terminations on a node. Applicable only for the retrieve commands

LNKTERM-ALL

Indicates all the provisionable patchcord terminations on a node. Applicable only for the retrieve commands

LNKTERM-{1-65535}

Indicates a single provisionable patchcord termination point on a node. Where format is LNKTERM-


4.5.18  OPM

OPM AIDs represent the single wavelength inside an optical power monitoring object

Table 4-33 OPM

Values
Description

OPM-{1-5,12-16}--{1530.33,1531.12,
1531.90,1532.68,1534.25,1535.04,
1535.82,1536.61,1538.19,1538.98,
1539.77,1540.56,1542.14,1542.94,
1543.73,1544.53,1546.12,1546.92,
1547.72,1548.51,1550.12,1550.92,
1551.72,1552.52,1554.13,1554.94,
1555.75,1556.55,1558.17,1558.98,
1559.79,1560.61}

The second index is the slot where the 32-WSS unit is configured. The last index of the wavelength is the value of the wavelength as described in OPTICAL_WLEN


4.5.19  OSC

(Cisco ONS 15454 only)

OSC AIDs are used to access the OSC of the NE

Table 4-34 OSC 

Values
Description

ALL

All of the OSCs of the NE. The ALL AID applies to the retrieve-only commands

OSC-RINGID

RINGID is a string of up to six characters, valid characters are [A-Z,0-9] (case insensitive)


4.5.20  PRSLOT

(Cisco ONS 15454 only)

Valid protection slots for the electrical cards

Table 4-35 PRSLOT 

Pattern
Description

NULL

Indicates there is no protection group. Used when trying to delete a protection group.

SLOT-1

The No.1 slot of an NE

SLOT-3

The No.3 slot of an NE

SLOT-5

The No.5 slot of an NE

SLOT-13

The No.13 slot of an NE

SLOT-15

The No.15 slot of an NE

SLOT-17

The No.17 slot of an NE


4.5.21  RFILE

File transfer type. Applicable to ONS 15454, 15327, and 15310-CL.

Table 4-36 RFILE

Pattern
Description

RFILE-DB

Transferring the system database

RFILE-PKG

Transferring a software package


4.5.22  STS

SONET frame-level AID set

STS AID Format for Optical and EC1 Facilities Without PPM: STS-[SLOT]-[PORT]-[STS]

STS AID Format for Optical Facilities With PPM: STS-[SLOT]-[PPM]-[PORT]-[STS]

STS AID Format for Optical Facilities With PIM and PPM: STS-[SLOT]-[PIM]-[PPM]-[PORT]-[STS]

STS AID Format for DS1 Electrical Facilities: STS-[SLOT]-[STS]

STS AID Format for DS3 (Except DS3I) Electrical Facilities: STS-[SLOT]-[PORT]-[STS]

STS AID Format for DS3I Electrical Facilities: STS-[SLOT]-[STS]

STS AID Format for G1000 Card GIGE Facilities: FAC-[SLOT]-[PORT]

Table 4-37 STS 

Pattern
Description

ALL

The ALL AID applies to the RTRV-only commands: RTRV-STS with ALL AID retrieves all STS interfaces on the NE. RTRV-STS1 with ALL AID retrieves all STS1 interfaces on the NE. RTRV-STS3c with ALL AID retrieves all STS3c interfaces on the NE.

FAC-{1-4,11-14}-{1-4}-{1-4}-{1}

Dynamically allocated STSs of all widths for the GIGE port on an ASAP Card. Format is FAC-[SLOT]-[PIM]-[PPM]-[PORT]

FAC-{1-6,12-17}-{1-4}

Dynamically allocated STSs of all widths for the G1000-4 card (ONS 15454). Format is FAC-[SLOT]-[PORT]

STS-{1-4,11-14}-{1-16}-1

STS48c AID for 16-Port OC48 (ONS 15600). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4,11-14}-{1-16}-ALL

All the STS of all path width on the 16-Port OC48 (ONS 15600). Format is STS-[SLOT]-[PORT]-ALL

STS-{1-4,11-14}-{1-16}-{1,13,25,37}

STS12C AID for 16-port OC48 (ONS 15600). Format is STS-[SLOT]-[PORT]-ALL

STS-{1-4,11-14}-{1-16}-{1,25}

STS24C AID for 16-Port OC48 (ONS 15600). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4,11-14}-{1-16}-{1,4,7,10,-,46}

STS3c AID for 16-Port OC48 (ONS 15600). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-1

STS192c AID for 4-Port OC192 (ONS 15600). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-ALL

All the STS of all path width on 4-Port OC192 (ONS 15600). Format is STS-[SLOT]-[PORT]-ALL

STS-{1-4,11-14}-{1-4}-{1,13,25,37,-,181}

STS12c AID for 4-Port OC192 (ONS 15600). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-{1,25,49,73,-,169}

STS24c AID for 4-Port OC192 (ONS 15600). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-{1,4,7,10,-,190}

STS3c AID for 4-Port OC192 (ONS 15600). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-{1,49,97,145}

STS48c AID for 4-Port OC192 (ONS 15600). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-{1,4}-{1}

StS3c AID for the ASAP Card with OC3 PORT provisioned. STS12C AID for the ASAP Card with OC12 Port Provisioned. STS48C AID for the ASAP Card with OC48 Port Provisioned. Format of AID is STS-[SLOT]-[PIM]-[PPM]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,13,25,37}

STS12C AID for the ASAP Card with OC48 Port Provisioned. Format is STS-[SLOT]-[PIM]-[PPM]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,25}

STS24C AID for the ASAP Card with OC48 Port Provisioned. Format is STS-[SLOT]-[PIM]-[PPM]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4,13,16,
25,28,37,40}

STS9C AID for the ASAP Card with OC48 Port Provisioned. Format is STS-[SLOT]-[PIM]-[PPM]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4,7,10,13,16,19,22,
25,28,31,34,37,40,43,46}

STS3C AID for the ASAP Card with OC48 Port Provisioned. Format is STS-[SLOT]-[PIM]-[PPM]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4,7}

STS6C AID for the ASAP Card with OC12 Port Provisioned. Format is STS-[SLOT]-[PIM]-[PPM]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1,4}

STS9C AID for the ASAP Card with OC12 Port Provisioned. Format is STS-[SLOT]-[PIM]-[PPM]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1-12}

STS1 AID for the ASAP Card with OC12 Port Provisioned. Format is STS-[SLOT]-[PIM]-[PPM]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1-3}

STS1 AID for the ASAP Card with OC3 Port Provisioned. Format is STS-[SLOT]-[PIM]-[PPM]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-{1,4}-{1}-{1-48}

STS1 AID for the ASAP Card with OC48 Port Provisioned. Format is STS-[SLOT]-[PIM]-[PPM]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-{1-4}-{1}-ALL

STS1,STS3C,6C,9C,12C,24C,48C AID for the ASAP Card with OCN Port Provisioned. Format is STS-[SLOT]-[PIM]-[PPM]-[PORT]-[STS]

STS-{1-4,11-14}-{1-4}-{1-4}-{1}-{1,4,7,13,16,19,25,28,
31,43}

STS6C AID for the ASAP Card with OC48 Port Provisioned. Format is STS-[SLOT]-[PIM]-[PPM]-[PORT]-[STS]

STS-{1-4,14-17}-{1-16}-{1-48}

STS1 AID for 16-Port OC48 (ONS 15600). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4,14-17}-{1-4}-1

STS12C aids for a 4-port OC12 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4,14-17}-{1-4}-ALL

All the STSs for a given 4-port OC12 card (OSN 15454). Format is STS-[SLOT]-[PORT]-ALL

STS-{1-4,14-17}-{1-4}-{1,4,7,10}

STS3C for the 4-port OC12 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4,14-17}-{1-4}-{1,4,7}

STS6C AIDs for a 4-port OC12 (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4,14-17}-{1-4}-{1-3}

STS1 AID for the 4-port OC3 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4,14-17}-{1-8}-1

STS3C for the 8-port OC3 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4,14-17}-{1-8}-ALL

All the STSs for a given 8-port OC3 card (ONS 15454). Format is STS-[SLOT]-[PORT]-ALL

STS-{1-4,14-17}-{1-8}-{1-3}

STS1 AID for the 8-port OC3 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4}-1-1

STS48c AID for 1-Port OC48 (ONS 15327). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4}-1-ALL

STS ALL AID for 1-Port Cards (ONS 15327). Format is STS-[SLOT]-ALL

STS-{1-4}-1-{1,13,25,37}

STS12c AID for 1-Port OC48 (ONS 15327). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4}-1-{1,4,7,10,-.,46}

STS3c AID for 1-Port OC48 (ONS 15327). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4}-1-{1,4,7,10}

STS3c AID for 4-Port OC3 and 1-Port OC12 (ONS 15327). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4}-1-{1,7,13,19,-,43}

STS6c AID for 1-Port OC48 (ONS 15327). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4}-1-{1,7}

STS6c AID for 1-Port OC12 (ONS 15327). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4}-1-{1-12}

STS1 AID for 4-Port OC3, 1-Port OC12
(ONS 15327). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-4}-1-{1-48}

STS1 AID for 1-Port OC48 (ONS 15327). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-1

STS1 AID for a DS1 card (ONS 15454). Format is STS-[SLOT]-[STS]. There is only 1 STS for the DS1 card

STS-{1-6,12-17}-1-1

STS12C AID for a 1-port OC12 card
STS48C AID for an OC48AS card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-1-ALL

All the STSs of an STS bandwidth on a single port optical card (ONS 15454). Format is STS-[SLOT]-[PORT]-ALL

STS-{1-6,12-17}-1-{1,13,25,37}

STS12C AIDs for an OC48AS card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-{1,4,10,13,16,19,25,28,37,40}

STS9C AID for an OC48AS card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-1-{1,4,7,10,13,16,19,22,25}

STS24C AID for an OC48AS card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-1-{1,4,7,10-46}

STS3C AID for an OC48AS card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-1-{1,4,7,10}

STS3C for a 1-port OC12 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-1-{1,4,7,13,16,19,25,28,37,40,43}

STS6C AID for an OC48AS card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-1-{1,4,7}

STS6C AID for an OC12 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-1-{1,4}

STS9C AID for a 1-port OC12 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-1-{1-12}

STS1 AID for a 1-port OC12 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-1-{1-48}

STS1 AID for an OC48AS card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-ALL

STS ALL AID for the card in the given slot
(ONS 15454). Format is STS-[SLOT]-[ALL]

STS-{1-6,12-17}-{1-12}-1

STS1 AID for EC1 and DS3 cards (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-{1-24}-1

STS1 AIDs for the DS3XM-12 STS12 backplane rate cards. Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-{1-36}-1

STS1 AIDs for the DS3XM-12 STS48 backplane rate cards. Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-{1-4}-1

STS3C AID for a 4-port OC3 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-{1-4}-ALL

All the STSs for a 4-port OC3 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-{1-4}-{1,4,7,10-46}

Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-{1-4}-{1,4,7}

STS6c AID for 4-Port OC12 (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-{1-4}-{1,4}

STS9C AID for a 4-port OC12 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-{1-4}-{1-12}

STS1 AID for a 4-port OC12 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{1-6,12-17}-{1-6}

STS1 AID for a DS3XM card (ONS 15454). Format is STS-[SLOT]-[STS]

STS-{2}-{1-2}-{1}-{1,4,7,10}

STS3c AID for the OC12 port (ONS 15310-CL). Format is STS-[SLOT]-[PPM]-[PORT]-[STS]

STS-{2}-{1-2}-{1}-{1,7}

STS6c AID for the OC12 port (ONS 15310-CL). Format is STS-[SLOT]-[PPM]-[PORT]-[STS]

STS-{2}-{1-2}-{1}-{1-12}

STS1 AID for the OC12 port (ONS 15310-CL). Format is STS-[SLOT]-[PPM]-[PORT]-[STS]

STS-{2}-{1-2}-{1}-{1-3}

STS1 AID for the OC3 port. Format is STS-[SLOT]-[PPM]-[PORT]-[STS]

STS-{2}-{1-2}-{1}-{1}

STS3c AID for the OC3 port, or STS9C AID for the OC12 port, or STS12c AID for the OC12 port (ONS 15310-CL). Format is STS-[SLOT]-[PPM]-[PORT]-[STS]

STS-{2}-{1-3}-{1}

STS1 AID for the 15310-CL-CTX T3 ports (ONS 15310-CL). Format is STS-[SLOT]-[PORT]-[STS]. The AIDs are port based and presented as 1 STS per port

STS-{2}-{1}

STS1 AID for the 15310-CL-CTX T1 port (ONS 15310-CL). Format is STS-[SLOT]-[STS]. There is only 1 STS for the WBE ports on the 15310-CL-CTX card

STS-{5,6,12,13}-1-1

STS48C AID for an OC48 card
STS192 AID for an OC192 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{5,6,12,13}-1-{1,13,25,37-180}

STS12C AID for an OC192 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{5,6,12,13}-1-{1,13,25,37}

STS12C AIDs for an OC48 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{5,6,12,13}-1-{1,4,7,10,13,16,19,22,25}

STS24C AID for an OC48 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{5,6,12,13}-1-{1,4,7,10-190}

STS3C for an OC192 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{5,6,12,13}-1-{1,4,7,10-46}

STS3C AID for an OC48 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{5,6,12,13}-1-{1,4,7,13,16,19,25,28,37,40,43}

STS6C AID for an OC48 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{5,6,12,13}-1-{1,49,97,145}

STS48C AID for an OC192 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{5,6,12,13}-1-{1-192}

STS1 AID for an OC192 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{5,6,12,13}-1-{1-48}

STS1 AID for an OC48 card (ONS 15454). Format is STS-[SLOT]-[PORT]-[STS]

STS-{5,6}-1

STS1 AID for XTC-14, XTC-28-3 for the T1 Port (ONS 15327). Format is STS-[SLOT]-[STS]. There is only 1 STS for the T1 ports

STS-{5,6}-{1-4}-1

STS1 on a DS3 port on the 327 XTC-28 card

STS-{5-6}-ALL

STS ALL AID for the T1 and T3 Ports within the XTC-14 and XTC-28-3 (ONS 15327). Format is STS-[SLOT]-ALL

VFAC-{1-6,12-17}-{0-1}

Virtual facility AIDs for the ML-Series cards back end POS ports. Both the ML1000-2 and ML100T-12 have two POS ports and are 0-based (ONS 15454). Format is VFAC-[SLOT]-[PORT]


4.5.23  SYN

Synchronization AIDs

Table 4-38 SYN 

Pattern
Description

SYNC-NE

NE sync AID


4.5.24  SYN_SRC

Synchronization source

Table 4-39 SYN_SRC 

Pattern
Description

BITS-1

Sync source is BITS-1. Format is BITS-[PORT] (ONS 15454, 15327, 15600, 15310-CL)

BITS-2

Sync source is BITS-2. Format is BITS-[PORT] (ONS 15454, 15327, 15600)

FAC-{1-4,11-14}-{1-16}

Sync Source is 16-Port OC48 (ONS 15600). Format is FAC-[SLOT]-[PORT]

FAC-{1-4,11-14}-{1-4}

Sync source is 4-Port OC192. Format is FAC-[SLOT]-[PORT]

FAC-{1-4}-1

Sync Source is the Optical Card (1-Port OC12, OC48) facility in ONS 15327. Format is FAC-[SLOT]-[PORT]

FAC-{1-4}-{1-4}

Sync Source is the Optical Card (4-Port OC3) facility in ONS 15327. Format is FAC-[SLOT]-[PORT]

FAC-{1-6,12-17}-{1-4}

Sync source is the optical card (four-port OC3 and four-port OC12) facility in ONS 15454. Format is FAC-[SLOT]-[PORT]

FAC-{1-6,12-17}-{1}

Sync source is the optical card (one-port OC12 and OC48AS) facility in ONS 15454. Format is FAC-[SLOT]-[PORT]

FAC-{5,6,12,13}-{1}

Sync source is the optical card (OC48,OC192) facility. Format is FAC-[SLOT]-[PORT]

INTERNAL

Set the SYN_SRC to be the system default value. The "Internal" value of the SYN_SRC is only applied for the SYNC-NE AID on the ED-SYNCN command

NONE

Set the SYNC_SRC value to the default value for BITS-OUT. The "NONE" value of SYNC_SRC only applies to the BITS-1 and BITS-2 AID of the ED-SYNCN command

OC12-{2}-{1-2}-{1}

Sync source is the OC12 facility (ONS 15310-CL). Format is OC12-[SLOT]-[PPM]-[PORT]

OC3-{2}-{1-2}-{1}

Sync source is the OC3 facility (ONS 15310-CL). Format is OC3-[SLOT]-[PPM]-[PORT]

SYNC-NE

SYNC-NE source. It is only used in the alarm report or alarm retrieve commands.

T1-{2}-{1-21}

Sync source is the T1 facility (ONS 15310-CL). Format is T1-[SLOT]-[PORT]


4.5.25  SYNC_REF

Synchronization AIDs

ONS 15454 Facility AID format for line timing:

Format for Optical Facilities Without PPM: FAC-[SLOT]-[PORT]

Format for Optical Facilities With PPM: FAC-[slot]-[PPM]-[PORT]

ONS 15600 Facility AID format for line timing:

Format for Optical Without PPM: FAC-[SLOT]-[PORT]

Format for Optical Facilities With PPM: FAC-[SLOT]-[PPM]-[PORT]

Format for Optical Facilities With PPM and PIM: FAC-[SLOT]-[PIM]-[PPM]-[PORT]

ONS 15310-CL Facility AID format for line timing:

Format for Optical Facilities With PPM: OCn-[SLOT]-[PPM]-[PORT] where n={3,12}

Format for DS1-Flavored Electrical Facilities: T1-[SLOT]-[PORT]

Table 4-40 SYNC_REF 

Pattern
Description

ALL

Equivalent to a combination of SYNC-ALL, BITS-1 and BITS-2. This AID is valid only for the commands RTRV-SYNCN, RTRV-ALM-SYNCN and RTRV-COND-SYNCN

SYNC-ALL

All synchronization references

SYNC-NE

NE sync AID

SYNC-{BITS1,BITS2}

BITS1 and BITS2 sync AIDs (not supported on the ONS 15310-CL)


4.5.26  SYNCSW

New synchronization reference that will be used

Table 4-41 SYNCSW 

Pattern
Description

INT

Internal clock. The "INT" value of the syncsw is only applied for the SYNC-NE AID on the OPR-SYNCSW command.

PRI

Primary timing reference

SEC

Secondary timing reference

THIRD

Third timing reference


4.5.27  UDC

(Cisco ONS 15454 only)

UDC AIDs for F-UDC and DCC-UDC channels on the AICI card. Applicable to ONS 15454. Applicable to ONS 15310-CL (F-UDC only).

Table 4-42 UDC 

Pattern
Description

ALL

ALL AID is applicable to RTRV-only commands, for example: RTRV-ALM/COND-UDCF and RTRV-ALM/COND-UDCDCC. It corresponds to a superset of F-UDC and DCC-UDC AIDs

UDC-{F,DCC}-{A,B}

F-UDC and DCC-UDC AIDs for A and B channels


4.5.28  VT

Virtual tributary. Applicable to ONS 15454 and 15327.

VT1 AID Format for Optical and EC1 Facilities Without PPM: VT1-[SLOT]-[PORT]-[STS]-[VTG]-[VTN]

VT1 AID Format for Optical Facilities With PPM: VT1-[SLOT]-[PPM]-[PORT]-[STS]-[VTG]-[VTN]

VT1 AID Format for DS1 Electrical Facilities: VT1-[SLOT]-[STS]-[VTG]-[VTN]

VT1 AID Format for DS3 Electrical Facilities: VT1-[SLOT]-[PORT]-[STS]-[VTG]-[VTN]

Table 4-43 VT 

Pattern
Description

ALL

The ALL AID applies to RTRV-only commands; for example, RTRV-VT and RTRV-VT1 with ALL AID returns all VT1 interfaces on the node

VT1-{1-4,14-17}-{1-8}-{1-3}-{1-7}-{1-4}

8-port OC3 card (ONS 15454)

VT1-{1-4}-1-{1-12}-{1-7}-{1-4}

VT AIDs for 1-Port OC12 (ONS 15327)

VT1-{1-4}-1-{1-48}-{1-7}-{1-4}

VT AIDs for 1-Port OC48 (ONS 15327)

VT1-{1-4}-{1-4}-{1-3}-{1-7}-{1-4}

VT AIDs for 4-Port OC3 (ONS 15327)

VT1-{1-6,12-17}-1-{1-12}-{1-7}-{1-4}

1-port OC12 card (ONS 15454)

VT1-{1-6,12-17}-1-{1-48}-{1-7}-{1-4}

OC48AS card (ONS 15454)

VT1-{1-6,12-17}-1-{1-7}-{1-2}

DS1 card (ONS 15454)

VT1-{1-6,12-17}-{1-12}-1-{1-7}-{1-4}

EC1 card (ONS 15454)

VT1-{1-6,12-17}-{1-24}-1-{1-7}-{1-4}

VT1.5 AIDs for DS3XM-12 STS12 backplane rate cards

VT1-{1-6,12-17}-{1-36}-1-{1-7}-{1-4}

VT1.5 AIDs for DS3XM-12 STS48 backplane rate cards

VT1-{1-6,12-17}-{1-4}-{1-12}-{1-7}-{1-4}

4-port OC12 card (ONS 15454)

VT1-{1-6,12-17}-{1-4}-{1-3}-{1-7}-{1-4}

4-port OC3 card (ONS 15454)

VT1-{1-6,12-17}-{1-6}-{1-7}-{1-4}

DS3XM-6 card (ONS 15454)

VT1-{2}-{1-2}-{1}-{1-12}-{1-7}-{1-4}

VT1 AIDs for OC3 Port on a 15310-CL-CTX card (ONS 15310-CL)

VT1-{2}-{1-2}-{1}-{1-3}-{1-7}-{1-4}

VT1 AIDs for OC3 Port on a 15310-CL-CTX card (ONS 15310-CL)

VT1-{2}-{1-3}-{1}-{1-7}-{1-4}

VT1 AIDs for BBE Port on a 15310-CL-CTX card (ONS 15310-CL). The AIDs are port based and presented as 1 STS per port. VTs are supported only for EC1 ports

VT1-{2}-{1}-{1-7}-{1-3}

VT1 AIDs for T1 (WBE) Port on a 15310-CL-CTX card (ONS 15310-CL). There is only 1 STS for the WBE ports on the 15310-CL-CTX card. There are 7 VT groups that each have 3 VTs within

VT1-{5,6,12,13}-1-{1-192}-{1-7}-{1-4}

OC192 Card (ONS 15454)

VT1-{5,6,12,13}-1-{1-48}-{1-7}-{1-4}

OC48 Card (ONS 15454)

VT1-{5-6}-1-{1-7}-{1-2}

VT AIDs for T1 Port within XTC-14 (ONS 15327). There is only 1 STS for the T1 ports within the XTC-14 card

VT1-{5-6}-1-{1-7}-{1-4}

VT AID for T1 Port with XTC-28-3 (ONS 15327). There is only 1 STS for the T1 ports within the XTC-28 card

VT2-{1-4,14-17}-{1-8}-{1-3}-{1-7}-{1-3}

8-port OC3 card (ONS 15454)

VT2-{1-6,12-17}-1-{1-12}-{1-7}-{1-3}

1-port OC12 card (ONS 15454)

VT2-{1-6,12-17}-1-{1-48}-{1-7}-{1-3}

OC48AS card (ONS 15454)

VT2-{1-6,12-17}-{1-4}-{1-12}-{1-7}-{1-3}

4-port OC12 card (ONS 15454)

VT2-{1-6,12-17}-{1-4}-{1-3}-{1-7}-{1-3}

4-port OC3 card (ONS 15454)

VT2-{5,6,12,13}-1-{1-192}-{1-7}-{1-3}

OC192 Card (ONS 15454)

VT2-{5,6,12,13}-1-{1-48}-{1-7}-{1-3}

OC48 card (ONS 15454)


4.5.29  WDMANS

(Cisco ONS 15454 only)

This AID is used to access the AONS application of the NE.

Table 4-44 WDMANS 

Pattern
Description

AONS-{E,W}

Automatic Optical Node Setup identifier (is per ring direction based)

WDMANS-{E,W}

Automatic Optical Node Setup identifier (is per ring direction based)


4.5.30  WLEN

(Cisco ONS 15454 only)

This AID represents the single wavelength inside an external facility. If the facility is of type OTS (line) the wavelengths contained are all the available in the node: currently 32. If the facility is of type OCH (CHAN) the wavelength is just one and it is the same of the correspondent wavelength customized for that channel.

Table 4-45 WLEN 

Pattern
Description

WLEN-{E,W}-{ADD,DROP,EXP}-{1530.33,1531.12,1531.90,
1532.68,1534.25,1535.04,1535.82,1536.61,1538.19,1538.98,1539.77,
1540.56,1542.14,1542.94,1543.73,1544.53,1546.12,1546.92,,1547.72,
1548.51,1550.12,1550.92,1551.72,1552.52,1554.13,1554.94,
1555.75,1556.55,1558.17,1558.98,1559.79,1560.61}

Wavelength identifier


4.6  Parameter Types

This section provides a description of all message parameter types defined for the TL1 messages used in the ONS SONET 15454, 15327, 15310-CL, and 15600. Individual parameters are listed within each command description in "TL1 Command Descriptions".

4.6.1  ATAG Description

The autonomous message tag (ATAG) is used for message sequencing. There are four streams of autonomous messages and each stream corresponds to a sequence. The sequence numbers increment by one for each autonomous message within that stream. The format and range of ATAG differs for each stream. The four streams are:

1. Alarmed events:

These include REPT ALM and REPT EVT (except REPT EVT SESSION) messages as well as the REPT SW autonomous message.

ATAG Format: x.y
where
x - sequence number of this alarmed event. This is an integer in the range of 0-9999.
y - sequence number of the previous alarmed event which is related to this alarmed event. This is an integer in the range of 0-9999.

If there is no such previous related event, then y will be the same as x. For example, the first time an alarm is raised you will receive the autonomous message:

TID-000 1998-06-20 14:30:00
* 1346.1346 REPT ALM T1
"FAC-1-1:MN,LOS,NSA,,,,:\"Loss Of Signal\",DS1-14"
;

When this alarmed event/condition is cleared, you will receive the autonomous message:

TID-000 1998-06-20 14:31:00
A 1349.1346 REPT ALM T1
"FAC-1-1:CL,LOS,NSA,,,,:\"Loss Of Signal\",DS1-14"
;

2. Database change messages:

The REPT DBCHG message falls into this category.

ATAG Format: x
where:
x - sequence number of the database change update message. This is an integer in the range of 0-9999. For example:

TID-000 1998-06-20 14:30:00
A 96 REPT DBCHG
"TIME=18-01-05,DATE=1970-01-01,SOURCE=2,USERID=CISCO15,
DBCHGSEQ=96:ENT-EQPT:SLOT-3"
;


Note The ATAG is the same as the DBCHGSEQ field in the REPT DBCHG output.


3. PM Reports:

The REPT PM messages fall into this category.

ATAG format: x
where:
x - sequence number of the PM report. This is an integer in the range of 0-9999. For example:

TID-000 1998-06-20 14:30:00
A5 REPT PM DS1
"FAC-3-1:CVL,10,PRTL,NEND,BTH,15-MIN,05-25,14-46"
;

This sequence number is global across all existing PM schedules.

4. Autonomous messages specific to a TL1 session. These messages are usually related to the security aspect of the TL1 session. Only the autonomous messages REPT EVT SESSION and CAN fall under this category. This is an integer in the range 0-9999.

For example:

TID-000 1998-06-20 14:30:00
A 1 CANC
"User"
;

4.6.2  CTAG Description

The correlation tag (CTAG) is included in each command by the user and is repeated by the
NE in the response to allow the user to associate the command and response messages. The valid values for a CTAG are strings of up to 6 characters comprised of identifiers (alphanumeric, beginning with a letter) or non-zero decimal numbers (a string of decimal digits with an optional non-trailing ".").

A zero in the response field is valid when indicating an error; for example, issuing a semi-colon by itself results in:

TID-000 1998-06-20 14:30:00
M 0 DENY IISP
/* Input, Garbage */
;

4.6.3  TID Description

The TID is the name of the NE where the command is addressed. TID is the Telcordia name for the system.

4.6.4  Parameter Notes

1. If a parameter is set to a value that is inconsistent with something already in the database, and that value is not changed to a consistent value then the command will be denied.

2. If a parameter is set to a value that is consistent with what is already in the database, but another parameter in the same command is incompatible, then the command will be denied.

3. The correct way to issue a command where parameters may be in conflict is to:

a. First issue that command and change all relevant parameters to compatible values,

b. Then issue the command again to change the target values.

For example, OC-N is syncmsg=y, to change SDH to y, ED-OCN needs to be called to set syncmsg=N, then called again to set SDH=y.

4. The attribute defaults have also been presented under RTRV commands, and they can be retrieved only if the RTRV commands follow the card/entity original provision.

5. The default for an optional field of an ED command is either the provisioned default value or the last provisioned value in the previous ED command.