Network MIB

Table Of Contents

Network MIB

Network Table

Access Methods

Node Table

Access Methods

Node Group—Scalar Objects

Access Method

Trunk Table

Access Methods

Example Query

Circuit Line Table

Trap Config Group

Trap Config Table

Trap Upload Table

Trap Group—Scalar Objects

Traps

Virtual Switch Table

VSI Resource Partition Table

Network MIB

---

This appendix provides a detail description of the Network MIB and its associated tables and access methods. The following topics are included:

•Network Table

•Node Table

•Node Group—Scalar Objects

•Trunk Table

•Circuit Line Table

•Trap Config Group

•Virtual Switch Table

•VSI Resource Partition Table

Network Table

This section describes the Network table (svNetworkTable). This table lists all networks being managed by CWM. The table is indexed by network name, and contains the CWM ID assigned to the network, as well as the network domain ID. The network name and the network CWM ID must be configured in the /usr/users/svplus/config/network.conf file.

Table B-1 svNetworkTable 

MIB Object	Related Node Types	Description	Values
svNetworkName	Not applicable.	Name of the network as assigned by the CWM user. Access: read-only.	The value returned by the RtmProxy is a string whose size can be 0 to 10 characters.
svNetworkId	Not applicable.	Unique ID of the network as assigned by the CWM system. Access: read-only.	The unique ID specified in network.conf + 1. Integer value starting from 1.
svNetworkIpxId	Not applicable.	IPX network ID. Access: read-only.	—

Access Methods

The RtmProxy does not validate the community string for the Network table.

To obtain a list of all network names, perform an SNMP Walk on the svNetworkName object using the following query format.

SNMP GETNext Query Format:

OID: 1.3.6.1.4.1.351.1.100.2.1.1.1

Name: svNetworkName

Community: public (RtmProxy ignores the community string for this object).

Type			: DisplayString

Example Query (using HP OpenView snmpwalk):

> snmpwalk -p 8161 nm20fst7 svNetworkName

stratacom.svplus.topologyGroup.svNetworkGroup.svNetworkTable.svNetworkEntry.svNetworkName.
8.78.101.116.119.111.114.107.49 : DISPLAY STRING- (ascii): Network1

stratacom.svplus.topologyGroup.svNetworkGroup.svNetworkTable.svNetworkEntry.svNetworkName.
8.78.101.116.119.111.114.107.50 : DISPLAY STRING- (ascii):  Network2

To obtain the Network ID for a given network name, perform an SNMP GET on the networkId object using the following query format:

OID: 			1.3.6.1.4.1.351.1.100.2.1.1.2.$NetworkName

where, $NetworkName is the encoded form of the network name.

Name:			 svNetworkId

Community:			 public (RtmProxy ignores the community string for this object).

Type:			 Integer

Example Query:

The following query obtains the network ID for the network "Network1":

> snmpGET -p 8161 -c public nm20fst7 svNetworkId.8.78.101.116.119.111.114.107.49

stratacom.svplus.topologyGroup.svNetworkGroup.svNetworkTable.svNetworkEntry.svNetworkId.8.
78.101.116.119.111.114.107.49 : INTEGER: 1

Node Table

This section describes the Node table (svNodeTable). This table contains a list of all nodes (routing and feeder) managed and monitored by CWM. The Network MIB does not provide enough information to distinguish between a routing node and a feeder node.

The svNodeTable is indexed by svNodeNetworkName and svNodeName.

Table B-2 svNodeTable 

MIB Object	Related Node Types	Description	Values
svNodeNetworkName	Not applicable.	The name of the network to which this node is attached. Access: read-only.	The value returned by the RtmProxy is a string from 0 to 10 characters.
svNodeName	IPX BPX 8600 IGX 8400 MGX 8220 MGX 8230 MGX 8250 MGX 8850 DAS DNS BPX SES INSD MC3810	The IPX node name. Access: read-only.	The value returned by the RtmProxy is a string from 0 to 32 characters.

Access Methods

The RtmProxy does not validate the community string for the Node table.

To obtain a list of all nodes managed by CWM, perform an SNMP Walk on svNodeName. To obtain a list of nodes in a particular network, perform an SNMP Walk on svNodeName.$Network, where $Network is the encoded form of the network name.

The example in this section uses the following set up for an SNMP GETNext Query Format:

•OID: 1.3.6.1.4.1.351.1.100.1.20.1.2.$NetworkName

where, $NetworkName is encoded form of the network name.

•Name: svNodeName

•Community: public (ignored)

•Type: DisplayString

The following query obtains the list of all nodes in the network: "Network1".

> snmpwalk -p 8161 -c public nm20fst7 svNodeName.8.78.101.116.119.111.114.107.49

stratacom.svplus.topologyGroup.svNodeGroup.svNodeTable.svNodeEntry.svNodeName.8.78.101.116
.119.111.114.107.49.7.97.120.105.115.49.53.56 : DISPLAY STRING- (ascii): axis158

stratacom.svplus.topologyGroup.svNodeGroup.svNodeTable.svNodeEntry.svNodeName.8.78.101.116
.119.111.114.107.49.7.97.120.105.115.49.54.53 : DISPLAY STRING- (ascii): axis165

stratacom.svplus.topologyGroup.svNodeGroup.svNodeTable.svNodeEntry.svNodeName.8.78.101.116
.119.111.114.107.49.7.97.120.105.115.50.53.48 : DISPLAY STRING- (ascii): axis250

stratacom.svplus.topologyGroup.svNodeGroup.svNodeTable.svNodeEntry.svNodeName.8.78.101.116
.119.111.114.107.49.8.110.109.115.98.112.120.48.49 : DISPLAY STRING- (ascii): nmsbpx01

stratacom.svplus.topologyGroup.svNodeGroup.svNodeTable.svNodeEntry.svNodeName.8.78.101.116
.119.111.114.107.49.8.110.109.115.98.112.120.48.56 : DISPLAY STRING- (ascii): nmsbpx08

stratacom.svplus.topologyGroup.svNodeGroup.svNodeTable.svNodeEntry.svNodeName.8.78.101.116
.119.111.114.107.49.8.110.109.115.98.112.120.48.57 : DISPLAY STRING- (ascii): nmsbpx09

stratacom.svplus.topologyGroup.svNodeGroup.svNodeTable.svNodeEntry.svNodeName.8.78.101.116
.119.111.114.107.49.8.110.109.115.98.112.120.49.49 : DISPLAY STRING- (ascii): nmsbpx11

Node Group—Scalar Objects

The svNodeGroup contains a set of scalar objects in addition to the tables: svTrunkTable, lineTable, and svNodeTable. These objects specify certain characteristics of the node, such as the node alarm state, platform type (BPX 8600, IGX 8400, MGX 8800 series, or MGX 8220), and ForeSight increase and decrease rates.

The Node Group—Scalar Objects provide information by node;

they require community strings of the form <Networkname>.<Nodename> to access the proper instance of the objects. (See Table B-3.)

Table B-3 svNodeGroup 

MIB Object	Related Node Types	Description	Value
svNodeGrpName	IPX IGX 8400 MGX 8220 BPX 8600 MGX 8800 series C3810	Node group name. Access: read-only.	The value returned by the RtmProxy is a string from 0 to 32 characters.
svNodeGrpNetName	IPX IGX 8400 MGX 8220 BPX 8600 MGX 8800 series C3810	The name of the network to which the node is attached. Access: read-only.	The value returned by the RtmProxy is a string from 0 to 10 characters.
svNodeGrpAlarmState	IPX IGX 8400 MGX 8220 BPX 8600 MGX 8800 series C3810	Node alarm state. Only low 6 bits are valid. Access: read-only.	clear (1) minor (2) major (3) unreachable (4)
svNodeGrpGateway	IPX(R) IGX 8400(R) BPX 8600 MGX 8800 series	Specifies whether this node is acting as a gateway. Access: read-only.	not-a-gateway (1) gateway (2)
svNodeGrpActive	IPX IGX 8400 MGX 8220 BPX 8600 MGX 8800 series C3810	Specifies whether this node is currently active or inactive. Access: read-only.	—
svNodeGrpPlatform	IPX IGX 8400 MGX 8220 BPX 8600 MGX 8800 series C3810	Platform type of the node. Access: read-only.	ipx-platform (1) bpx-platform (2) igx-platform (3) axis-platform (4) ins-platform (5) vns-platform (6) insd-platform (7) esp-platform (13) c3810-platform (14) MGX8850 (PXM1)- platform (15) MGX 8850 (PXM45) - platform (16)
svNodeModel	IPX IGX 8400 MGX 8220 BPX 8600 MGX 8800 series C3810	Model number of a switch/node. The model number is defaulted to 0 when unavailable. Access: read-only.	String from 0 to 32 characters
svNodeGrpFiltered AlarmState	IPX IGX 8400 MGX 8220 BPX 8600 MGX 8800 series C3810	Node filtered alarm state. Access: read-only.	1 = clear 2 = minor 3 = major 4 = unreachable 5 = critical 6 = notSupported
svNodeGrpRelease	IPX IGX 8400 MGX 8220 BPX 8600 MGX 8800 series C3810	Release version of the CWM software. Access: read-only.	String from 0 to 10 characters
svNodeFsIncRate	IPX IGX 8400 BPX 8600 MGX 8800 series	Node ForeSight increase rate. Access: read-only.	—
svNodeFsDecRate	IPX IGX 8400 BPX 8600 MGX 8800 series	Node ForeSight normal decrease rate. Access: read-only.	—
svNodeFsFastRate	IPX IGX 8400 BPX 8600 MGX 8800 series	Node ForeSight fast decrease rate. Access: read-only.	—
svNodeRstTimeout	IPX IGX 8400 BPX 8600	Timeout (in seconds) for resetting PVC rate to QIR. Access: read-only.	—
svNodeSubtype	—	The node subtype such as routing node, feeder node, or standalone node. Access: read-only.	routing-node (1) feeder-node (2) access-node (3) standalone node (5)
svNodeId	—	Unique node ID assigned by CWM to a node in the network. The svNodeId remains the same even when the node is deleted and added back to the network, as long as the CWM database is not cleared. Also, when CWM is warm started (without clearing the database), the CWM node ID remains unchanged. Access: read-only.	—
svNodeOldName	—	Name previously assigned to the node. This information is passed when a node name is changed and a corresponding trap generated by CWM remains unchanged. Access: read-only.	String from 0-32 characters
svNodeOldIpAddress	—	IP address previously assigned to the node. svNodeOldIpAddress is used in the trap to indicate a node's IP address has changed. Access: read-only.	—
svNodeIpAddress	—	IP address of a node in the CWM network. Access: read-only.	—

---

Note The svNodeSubtype, svNodeId, svNodeOldName, svNodeOldIpAddress, and svNodeIpAddress objects are used for traps only and no values are returned by snmpGET.

---

Access Method

The scalar objects in the Node Group can be accessed using the SNMP GET command. These objects require a community string of the form

<networkname>.<nodename>

where <networkname> is the network name to which node <nodename> is attached.

The following mechanism allows reading of the Node Alarm state for all the nodes in all networks:

1. Perform SNMP Walk on svNetworkName to obtain the list of network names.

2. For each network, perform an SNMP Walk on svNodeName.$Network to obtain a list of nodes in a network (where $Network is the encoded form of the network name).

3. For each node perform an SNMP GET on svNodeGrpAlarmState.0 with community <networkname>.<nodename>.

The example in this section uses the following SNMP GET query format:

•OID: 1.3.6.1.4.1.351.1.100.1.7.0

•Name: svNodeGrpAlarmState

•Community: <networkname>.<nodename>

•Type: Integer

The following query obtains the alarm state of the node nmsipx03 in the network Network1:

> snmpGET -p 8161 -c "Network1.nmsipx03" nm20fst7 svNodeGrpAlarmState.0

stratacom.svplus.topologyGroup.svNodeGroup.svNodeGrpAlarmState.0 : INTEGER: minor

Trunk Table

The Trunk table (svTrunkTable) contains the list of all trunk lines in the network. (See Table B-4.)This table provides the information on a per node basis. Therefore, nodal community of the form <networkname>.<nodename> must be used the in the queries. The trunk table provides the remote node information as NodeId. The CWM Network MIB does not have a mechanism to map NodeId to the corresponding Node name.

The Trunk table is indexed by svTrunkLocalSlot, svTrunkLocalPort, and svTrunkLocalVtrkId.

Table B-4 svTrunkTable 

MIB Object	Related Node Types	Description	Values
svTrunkLocalSlot	IPX IGX 8400 BPX 8600 MGX 8800 series	Slot number of the local end (numbered starting at 1). Access: read-only.	Integer starting from 1.
svTrunkLocalPort	IPX IGX 8400 BPX 8600 MGX 8800 series	Local port number (numbered starting at 1). Access: read-only.	Integer starting from 1.
svTrunkLocalLine	IPX IGX 8400 BPX 8600 MGX 8800 series	Line number of the local end (numbered starting at 1). Unique logical line numbers reported by IPX/BPX /IGX nodes. Access: read-only.	Integer starting from 1.
svTrunkCardType	IPX IGX 8400 BPX 8600 MGX 8850	Card type supporting the trunk line. The card type is dependent on the value of node platform. Access: read-only.	The enumerated values for the card type field have the following format: CARD-IF-PORTS-MODE where: CARD = card type IF = interface type PORTS = number of ports MODE = media Mode Modes can be one of the following: mmf - multi mode fiber smf - single mode fiber snm - mixed mode smflr - single mode fiber long range Enumerated values are: txr (3) bni (4) ntc (22) atm (31) ait (34) uxm (41) bni-t3 (103) bni-e3 (104) bni-oc3 (110) bxp (117) BXM 117 (kept for backward compatibility). Following is a list of BXM cards. The enums are used directly from software interface without any mapping. Terms: smf: Single Mode Fiber mmf: Multi Mode Fiber smflr: SingleModeFiberLongrange snm - Mixed Mode bxm-t3-8-smf (180) bxm-t3-8-mmf (181) bxm-t3-8-smflr (182) bxm-t3-8-snm (183)
svTrunkCardType (continued)	IPX IGX 8400 BPX 8600 MGX 8850	Card type supporting the trunk line. The card type is dependent on the value of node platform. Access: read-only.	bxm-e3-8-smf (188) bxm-e3-8-mmf (189) bxm-e3-8-smflr (190) bxm-e3-8-snm (191) bxm-t3-12-smf (184) bxm-t3-12-mmf (185) bxm-t3-12-smflr 186) bxm-t3-12-snm (187) bxm-e3-12-smf (192) bxm-e3-12-mmf (193) bxm-e3-12-smflr (194) bxm-e3-12-snm (195) bxm-oc3-4-smf (196) bxm-oc3-4-mmf (197) bxm-oc3-4-smflr (198) bxm-oc3-4-snm (199) bxm-oc3-8-smf (200) bxm-oc3-8-mmf (201) bxm-oc3-8-smflr (202) bxm-oc3-8-snm (203) bxm-oc12-1-smf (204) bxm-oc12-1-mmf (205) bxm-oc12-1-smflr (206) bxm-oc12-1-snm (207) bxm-oc12-2-smf (208) bxm-oc12-2-mmf (209) bxm-oc12-2-smflr (210) bxm-oc12-2-snm (211) bme-oc12-1-smf (212) bme-oc12-1-mmf (213) bme-oc12-1-smflr (214) bme-oc12-1-snm (215) bme-oc12-2-smf (216) bme-oc12-2-mmf (217) bme-oc12-2-smflr (218) bme-oc12-2-snm (219) bxm-oc3-4-stm1e (220) bxm-oc3-8-stm1e (221) bxm-oc3-4-xlr (222) bxm-oc3-8-xlr (223) bxm-oc12-1-xlr (224) bxm-oc12-2-xlr (225) bxm-t3-12-enh (226) bxm-e3-12-enh (227) bxm-oc3-4-smf-enh (228) bxm-oc3-4-mmf-enh (229) bxm-oc3-4-smflr-enh (230)
svTrunkCardType (continued)	IPX IGX 8400 BPX 8600 MGX 8850	Card type supporting the trunk line. The card type is dependent on the value of node platform. Access: read-only.	bxm-oc3-4-stm1e-enh (231) bxm-oc3-4-xlr-enh (232) bxm-oc3-8-smf-enh (233) bxm-oc3-8-mmf-enh (234) bxm-oc3-8-smflr-enh (235) bxm-oc3-8-stm1e-enh (236) bxm-oc3-8-xlr-enh (237) bxm-oc12-1-smf-enh (238) bxm-oc12-1-mmf-enh (239) bxm-oc12-1-smflr-enh (240) bxm-oc12-1-xlr-enh (241) bxm-oc12-2-smf-enh (242) bxm-oc12-2-mmf-enh (243) bxm-oc12-2-smflr-enh (244) bxm-oc12-2-xlr-enh (245) bme-oc12-1-smf-enh (246) bme-oc12-2-smf-enh (247) bme-oc12-2-smflr-enh (248) bme-oc12-2-snm-enh (249)
svTrunkInterface	IPX IGX 8400 BPX 8600 MGX 8850	Trunk line interface type. Indicates the format of the packet line. Access: read-only.	Enumerated values are: unknown (1) t1 (2) e1 (3) subrate (4) oc3 (5) oc12 (6) t3 (7) e3 (8) broadband (9)
svTrunkLineLoad	IPX IGX 8400 BPX 8600 MGX 8850	Line load in packets per second. Access: read-only.	—
svTrunkRemNodeId	IPX IGX 8400 BPX 8600 MGX 8850	Remote CWM node ID. Access: read-only.	—
svTrunkRemLineNumber	IPX IGX 8400 BPX 8600 MGX 8850	Remote line number. Access: read-only.	—
svTrunkRemSlot	IPX IGX 8400 BPX 8600 MGX 8850	Slot number of the remote end. Access: read-only.	—
svTrunkRemPort	IPX IGX 8400 BPX 8600 MGX 8850	Remote port number. Access: read-only.	—
svTrunkAlarmState	IPX IGX 8400 BPX 8600 MGX 8850	Trunk line alarm state. Access: read-only.	clear (1) minor (2) major (2)
svTrunkActive	IPX IGX 8400 BPX 8600 MGX 8850	Trunk active state. Access: read-only.	—
svTrunkStatus	IPX IGX 8400 BPX 8600 MGX 8850	Trunk line status. Access: read-only.	inactive (1) clear (2) fail (3) down (4)
svTrunkStatReserve	IPX IGX 8400 BPX 8600 MGX 8850	Trunk line statistical reserve field. Access: read-only.	—
svTrunkBurstyDataBQDepth	IPX IGX 8400 BPX 8600 MGX 8850	Trunk line bursty data B (Frame Relay with ForeSight traffic data) queue depth. Access: read-only.	—
svTrunkBurstyDataBQEfcnThreshold	IPX IGX 8400 BPX 8600 MGX 8850	Trunk line bursty data B (Frame Relay with ForeSight traffic data) queue EFCN/EFCI threshold. Access: read-only.	—
svTrunkClpHighDropThreshold	IPX IGX 8400 BPX 8600 MGX 8850	Trunk line CLP high dropping threshold. Access: read-only.	—
svTrunkClpLowDropThreshold	IPX IGX 8400 BPX 8600 MGX 8850	Trunk line CLP low dropping threshold. Access: read-only.	—
svTrunkLocalVtrkId	IPX IGX 8400 BPX 8600 MGX 8850	Local virtual trunk ID. These are numbered starting at 1. Value 255 when no virtual trunk is defined. Access: read-only.	—
svTrunkRemVtrkId	IPX IGX 8400 BPX 8600 MGX 8850	Remote virtual trunk ID. These are numbered starting at 1. Access: read-only.	—
svTrunkRemNodeName	IPX IGX 8400 BPX 8600 MGX 8850	Remote end node name. Access: read-only.	String from 0 to 32 characters

Access Methods

The objects in the Trunk table require a community string of the form <networkname>.<nodename>

where <networkname> is the network to which node <nodename> is attached.

To obtain the list of all trunks attached to a node, perform an SNMP Walk on svTrunkTable.

Example Query

The following example uses the node name nmsbpx01 in the network Network1.

> snmpwalk -p 8161 -c "Network1.nmsbpx01" nm20fst7 svTrunkTable

stratacom.svplus.topologyGroup.svNodeGroup.trunkGroup.svTrunkTable.svTrunkEntry.svTrunkLoc
alSlot.3.1.255 : INTEGER: 3

stratacom.svplus.topologyGroup.svNodeGroup.trunkGroup.svTrunkTable.svTrunkEntry.svTrunkLoc
alSlot.3.2.255 : INTEGER: 3

stratacom.svplus.topologyGroup.svNodeGroup.trunkGroup.svTrunkTable.svTrunkEntry.svTrunkLoc
alPort.3.1.255 : INTEGER: 1

stratacom.svplus.topologyGroup.svNodeGroup.trunkGroup.svTrunkTable.svTrunkEntry.svTrunkLoc
alPort.3.2.255 : INTEGER: 2

stratacom.svplus.topologyGroup.svNodeGroup.trunkGroup.svTrunkTable.svTrunkEntry.svTrunkLoc
alLine.3.1.255 : INTEGER: 1

stratacom.svplus.topologyGroup.svNodeGroup.trunkGroup.svTrunkTable.svTrunkEntry.svTrunkLoc
alLine.3.2.255 : INTEGER: 2

stratacom.svplus.topologyGroup.svNodeGroup.trunkGroup.svTrunkTable.svTrunkEntry.svTrunkCar
dType.3.1.255 : INTEGER: bni-e3

stratacom.svplus.topologyGroup.svNodeGroup.trunkGroup.svTrunkTable.svTrunkEntry.svTrunkCar
dType.3.2.255 : INTEGER: bni-e3

stratacom.svplus.topologyGroup.svNodeGroup.trunkGroup.svTrunkTable.svTrunkEntry.svTrunkInt
erface.3.1.255 : INTEGER: e3

Circuit Line Table

The Circuit Line table (lineTable) contains read-only configuration information about the specified IPX node's circuit lines, and is indexed by circuit line number and port number. This table is supported only for IGX 8400/IPX card types: CDP, CIP, FRP, and TXR.

Table B-5 lineTable 

MIB Object	Related Node Types	Description	Values
lineLineNumber	IPX IGX 8400	Circuit line number (for MGX 8850 and IPX it is same as slot number). For physical lines it gives the unique physical line number per card. For example, for trunk 11.4 the value will be 4.	—
lineCardType	IPX IGX 8400	Circuit card type. Access: read-only.	Enumerated values are: txr (3) cip (21) frp (25) cdp (29) uxm (41) asi-t3-2 (106) asi-e3-2 (107) asi-oc3-smf (110) asi-oc3-mmf (111) bxm (117) (kept for backward compatibility) Following is the list of BXM cards. The enums are directly used from Switch SW interface without any mapping: smf Single Mode Fiber mmf Multi Mode Fiber smflr Single Mode Fiber Long Range snm Mixed Mode bxm-t3-8-smf (180) bxm-t3-8-mmf (181) bxm-t3-8-smflr (182) bxm-t3-8-snm (183) bxm-t3-12-smf (184) bxm-t3-12-mmf (185) bxm-t3-12-smflr (186) bxm-t3-12-snm (187) bxm-e3-8-smf (188) bxm-e3-8-mmf (189) bxm-e3-8-smflr (190) bxm-e3-8-snm (191) bxm-e3-12-smf (192) bxm-e3-12-mmf (193) bxm-e3-12-smflr (194) bxm-e3-12-snm (195) bxm-oc3-4-smf (196) bxm-oc3-4-mmf (197) bxm-oc3-4-smflr (198) bxm-oc3-4-snm (199) bxm-oc3-8-smf (200) bxm-oc3-8-mmf (201) bxm-oc3-8-smflr (202) bxm-oc3-8-snm (203) bxm-oc12-1-smf (204) bxm-oc12-1-mmf (205)
lineCardType (continued)	IPX IGX 8400	Circuit card type. Access: read-only.	bxm-oc12-1-smflr (206) bxm-oc12-1-snm (207) bxm-oc12-2-smf (208) bxm-oc12-2-mmf 209) bxm-oc12-2-smflr (210) bxm-oc12-2-snm (211) bme-oc12-1-smf (212) bme-oc12-1-mmf (213) bme-oc12-1-smflr (214) bme-oc12-1-snm (215) bme-oc12-2-smf (216) bme-oc12-2-mmf (217) bme-oc12-2-smflr (218) bme-oc12-2-snm (219) -- new bxm cards introduced in 9.1 bxm-oc3-4-stm1e (220) bxm-oc3-8-stm1e (221) bxm-oc3-4-xlr (222) bxm-oc3-8-xlr (223) bxm-oc12-1-xlr (224) bxm-oc12-2-xlr (225) bxm-t3-12-enh (226) bxm-e3-12-enh (227) bxm-oc3-4-smf-enh (228) bxm-oc3-4-mmf-enh (229) bxm-oc3-4-smflr-enh (230) bxm-oc3-4-stm1e-enh (231) bxm-oc3-4-xlr-enh (232) bxm-oc3-8-smf-enh (233) bxm-oc3-8-mmf-enh (234) bxm-oc3-8-smflr-enh (235) bxm-oc3-8-stm1e-enh (236) bxm-oc3-8-xlr-enh (237) bxm-oc12-1-smf-enh (238) bxm-oc12-1-mmf-enh (239) bxm-oc12-1-smflr-enh (240) bxm-oc12-1-xlr-enh (241) bxm-oc12-2-smf-enh (242) bxm-oc12-2-mmf-enh (243) bxm-oc12-2-smflr-enh (244) bxm-oc12-2-xlr-enh (245) bme-oc12-1-smf-enh (246) bme-oc12-2-smf-enh (247) bme-oc12-2-smflr-enh (248) bme-oc12-2-snm-enh (249) unknown (10000)
lineInterface	IPX IGX 8400	Type of the line interface. Access: read-only.	Enumerated values are: t1 (1) oc3 (4) e1 (5) e3 (8) t3 (9) oc12 (10) unknown (200)
lineActive	IPX IGX 8400	Circuit line active state. Access: read-only.	—
lineStatus	IPX IGX 8400	Circuit line status. Access: read-only.	inactive(1) clear(2) fail(3) down(4)
linePortNumber	IPX IGX 8400	Port number. For physical lines it is the same as the trunk number. For example, for IMA trunk 11.2-5 for all physical lines 2, 3, 4, and 5, the port number is 2 which is the trunk number for IMA trunk 11.2-5. Access: read-only.	—

Trap Config Group

The objects in the trapsConfig Group provide access to the Robust Trap Mechanism (RTM) of CWM. This group contains two tables: trapConfigTable and trapUploadTable. The Trap Config Group also contains the scalar objects shown in Table B-6.

Table B-6 trapsConfig 

MIB Object	Related Node Types	Description	Values
managerNumOfValidEntries	Not applicable.	The number of Managers in the Trap Configuration table registered to receive traps. The maximum number of Managers allowed to register for traps is 16 (with one reserved for CWM). Access: read-only.	Range: 1-16
lastSequenceNumber	Not applicable.	The sequence number of the last trap generated on the CWM RtmProxy. Access: read-only.	Not applicable

Trap Config Table

The Trap Config table (trapConfigTable) contains the list of all Managers subscribed for the Robust Traps from CWM. (See Table B-7.) Using the objects in this table, you can register for Robust Traps, SET asynchronous trap retrieval mode, and SET normal trap reception mode.

The trapConfigTable is indexed by managerIpAddress.

Table B-7 trapConfigTable 

MIB Object	Description	Values
managerIPaddress	Manager IP address. Access: read-write.	Value returned is in ASN.1 IP Address format.
managerPortNumber	Manager port number. This is the UDP port number on which Manager is receiving traps. Default value: 162. Access: read-write.	—
managerRowStatus	When RowStatus is set to addRow (1), the Manager is registered with the Proxy to receive the new traps generated. Access: read-write.	addRow (1) delRow (2)
readingTrapFlag	SET by the Manager to indicate it is retrieving missing traps. During registration, this flag should be SET to false. When this flag is SET to true, RTM Service Agent does not forward traps asynchronously to the Manager. Access: read-write.	false (1) true (2)
nextTrapSeqNum	SET this object to the sequence number of the trap to be retrieved. If this object is SET to negative number (-n) traps that were SET by RtmProxy will be retrieved back and previous traps that were sent by RtmProxy before manager is registered. n should be greater than 1. Access: read-write.	—
trapFilterRegisterCategory	The categories of traps that a client registers with RTMProxy. The trap categories are: bit 0 SET = Node Object Alarm Status Change Traps bit 1 SET = Node Object Config Status Change Traps bit 2 SET = Peripheral Object Alarm Status Change Traps bit 3 SET = Peripheral Object Configuration Status Change Traps bit 4 SET = Card Object Alarm Status Change Traps bit 5 SET = Card Object Configuration Status Change Traps bit 6 SET = Trunk Object Alarm Status Change Traps bit 7 SET = Trunk Object Configuration Status Change Traps bit 8 SET = Line Object Alarm Status Change Traps bit 9 SET = Line Object Configuration Status Change Traps bit 10 SET = Port Object Alarm Status Change Traps bit 11 SET = Port Object Configuration Status Change Traps bit 12 SET = UserConnection Object Alarm Status Change Traps bit 13 SET = UserConnection Object Configuration Status Change Traps bit 14 SET = ProtocolGroups Object Alarm Status Change Traps bit 15 SET = ProtocolGroups Object Configuration Status Change Traps bit 16 SET = LinkStation Object Alarm Status Change Traps bit 17 SET = LinkStation Object Configuration Status Change Traps bit 18 SET = SNA Routes Object Alarm Status Change Traps bit 19 SET = SNA Routes Object Configuration Status Change Traps bit 20 SET = Network Connectivity Status Change Traps bit 21 SET = Automatic Protection Switching (APS) Traps bit 22 SET = SCM Health Monitor Traps bit 23 SET = Virtual Switch Interface Traps bit 24 SET = Reliability, Availability, Serviceability (R&S) Traps bit 25 SET = STG Tarps for IOS-based devices. For example, when a client is interested in receiving only Node, Card, and Trunk Object Status Change traps, trapFilterRegisterCategory is SET to 0x0b. Then, no other Object Status Change traps such as for Port and Line are sent to the client. The default value is to register for all trap categories.	0x0000000000000000 - 0xffffffffffffffff (Octet string of range 0 through 8) Default value: 0xffffffffffffffff
trapRedeliverFlag	Flag to trigger whether or not traps are redelivered.	false (1) true (2)
managerNumOf ValidEntries	The number of managers in the table that are programmed to receive traps.	1 - 16
lastSequenceNumber	The sequence number of the last trap generated on the SNMP Proxy for a manager.	—

Trap Upload Table

The trapUploadTable is used by the SNMP manager to recover the lost traps from the RtmProxy. The following table describes the trapUpload objects.

Table B-8 trapUploadTable 

MIB Object	Description	Values
mgrIpAddress	Manager IP address. Access: read-only.	—
trapSequenceNum	The sequence number associated with the trap. Access: read-only.	—
trapPduString	The PDU String associated with the trap. Access: read-only.	—
endofQueueflag	The end of Queue associated with the trap. Access: read-only.	false (1) true (2)

Trap Group—Scalar Objects

In addition to the tables described in previous sections, the aagTrapGroup also contains a SET of scalar objects allowing you to obtain additional trap information in a simplified manner.

Table B-9 aagTraps Group  

MIB Objects	Description	Values
trapSeverity	The severity of the trap generated from the Asynchornous Alarm Generator (AAG) alarm. Access: Read only.	clear (1) warning (2) minor (3) major (4) critical (5) info (6)
trapReason	The string describing why the trap was generated. Used to provide more detailed information on the cause of the trap. This field is SET to the trap number for all releases prior to the 8.4 switch software release. Access: read-only.	Enumerated values for lines and trunks: ok (1) deactivated (2) activated (3) bipolar-violations (4) tx-voice-packets-dropped (5) tx-ts-packets-dropped (6) tx-bda-packets (7) tx-bdb-packets (8) frames-slips (9) frames-bit-errors (10) packet-out-of-frames (11) out-of-frames (12) losses-of-signal (13) bad-clock-errors (14) crc-errors (15) tx-nts-packets (16) packet-crc-errors (17) out-of-multi-frames (18) all-ones-in-timeslot-16 (19) line-code-violations (20) line-parity-errors (21) path-parity-errors (22) bip-8-code-violations (23) rx-voice-pkts-dropped (24) rx-ts-pkts-dropped (25) rx-bda-pkts-dropped (26) rx-bdb-pkts-dropped (27) rx-nts-pkts-dropped (28) rx-hi-pri-pkts-dropped (29) atm-cell-header-hec-errs (30) frame-sync-errors (31) rx-spacer-pkts-drpd (32) bad-clock-path (33) bad-clock-source (34) communication-failure (35) looped-back (36) remote-cga (37) remote-framing (38) rmt-oom (39) remote-alarm (40) remote-yellow (41) remote-e3-ferf (42) path-yellow (43) rmt-oof (44) local-cga (45) frame-sync-alarm (46)
trapReason (continued)	The string describing why the trap was generated. Used to provide more detailed information on the cause of the trap. This field is SET to the trap number for all releases prior to the 8.4 switch software release. Access: read-only.	out-of-mfm (47) loss-of-cell (48) loss-of-pointer (49) path-ais(50) ais-16 (51) out-of-pkt-frm (52) frm-err-rate (53)ais (54) out-of-frm (55) loss-of-signal (56) bad-clock (57) txr-missing (58) pic-missing (59) backcard-missing (60) pic-cip-missing (61) ntc-missing (62) cdp-missing (63) frp-missing (64) atm-missing (65) bni-t3-missing (66) bni-e3-missing (67) asi-t3-missing (68) asi-e3-missing (69) ait-missing (70) asi0-t3-missing (71) asi0-e3-missing (72) asi-oc3-missing (73) bni-oc3-missing (74) ftc-missing (75) bxm-missing (76) btm-hp-missing (77) path-trace-failure (78) section-trace-failure (79) cgw-discard-pkts (80) cgw-discard-cells (81) tx-hp-cells-dropped (83) tx-vbr-cells-dropped (84) tx-ubr-abr-cells-dropped (85) tx-cbr-cells-dropped (86) rmt-path-trace-failure (91) rmt-section-trace-failure (92) qbin-tx-nts-cells-discarded (93) qbin-tx-hi-pri-cells-discarded (94) qbin-tx-voice-cells-discarded (95) qbin-tx-ts-cells-discarded (96) qbin-tx-bdata-a-cells-discarded (97) qbin-tx-bdata-b-cells-discarded (98) qbin-tx-vbr-cells-discarded (99) qbin-tx-abr-cells-discarded (100) qbin-tx-cbr-cells-discarded (101) inverse-mux-failure (102)
trapReason (continued)	The string describing why the trap was generated. Used to provide more detailed information on the cause of the trap. This field is SET to the trap number for all releases prior to the 8.4 switch software release. Access: read-only.	inverse-mux-link-disabled (103) front-card-missing (104) card-mismatch (105) comm-break-node-degraded (997) comm-break-clear (998) comm-break-alarm (999) The following enums are applicable to ports: port-communication-failure (1001) communication-failure-cleared (1002) ftc-communication-failure (1003) ftc-communication-failure-cleared (1004) The following enums are applicable to connections: connection-failed (2001) connection-down (2002) connection-clear (2003) The following enums are applicable to cards: programming-aborted (3001) failure-cleared (3002) intermittent-failure (3003) failed (3004) failed-no-backup-available (3005) failed-activated-backup (3006) missing-card-freed (3007) removed (3008) removed-no-backup-available(3009) removed-activated-failed-backup(3010) failed-card-removed (3011) failed-card-removed-no-backup-available(3012) failed-card-removed-activated-failed-backup(3013) hardware-failure(3014) hardware-failure-no-backup-available(3015) hardware-failure-activated-backup(3016) hardware-failure-activated-failed-backup(3017) failed-due-to-hardware-failure (3018) failed-due-to-hardware-failure-no-backup-available(3019) failed-due-to-hardware-failure-activated-backup(3020) failed-due-to-hardware-failure-activ-failed-backup(3021) power-supply-monitor-hardware-failure (3022)
trapReason (continued)	The string describing why the trap was generated. Used to provide more detailed information on the cause of the trap. This field is SET to the trap number for all releases prior to the 8.4 switch software release. Access: read-only.	failed-power-supply-monitor-hardware-failure(3023) asm-hardware-failure(3024) card-inserted (3025) failed-card-inserted(3026) power-supply-monitor-failure-cleared(3027) asm-failure-cleared(3028) power-supply-monitor-intermittent-failure(3029) asm-intermittent-failure(3030) power-supply-monitor-failed(3031) asm-failed(3032) -- power-supply-monitor-hardware-failure (3033) -- asm-hardware-failure(3034) power-supply-monitor-inserted(3035) asm-inserted(3036) power-supply-monitor-removed (3037) failed-power-supply-monitor-removed(3038) asm-removed(3039) failed-asm-removed(3040) bus-failed (3041) bus-failed-no-backup-available (3042) bus-failed-activated-backup (3043) bus-failed-activated-failed-backup (3044) card-not-responding(3045) failed-card-freed (3046) card-freed (3047) card-sar-failure (3048) card-sar-clear (3049) card-up-failure (3050) card-up-clear (3051) card-arbiter-failure (3052) card-arbiter-clear (3053) bcc-card-fail (3056) controlcard-restarted (3068) controlcard-restarted-probe-reSET (3069) controlcard-restarted-system-reSET (3070) controlcard-restarted-powerfailure (3071) controlcard-restarted-watchdog-timeout (3072) controlcard-restarted-software-abort (3073) controlcard-restarted-switchover (3074) controlcard-restarted-clear-all-config (3075) controlcard-restarted-user-reSET-request (3076)
trapReason (continued)	The string describing why the trap was generated. Used to provide more detailed information on the cause of the trap. This field is SET to the trap number for all releases prior to the 8.4 switch software release. Access: read-only.	controlcard-restarted-reSET-request (3077) controlcard-restarted-reSET-bus-diagnostics (3078)controlcard-restarted-bus-diagnostics (3079) controlcard-restarted-manual-bus-diagnostics controlcard-restarted-clear-partial-config (3082) (3080) controlcard-restarted-bus-diag-cc-switch (3081) controlcard-restarted-cc-failure (3083) controlcard-restarted-incomplete-nvc-memory (3084) controlcard-restarted-primary-revision-change (3085) controlcard-restarted-revision-change (3086) controlcard-restarted-bad-crc (3087) controlcard-restarted-completed-download (3088) controlcard-restarted-configuration-restoral (3089) controlcard-restarted-soft-reSET (3090) controlcard-restarted-rebuild-fail (3091) controlcard-restarted-y-redundancy-alarm (3092) controlcard-restarted-cc-redundancy-alarm (3093) -- Following enums are for slot alarm reported by switch in card alarm: standby-PRBS-err (3094) rx-invalid-port-err (3095) poll-A-parity-err (3096) poll-B-parity-err (3097) bad-grant-err (3098) tx-bip-16-err (3099) rx-bip-16-err (3100) bframe-parity-err (3101) siu-phase-err (3102) rx-fifo-sync-err (3103) polling-clock-err (3104) clock-192-err (3105) suspected-card-failure (3106) -- The following enums are applicable to peripherals: power-supply-clear (4001)
trapReason (continued)	The string describing why the trap was generated. Used to provide more detailed information on the cause of the trap. This field is SET to the trap number for all releases prior to the 8.4 switch software release. Access: read-only.	power-supply-failed (4002) power-supply-removed (4003) failed-power-supply-removed (4004) pwer-supply-hardware-failure (4005) power-supply-inserted (4006) cabinet-fans-alarm (4007) cabinet-temperature-alarm (4008) cabinet-fan-alarm-cleared (4009) cabinet-temperature-alarm-cleared (4010) dc-voltage-alarm (4011) dc-voltage-alarm-cleared (4012) bus-clear (4013) control-bus-failed (4014) cell-or-mux-bus-failed (4015) clock-bus-failed (4016) standby-clock-bus-failed (4017) comm-bus-failed (4018) polling-bus-failed (4019) external-clock-los (4020) external-clock-bad-source (4021) external-clock-clear (4022) external-clock-deactivated (4023) invalid-login-alarm (4024) invalid-login-alarm-cleared (4025) cpu-utilization-alarm (4026) cpu-utilization-alarm-cleared (4027) memory-utilization-alarm (4028) memory-utilization-alarm-cleared (4029) control-bus-need-diagnostics (4030) -- The following enums are applicable to feeders: ipx-fdr-communication-failure (5001) axis-fdr-communication-failure (5002) ipx-hub-communication-failure (5003) bpx-hub-communication-failure (5004) igx-hub-communication-failure (5013) popeye-fdrtrk-comm-failure (5019) popeye-fdrtrk-alarm-cleared (5020) popeye-fdrtrk-majororminor-alarm (5021) The following enums are applicable to APS: aps-card-protocol-mismatch (7000) aps-red-prot-bkcd-missing-mismatch (7001) aps-red-work-bkcd-missing-mismatch (7002)
trapReason (continued)	The string describing why the trap was generated. Used to provide more detailed information on the cause of the trap. This field is SET to the trap number for all releases prior to the 8.4 switch software release. Access: read-only.	aps-1plus1-prot-hw-frcd-missing (7003) aps-1plus1-work-hw-frcd-missing (7004) aps-1plus1-hw-frcd-missing (7005) aps-half-chans-frcd-param-mismatch (7006) aps-fw-missing-prot-cd (7007) aps-fw-missing-work-cd (7008) aps-card-missing (7010) aps-card-mismatch (7013) aps-active (7019) aps-clear (7020) aps-deactivated (7021) aps-line-loop-in-process (7022) aps-remote-signal-fail-onstby-line (7023) aps-channel-mismatch (7024) aps-prot-switch-byte-failed (7025) aps-farend-prot-line-failed (7026) aps-config-mismatch-btwn-2-ends (7027) aps-signal-degrade-bit-error (7028) aps-signal-failure-bit-error (7029) aps-clear-revertive-switch (7040) aps-revertive-switch-failed (7041) aps-manual-switch (7042) aps-manual-switch-failed (7043) aps-signal-degrade-low-prior-switch (7044) aps-signal-degrade-low-prior-switch-failed (7045) aps-signal-degrade-hi-prior-switch (7046) aps-signal-degrade-hi-prior-switch-failed (7047) aps-signal-fail-low-prior-switch(7048 aps-signal-fail-low-prior-switch-failed (7049) aps-signal-fail-hi-prior-switch (7050) aps-signal-fail-hi-prior-switch-failed (7051) aps-forced-switch (7052) aps-forced-switch-failed (7053) aps-lockout-of-prot-other-end (7054) aps-lockout-of-prot-other-end-failed (7055) aps-wait-to-restore-switch (7056) aps-wait-to-restore-switch-failed (7057) aps-exercise-switch (7058) aps-exercise-switch-failed (7059) aps-reverse-request-switch (7060) aps-reverse-request-switch-failed (7061) aps-line-stby-lof (7080) aps-stby-line-los (7081)
trapReason (continued)	The string describing why the trap was generated. Used to provide more detailed information on the cause of the trap. This field is SET to the trap number for all releases prior to the 8.4 switch software release. Access: read-only.	aps-do-not-revert-switch (7062) aps-do-not-revert-switch-failed (7063 aps-stby-line-secondary-trc (7070) aps-stby-line-path-trc (7071) aps-line-path-yellow (7072) aps-stby-line-path-ais (7073) aps-stby-line-lop (7074) aps-stby-line-loc (7075) aps-stby-line-plcp-yellow (7076) aps-stby-line-plcp-lof (7077) aps-stby-line-yellow (7078) aps-line-stby-ais (7079)
trapConnEndPointString	This object has both the local and remote endpoint description of the connection in the following formats: For Frame Relay connections: <lslot>.<lport>.<lDLCI>-<rslot>.<rport>.<rDLCI> For ATM connections: <lslot>.<lport>.<lVPI><lVCI>-<rslot>.<rport>.<rVPI><rVCI> For FastPad connections: <lslot>.<lport>.<lfpdslot><lfpdport><lfpdDLCI>- <rslot>.<rport>.<rfpdslot><rfpdport><rfpdDLCI> Access: read-only.	—
trapLineIdString	This object has the following format for various ports: <slot>.<port> for multi port cards (for example, ASI) and <slot>.255 for single port cards (for example, FRP). <slot>.<trk#>.<line> for physical lines. Access: read-only.	—
trapTrunkType	Indicates the type of the trunk. Access: read-only.	unknown (1) physical-trunk (2) virtual-trunk (3) feeder-trunk (4) ima-trunk (5) ima-virtual-trunk (6) ima-feeder-trunk (7)
trapVirtualTrunkId	Virtual trunk ID. Access: read-only.	For virtual trunks the value can be 1-254. For physical trunks the value reported is 255.
trapTrunkIdString	This object contains values in the following formats: <slot>.<port>.<vtrkid> for virtual trunks and <slot>.<port>.255 for physical trunks. Access: read-only.	—
trapPortIdString	This object has the following format for various ports: <slot>.<line>.<port> for multi port cards (for example, ASI). <slot> for single port cards (for example, CDP/VDP). For ASI/FRP ports, line=0. Access: read-only.	—
trapCardStatus	The alarm status of the card. Access: read-only.	clear (1) (refers to Empty state on the CLI) failed (2) down (3) standby (4) mismatch (5) failed-no-backup (6) Following are the new values introduced in 9.1.02XX no-card (7) (refers to Empty state on the CLI) update(8) cleared (9) (a transient state when card is inserted but not ready) unavailable (10) downloading (11) downloader (12) downloaded (13) locked (14) program (15) upgrading (16) upgraded (17) frozen (18)
trapCardType	The specific card type from which the trap is generated. Access: read-only.	ipx-pcc (1) vdp (2) txr (3) pic (4) vcd (5) vdp-vcd (6) psm (7) ps (8) sdp (9) bslot (10) mback (11) sdp-back-cd (12) txr2 (13) xdp (14) ldp (15) xdp-back-cd (16) ldp-back-cd (17) sback-cd (18) lback-cd (19) fdp (20) cip (21) ntc (22) uback-cd (23) uni (24) frp (25) fback-cd (26) frp-back-cd (27) mt3 (28) cdp (29) e1t1-port (30) atm (31) npc (32) arc (33) ait (34) ftc (35) ftcback-cd (36) ufm1 (37) ufm1-u (38) btm-hp (39) bcc (101) asm (102) bni-t3 (103) bin-e3 (104) mfrp (105) asi-t3-2 (106) asi-e3-2 (107) asi0-t3 (108)
trapCardType (continued)	The specific card type from which the trap is generated. Access: read-only.	asi0-e3 (109) bni-oc3 (110) asi-oc3 (111) bpx-bslot (112) bcc3 (113) unknown (114) bxm (117) (kept for backward compatibility) Following is the list of BXM cards. The enums are directly used from the switch SW interface without any mapping: smf Single Mode Fiber mmf Multi Mode Fiber smflr Single Mode Fiber LongRange snm Mixed Mode bxm-t3-8-smf (180) bxm-t3-8-mmf (181) bxm-t3-8-smflr (182) bxm-t3-8-snm (183) bxm-t3-12-smf (184) bxm-t3-12-mmf (185) bxm-t3-12-smflr (186) bxm-t3-12-snm (187) bxm-e3-8-smf (188) bxm-e3-8-mmf (189) bxm-e3-8-smflr (190) bxm-e3-8-snm (191) bxm-e3-12-smf (192) bxm-e3-12-mmf (193) bxm-e3-12-smflr (194) bxm-e3-12-snm (195) bxm-oc3-4-smf (196) bxm-oc3-4-mmf (197) bxm-oc3-4-smflr (198) bxm-oc3-4-snm (199) bxm-oc3-8-smf (200) bxm-oc3-8-mmf (201) bxm-oc3-8-smflr (202) bxm-oc3-8-snm (203) bxm-oc12-1-smf (204) bxm-oc12-1-mmf (205) bxm-oc12-1-smflr (206) bxm-oc12-1-snm (207) bxm-oc12-2-smf (208) bxm-oc12-2-mmf (209) bxm-oc12-2-smflr (210) bxm-oc12-2-snm (211)
trapCardType (continued)		bme-oc12-1-smf (212) bme-oc12-1-mmf (213), bme-oc12-1-smflr (214) bme-oc12-1-snm (215) bme-oc12-2-smf (216) bme-oc12-2-mmf (217) bme-oc12-2-smflr (218) bme-oc12-2-snm (219) bxm-oc3-4-stm1e (220) bxm-oc3-8-stm1e (221) bxm-oc3-4-xlr (222) bxm-oc3-8-xlr (223) bxm-oc12-1-xlr (224) bxm-oc12-2-xlr (225) bxm-t3-12-enh (226) bxm-e3-12-enh (227) bxm-oc3-4-smf-enh (228) bxm-oc3-4-mmf-enh (229) bxm-oc3-4-smflr-enh (230) bxm-oc3-4-stm1e-enh (231) bxm-oc3-4-xlr-enh (232) bxm-oc3-8-smf-enh (233) bxm-oc3-8-mmf-enh (234) bxm-oc3-8-smflr-enh (235) bxm-oc3-8-stm1e-enh (236) bxm-oc3-8-xlr-enh (237) bxm-oc12-1-smf-enh (238) bxm-oc12-1-mmf-enh (239) bxm-oc12-1-smflr-enh (240) bxm-oc12-1-xlr-enh (241) bxm-oc12-2-smf-enh (242) bxm-oc12-2-mmf-enh (243)
trapCardType (continued)		bxm-oc12-2-smflr-enh (244) bxm-oc12-2-xlr-enh (245) bme-oc12-1-smf-enh (246) bme-oc12-2-smf-enh (247) bme-oc12-2-smflr-enh (248) bme-oc12-2-snm-enh (249)
trapCardSlotNumber	The slot number of the card. Access: read-only.	—
trapPeripheralType	The peripheral type on which the trap is generated. Access: read-only.	unknown (1) power-supply (2) cabinet-fan (3) local-bus (4) temperature-sensor (5) dc-voltage-monitor (6) external-clock-source (7) invalid-login-monitor (8)
trapPeripheralStatus	The alarm status of the peripheral. Access: read-only.	clear (1) failed (2)
trapPeripheralUnitNumber	The unit number of the peripheral on which trap is generated. Different types of peripheral units are listed below: Power Supply (IPX): 1-4 Power Supply (IGX 8400): 1-6 Power Supply (BPX 8600): 1-2 Cabinet Temp Sensor: 1 Fan (IGX 8400): 1 Fan (BPX 8600): 1-3 DC Voltage Monitor (IGX 8400): 1 DC Voltage Monitor (BPX 8600): 1-2 Bus B Bus: 1 A Bus: 2 External Clock Source: EXT-1 1.544MHz: 1 EXT-1 2.048MHz: 2 EXT-2 1.544MHz: 3 EXT-2 2.048MHz: 4 Invalid Login Monitor: 1 Access: read-only.	—
trapFeederStatus	The alarm status of the feeder. Access: read-only.	clear (1) failed (2)
trapPhysicalLineIdString	Indicates the list of physical lines associated with an IMA trunk. Different physical lines in the IMA group are delimited by dots. Access: read-only.	String from 1 to 15 characters
trapCommBreakNode	Name of the node to which commBreak has occurred. Access: read-only.	String from 0 to 32 characters
trapCommBreakRptNode	Name of the node which reported the commBreak. Access: read-only.	String from 0 to 32 characters
trapOccurTime	Indicates the time the event occurred in the following format: <MM/DD/YY HH:MM:SS> Access: read-only.	—
trapMsgFormatTime	Indicates the time of event message prepared on the switch. Format for this variable is: <MM/DD/YY HH:MM:SS> Access: read-only.	—
trapTimeZone	Indicates the time zone associated with times for the trap. Access: read-only.	—
trapSeverityStr	Indicates the severity of the trap. Access: read-only.	—
trapMsgStr	Message text associated with the trap. Access: read-only.	String from 1 to 255 characters
trapSvStationName	Name of the CWM workstation where the trap is generated. Access: read-only.	String from 0 to 32 characters
trapSvStationIpAddress	IP address of the CWM Workstation. Access: read-only.	—
trapSvProcessName	Name of the CWM process which was terminated or restarted. Access: read-only.	String from 0 to 64 characters
trapSvProcessId	The Process ID of the CWM process which was terminated. Access: read-only.	—
trapSvProcessRestartCount	Count of the number of times a CWM process restarted. Access: read-only.	—
trapDbFullThreshold	Indicates the threshold percentage setting for database full. Access: read-only.	String from 1 to 100 characters
trapDbPercentFreeSpace	Current free DB space percentage. Access: read-only.	String from 1 to 100 characters
trapDiskSpaceLowThreshold	Indicates the threshold percentage setting for free disk space low. Access: read-only.	String from 1 to 100 characters
trapAvailableMegaByte	Current /usr/users partition free disk spaces in megabytes. Access: read-only.	—
trapTftpErrorType	Describes the type of TFTP error: daemon (1) indicates the error was generated by the CWM daemon process. system (2) indicates the error was generated due to UNIX system errors. node (3) indicates the error was generated on the node from which the file was received. Access: read-only.	daemon (1) system (2) node (3)
trapTftpErrorDetail	Describes the type of TFTP error with more detailed information. Access: read-only.	String from 0 to 255 characters
trapSvChildProcessNumber	The child process number of a CWM process which was restarted. For non-child process, it is defaulted to 0. Access: read-only.	—
trapStatsFileName	The name of the statistics file containing the statistics data from a node. Access: read-only.	String from 1 to 128 characters
trapBackCardType	Back card type reported by the switch. Access: read-only.	Back card types for IPX, IGX 8400, and BPX 8600: rs232-bcd (1) rs449-bcd (2) v35-bcd (3) rs232d-bcd (4) rs232-8-bcd (5) rs232-4-bcd (6) friv35-4-bcd (7) e1-bcd (8) t1-bcd (9) pccb-bcd (10) dds-4-bcd (11) dds-8-bcd (12) sr-bcd (13) mt3-bcd (14) fri-e1-bcd (15) fri-t1-bcd (16) j1-bcd (17) y1-bcd (18) ipx-t3-bcd (19) ipx-e3-bcd (20) fri-x21-bcd (21) ari-bcd (22) ait-t3-bcd (23) ait-e3-bcd (24) ftiv35-4-bcd (25) fti-x21-bcd (26) fti-e1-bcd (27) fti-t1-bcd (28) ait-e2-bcd (29) ait-hssi-bcd (30) ufi-t1d-bcd (31) ufi-e1d-bcd (32) ufi-e1b-bcd (33) ufi-hssi-bcd (34) ufi-v35-bcd (35) ufi-x21-bcd (36) btm-hp-t3-bcd (37) btm-hp-e3-bcd (38) bcc-bcd (101) lm-asm-bcd (102) t3-bcd (103) e3-bcd (104) t3-2-bcd (105) e3-2-bcd (106)
trapBackCardType (continued)	Back card type reported by the switch. Access: read-only.	smf-bcd (107) mmf-bcd (108) bcclm2-bcd (109) stm1-bcd (110) utp-bcd (111) stp-bcd (112) mnch-bcd (113) smflr-bcd (114) unkwn-bcd (115) init-bcd (116) uai-4oc3-mmf (150) uai-4oc3-smf (151) uai-2oc3-smf (152) uai-6t3 (153) uai-3t3 (154) uai-6e3 (155) uai-3e3 (156) uai-8t1-ima (157) uai-8e1-ima-db15 (158) uai-8e1-ima-bnc (159) uai-4t1-ima (160) uai-4e1-ima-db15 (161) uai-4e1-ima-bnc (162) uai-4stm1 (163)
apsLineIString	This object has both the trunk and line formats. For line: <slot>.<line> for multi port cards (for example, ASI) and <slot> for single port cards (for example, CDP/VDP). For ASI/FRP ports line=0. For trunk: <slot>.<port>.<vtrkid> for virtual trunks and <slot>.<port>.255 for physical trunks. Access: read-only.	String from 1 to 255 characters
apsWorkSlot	The Working Line slot number of the APS configured line pair. Access: read-only.	—
apsWorkLine	The Working Line line number of the APS configured line pair. Access: read-only.	—
apsProtectSlot	The Protection Line slot number of the APS configured line pair. Access: read-only.	—
apsProtectLine	The Protection Line line number of the APS configured line pair. Access: read-only.	—
apsInterface	The interface of the APS configured line pair. Access: read-only.	line (1) trunk (2)
apsActiveLine	The active line of the APS configured line pair; either the working line or protection line. Access: read-only.	working line (1) protection line (2)
oldTrapReason	The previous APS alarm on this APS line before a clear trap is received. Access: read-only.	—
trapSvStationRole	The role of a CWM workstation. Access: read-only.	primary (1) secondary (2)
trapSvPeerStationName	Name of the peer CWM workstation for CWM-CWM communication related traps. Access: read-only.	Display string 0-32

Traps

Table B-10 provides a list of CWM generated traps.

Table B-10 Traps 

Trap Name	Description	Varbinds
svUserConnCleared	The user connection has recovered from a failed/downed state after the CWM database was in sync with the network. This trap is now obsolete. Trap number: 25010	lastSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnRemoteEndPt svConnRemoteStr svConnAlarmRemoteEndNNI svConnOpStatus svConnAbitStatus svConnAISStatus svConnOAMLoopbackStatus svConnType
svUserConnFailed	The user connection has failed after the CWM database was in sync with the network. This trap is now obsolete. Trap number: 25011	lastSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnRemoteEndPt svConnRemoteStr svConnAlarmRemoteEndNNI svConnOpStatus svConnAbitStatus svConnAISStatus svConnOAMLoopbackStatus svConnType
svUserConnDown	The user connection has been downed after the CWM database was in sync with the network. Trap number: 25012	lastSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnRemoteEndPt svConnRemoteStr svConnAlarmRemoteEndNNI svConnOpStatus svConnAbitStatus svConnAISStatus svConnOAMLoopbackStatus svConnType
The following are IPX/IGX/BPX traps.
connectionAlarm	This trap is generated whenever a connection alarm status is received. Trap number: 20000	lastSequenceNumber svNodeGrpName trapSeverity trapReason svConnOpStatus svConnType trapConnEndPointString
lineAlarm	This trap is generated whenever a line alarm status is received. Trap number: 20001	lastSequenceNumber svNodeGrpName trapSeverity trapReason lineStatus lineCardType lineInterface lineLineNumber linePortNumber trapLineIdString
trunkAlarm	This trap is generated whenever a trunk alarm status is received. Trap number: 20002	lastSequenceNumber svNodeGrpName trapSeverity trapReason svTrunkStatus svTrunkCardType trapTrunkType svTrunkLocalSlot svTrunkLocalPort trapVirtualTrunkId trapTrunkIdString
portAlarm	This trap is generated whenever a port alarm status is received. (The svPortPort object continues to refer to logical port.) For UFM, svPortPort refers to logical port whereas svPortPhysicalPort refers to the first DS0 used in the Port TimeSlot bitmap. For example, a UFM port on slot 8, line 1 is configured with 128 kbps port speed and the 2 DS0s used are corresponding to TimeSlot 3 and 4, the svPortPhysicalPort is 3 (lowest available timeslot). Trap number: 20011	lastSequenceNumber svNodeGrpName trapSeverity trapReason svPortState trapCardType svPortSlot svPortLine svPortPort svPortPhysicalPort trapPortIdString
cardAlarm	This trap is generated whenever a card alarm status is received. Trap number: 20004	lastSequenceNumber svNodeGrpName trapSeverity trapReason trapCardStatus trapCardType trapCardSlotNumber
peripheralAlarm	This trap is generated whenever a peripheral alarm status is received. Peripheral alarms include the node level alarms listed below: •External Clock Source Failure •Too many invalid login attempts Trap number: 20005	lastSequenceNumber svNodeGrpName trapSeverity trapReason trapPeripheralStatus trapPeripheralType trapPeripheralUnitNumber
commBreakAlarm	This trap is generated whenever commbreak is reported. It is reported by all routing nodes in the network when one or more routing nodes become unreachable. trapCommBreakRptNode—Indicates the node which reported the commbreak. trapCommBreakNode—Indicates the node to which commbreak occurred. The trapReason codes for this trap are: comm-break-node-degraded (997) comm-break-alarm (999). When a trunk between two routing nodes fails and makes some nodes unreachable, each of the routing nodes in the network generate a commBreakAlarm trap, as explained in the following example: Example: consider a network of 4 routing nodes (A1, A2, B1 and B2) and one CWM station connected to node A1. CWM   |    |    A1 ----- A2 ---X --- B1 ---- B2 When the trunk between A2 and B1 goes into fail state, nodes will generate commBreakAlarm messages as below: (trapCommBreakRptNode) (trapCommBreakNode) Generating Node Reporting Node  commBreak Node A1 A1  B1 A1 A1  B2 A2 A2  B1 A2 A2  B2 B1 B1 A1 B1 B1 A2 B2 B2  A1 B2 B2  A2 Note Robust messages from nodes B1 and B2 may or may not reach CWM, depending on the IP routing path. After a node has entered the degraded mode, the node is unreachable from rest of the network. All other nodes are informed of the transition to the degraded mode. This trap is cleared by trap number 20017, commBreakClear. Trap number: 20016	lastSequenceNumber trapCommBreakRptNode trapCommBreakNode trapReason
commBreakClear	These nodes declare a communication break with the degraded node. If the communication break happens due to a node entering degraded mode, the reason code is 997. commBreakClear trap is issued after the degraded mode is cleared. This trap clears trap number 20016, cmmBreakAlarm. This trap is generated whenever commbreak, caused due to a node entering degraded mode or for some other reason, is cleared. It is generated by all routing nodes in the network when one or more routing nodes become reachable from a previous state of unreachable. trapCommBreakRptNode—Indicates the node which had reported the commbreak. trapCommBreakNode—Indicates the node to which commbreak is cleared. The trapReason code for this trap is: comm-break-clear (998). Trap number: 20017	lastSequenceNumber trapCommBreakRptNode trapCommBreakNode trapReason
feederAlarm	This trap is triggered by communication failure between a feeder and the routing node. feederAlarm trap is also triggered when status of feeder changes to Major or to Clear. When a communication failure occurs between the routing node and the feeder, the routing node generates feederAlarm with one of the following trapReason codes: ipx-fdr-communication-failure (5001)—for IPX feeder. axis-fdr-communication-failure (5002)—for MGX 8220 feeder igx-fdr-communication-failure (5016—for IGX 8400 feeder. When feeder status changes to Major, the routing node generates feederAlarm with one of the following trapReason codes: ipx-fdr-major-alarm (5009)—for IPX feeder. axis-fdr-major-alarm (5010)—for MGX 8220 feeder. igx-fdr-major-alarm (5018)—for IGX 8400 feeder. When communication between a routing node and feeder becomes normal or when feeder status changes to Clear, the routing node generates feederAlarm with one of the following trapReason codes: ipx-fdr-alarm-cleared (5005)—for IPX feeder. axis-fdr-alarm-cleared (5006)—for MGX 8220 feeder. igx-fdr-alarm-cleared (5017)—for IGX 8400 feeder. Note The feeder itself does not generate feederAlarm. Trap number: 20008	lastSequenceNumber svNodeGrpName trapSeverity trapReason trapFeederStatus svTrunkLocalSlot svTrunkLocalPort
physicalLineAlarm	This trap is generated whenever a physical line alarm status is received. Trap number: 20009	lastSequenceNumber svNodeGrpName trapSeverity trapReason lineStatus lineCardType lineInterface lineSlotNumber lineLineNumber linePortNumber trapLineIdString
imaTrunkAlarm	This trap is generated whenever IMA trunk alarm status is received. Trap number: 20010	lastSequenceNumber svNodeGrpName trapSeverity trapReason svTrunkStatus svTrunkCardType trapTrunkType svTrunkLocalSlot svTrunkLocalPort trapVirtualTrunkId trapTrunkIdString trapPhysicalLineIdString
imaVirtualTrunkAlarm	This trap is generated whenever IMA trunk alarm status is received. Trap number: 20012	lastSequenceNumber svNodeGrpName trapSeverity trapReason svTrunkStatus svTrunkCardType trapTrunkType svTrunkLocalSlot svTrunkLocalPort trapVirtualTrunkId trapTrunkIdString trapPhysicalLineIdString
cpuUtilizationAboveNormal	This trap is generated whenever an IPX, IGX 8400, BPX 8600 processor's CPU utilization is above the threshold. The alarm is reported from the node based on an existing interval statistic that is collected for profiling the performance of the node. Caution This trap affects service. This trap is cleared by trap number 20022, cpuUtilizationNormal. Trap number: 20021	lastSequenceNumber svNodeGrpName trapSeverity trapReason
cpuUtilizationNormal	This trap is generated whenever an IPX, IGX 8400, BPX 8600 processor's CPU utilization falls back below the threshold. The alarm is reported from the node based on an existing interval statistic that is collected for profiling the performance of the node. Caution This trap affects service. This trap clears trap number 20021, cpuUtilizationAboveNormal. Trap number: 20022	lastSequenceNumber svNodeGrpName trapSeverity trapReason
memoryUtilizationAbove Normal	This trap is generated whenever an IPX, IGX 8400, BPX 8600 processor's dynamic memory utilization exceeds a fixed threshold. The alarm is reported from the node based on existing statistics that are collected for profiling the performance of the node. Caution This trap affects service. This trap is cleared by trap number 20024, memoryUtilizationNormal. Trap number: 20023	lastSequenceNumber svNodeGrpName trapSeverity trapReason
memoryUtilizationNormal	This trap is generated whenever an IPX, IGX 8400, BPX 8600 processor's dynamic memory utilization falls below a lower threshold indicating the memory allocation has returned to a safe level. The alarm is reported from the node based on existing statistics that are collected for profiling the performance of the node. Caution This trap affects service. This trap clears trap number 20023, memoryUtilizationAboveNormal. Trap number: 20024	lastSequenceNumber svNodeGrpName trapSeverity trapReason
busFailure	This trap is generated whenever an IPX, IGX 8400, BPX 8600 bus fails. Caution This trap affects service. This trap is cleared by trap number 20026, busNormal. Trap number: 20025	lastSequenceNumber svNodeGrpName trapSeverity trapReason trapPeripheralUnitNumber
busNormal	This trap is generated whenever an IPX, IGX 8400, BPX 8600 bus failure is cleared. Caution This trap affects service. This trap clears trap number 20025, busFailure. Trap number: 20026	lastSequenceNumber svNodeGrpName trapSeverity trapReason
normalSwitchEvent	This event is originated by the switch in text format whenever something occurs on a node that would interest to someone responsible for node maintenance. This trap indicates that a normal event has occurred on the switch. Trap number: 1004	svNodeGrpNetName svNodeGrpName trapOccurTime trapMsgFormatTime trapTimeZone trapSeverityStr trapMsgStr
minorSwitchEvent	This event is originated by the switch in text format whenever something occurs on a node that would interest to someone responsible for node maintenance. This trap indicates that a minor event has occurred on the switch. Trap number: 1005	svNodeGrpNetName svNodeGrpName trapOccurTime trapMsgFormatTime trapTimeZone trapSeverityStr trapMsgStr
majorSwitchEvent	This event is originated by the switch in text format whenever something occurs on a node that would interest to someone responsible for node maintenance. This trap indicates that a major event has occurred on the switch. Trap number: 1006	svNodeGrpNetName svNodeGrpName trapOccurTime trapMsgFormatTime trapTimeZone trapSeverityStr trapMsgStr
criticalSwitchEvent	This event is originated by the switch in text format whenever something occurs on a node that would interest to someone responsible for node maintenance. This trap indicates that a critical event has occurred on the switch. Trap number: 1007	svNodeGrpNetName svNodeGrpName trapOccurTime trapMsgFormatTime trapTimeZone trapSeverityStr trapMsgStr
The following are traps for CWM Health Monitor.
svProcessRestarted	This trap is sent when a process within CWM, trapSvProcessName, is restarted. This trap clears trap number 28001, svProcessNotRestarted. Trap number: 28000	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity trapSvProcessName trapSvProcessId trapSvChildProcessNumber trapSvProcessRestartCount
svProcessNotRestarted	This trap is sent when a process within CWM. trapSvProcessName, is terminated. svNetworkName indicates the affected network by this event, if the terminated process is svmain. Otherwise, svNetworkName, is blank. This trap is cleared by trap number 28000, svProcessRestarted. Trap number: 28001	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity trapSvProcessName trapSvProcessId svNetworkName
svDatabaseFull	This trap is sent when CWM detects that the relational database is full. This trap is cleared by trap number 28003, svDatabaseNormal. Trap number: 28002	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity trapDbFullThreshold trapDbPercentFreeSpace
svDatabaseNormal	This trap is sent when CWM detects that the relational database is no longer full. This trap clears trap number 28002, svDatabaseFull. Trap number: 28003	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity trapDbFullThreshold trapDbPercentFreeSpace
svDiskSpaceLow	This trap is sent when CWM detects that the free disk space is running low. This trap is cleared by trap number 28005, svDiskSpaceNormal. Trap number: 28004	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity trapDiskSpaceLowThreshold trapAvailableMegaByte
svDiskSpaceNormal	This trap is sent when CWM detects that the free disk space is no longer low. This trap clears trap number 28004, svDiskSpaceLow. Trap number: 28005	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity trapDiskSpaceLowThreshold trapAvailableMegaByte
svTftpError	This trap is sent when a CWM process encounters a TFTP error received from a node. Trap number: 28006	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity trapTftpErrorType trapTftpErrorDetail, svNodeNetworkName svNodeGrpName
svRtmMaxMgrsRegistered	This trap is sent when the CWM RTM process cannot register with an agent (such as, an MGX 8220/VNS node) because the limit for maximum number of Managers to register is reached. The default limit is eight Managers. Trap number: 28007	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity svNodeIpAddress svNodeGrpPlatform svNodeNetworkName svNodeGrpName
svStatisticsParsingError	This trap is generated when the CWM statsparser process encounters an error when parsing a statistics file received from a node. Trap number: 28008	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity trapStatsFileName
svCWMNewRole	This trap is sent when the role of CWM is changed. trapSvStationRole indicates the new role of the local CWM. Trap number: 28009	lastSequenceNumber, trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity trapSvStationRole
svCWMNewPrimary	This trap is sent when the primary is changed. The trapSvPeerStationName indicates the CWM station name of the new primary. Trap number: 28010	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity trapSvPeerStationName
svCWMGatewayAdded	This trap is sent by all running/active CWMs when there is a CWM gateway process registered with the Primary CWM gateway. The trapSvPeerStationName indicates the CWM station name of the newly registered CWM gateway. Trap number: 28011	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity trapSvPeerStationName
svCWMGatewayRemoved	This trap is sent by all running/active CWMs when there is a CWM gateway process unregistered with the Primary CWM gateway. The trapSvPeerStationName indicates the CWM station name of the newly unregistered CWM gateway. Trap number: 28012	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity trapSvPeerStationName
svCWMGatewayDisconnectedWithPrimary	This trap is sent by a Secondary CWM when the CWM gateway process on the Secondary CWM station is disconnected with the CWM gateway process on the Primary. The reason caused the disconnection could be lost IP connectivity with the Primary CWM station or the abnormal exit of the Primary CWM gateway process. The trapSvPeerStationName indicates the disconnected Primary CWM station name. Trap number: 28013	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity trapSvPeerStationName
svCWMGatewayDisconnectedWithSecondary	This trap is sent by a Primary CWM when the CWM gateway process on the Primary CWM station is disconnected with the CWM gateway process on a Secondary. The reason caused the disconnection could be lost IP connectivity with the Secondary CWM station or the abnormal exit of the Secondary CWM gateway process. The trapSvPeerStationName indicates the disconnected Secondary CWM station name. Trap number: 28014	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity trapSvPeerStationName
svCWMGatewayReconnectedWithPrimary	This trap is sent by a Secondary CWM when the CWM gateway process on the Secondary CWM station is reconnected with the CWM gateway process on the Primary. The trapSvPeerStationName indicates the current connected Primary CWM station name. Trap number: 28015	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity trapSvPeerStationName
svCWMGatewayReconnectedWithSecondary	This trap is sent by a Primary CWM when the CWM Gateway process on the Primary CWM station is reconnected with the CWM Gateway process on a Secondary. The trapSvPeerStationName indicates the reconnected Secondary CWM station name. Trap number: 28016	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverity trapSvPeerStationName
svDatabaseInSync	This trap is sent when a process within CWM has completed synchronizing the database with the configuration in the network. CWM generates network configuration change traps to the external clients after this synchronization is complete. Trap number: 28075	lastSequenceNumber trapSvStationName trapSvStationIpAddress trapOccurTime trapTimeZone trapSeverityStr
The following are traps for node connectivity:
svNodeIpUnreachable	CWM finds a given node with the name svNodeGrpName to be IP unreachable. Note that a node is considered to be unreachable when CWM cannot send IP packets to that node, although the node may be able to communicate with other nodes in the network. This trap is cleared by trap number 25303, svNodeIpReachable. Trap number: 25302	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeGrpPlatform svNodeModel svNodeSubtype trapOccurTime trapTimeZone trapSeverity
svNodeIpReachable	CWM finds a given node with the name svNodeGrpName to be IP reachable. Note that a node is considered to be reachable when CWM can send IP packets to the node, although the node may be unable to communicate with other nodes in the network. This trap clears trap number 25302, svNodeIpUnreachable. Trap number: 25303	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeGrpPlatform svNodeModel svNodeSubtype trapOccurTime trapTimeZone trapSeverity
The following traps are for object status change
nodeAdded	This trap is generated whenever a node is added to the network. Trap number: 20050	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeId svNodeGrpPlatform svNodeModel svNodeSubtype svNodeGrpRelease
nodeDeleted	This trap is generated whenever a node is deleted from the network. Trap number: 20051	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeId svNodeGrpPlatform svNodeModel svNodeSubtype svNodeGrpRelease
nodeNameChange	This trap is generated whenever a node name is changed. Trap number: 20052	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeId svNodeGrpPlatform svNodeModel svNodeSubtype svNodeGrpRelease svNodeOldName
nodeIpAddressChange	This trap is generated whenever a node IP address is changed. Trap number: 20053	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeId svNodeGrpPlatform svNodeModel svNodeSubtype svNodeGrpRelease svNodeOldIpAddress
nodeStatusChange	This trap is generated whenever a node alarm status changes in the network. svNodeGrpAlarmState has the values clear (1), minor (2), major (3), and unreachable (4). svNodeGrpAlarmState is same as the node status shown in CWM topology display map. svNodeGrpFilteredAlarmState has the values notSupported(0), clear(1), minor(2), major(3), unreachable(4). svNodeGrpFiltered AlarmState is same as the node filtered status shown in CWM topology display map. This trap gives aggregate status of a node. Trap number: 20054	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeId svNodeGrpPlatform svNodeModel svNodeSubtype svNodeGrpRelease svNodeGrpAlarmState svNodeGrpFilteredAlarmState
cardAdded	This trap is generated whenever a card is added to IGX 8400 or BPX 8600 nodes. Trap number: 20055	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeGrpPlatform trapSeverity trapCardType trapCardSlotNumber, trapBackCardType
cardDeleted	This trap is generated whenever a card is deleted from IPX, IGX 8400, or BPX 8600 nodes. Trap number: 20056	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeGrpPlatform trapSeverity trapCardType trapCardSlotNumber trapBackCardType
peripheralAdded	This trap is generated whenever a peripheral is added to IPX, IGX 8400, or BPX 8600 nodes. Trap number: 20057	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeGrpPlatform trapSeverity trapPeripheralType trapPeripheralUnitNumber
peripheralDeleted	This trap is generated whenever a peripheral is deleted from IPX, IGX 8400, or BPX 8600 nodes. Trap number: 20058	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeGrpPlatform trapSeverity trapPeripheralType trapPeripheralUnitNumber
trunkAdded	This trap is generated whenever a trunk is added to IPX, IGX 8400, or BPX 8600 nodes. Trap number: 20059	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeGrpPlatform trapSeverity svTrunkCardType trapTrunkType svTrunkLocalSlot svTrunkLocalPort trapVirtualTrunkId trapTrunkIdString trapPhysicalLineIdString
trunkDeleted	This trap is generated whenever a trunk is deleted from IPX, IGX 8400, or BPX 8600 nodes. Trap number: 20060	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeGrpPlatform trapSeverity svTrunkCardType trapTrunkType svTrunkLocalSlot svTrunkLocalPort trapVirtualTrunkId trapTrunkIdString trapPhysicalLineIdString
lineAdded	This trap is generated whenever a line is added to IPX, IGX 8400, or BPX 8600 nodes. Trap number: 20061	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeGrpPlatform trapSeverity lineCardType trapCardSlotNumber lineInterface lineLineNumber linePortNumber trapLineIdString
lineDeleted	This trap is generated whenever a line is deleted from IPX, IGX 8400, or BPX 8600 nodes. Trap number: 20062	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeGrpPlatform trapSeverity lineCardType trapCardSlotNumber lineInterface lineLineNumber linePortNumber trapLineIdString
portAdded	This trap is generated whenever a port is added to IPX, IGX 8400, or BPX 8600 nodes. Trap number: 20063	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeGrpPlatform trapSeverity svPortAlarmPortType svPortSlot svPortLine svPortPort trapPortIdString
portDeleted	This trap is generated whenever a port is deleted from IPX, IGX 8400, or BPX 8600 nodes. Trap number: 20064	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeGrpPlatform trapSeverity svPortAlarmPortType svPortSlot svPortLine svPortPort trapPortIdString
cardModified	This trap is generated when a card is modified on an IPX, IGX 8400, or BPX 8600 node. When the back card (bc_type field in the CWM Card database table) is changed, this trap is generated. Trap number: 20065	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeGrpPlatform trapSeverity trapCardType trapCardSlotNumber trapBackCardType trapCardStatus
trunkModified	This trap is generated when a trunk is modified on an IPX, IGX 8400, and BPX 8600 node. The trunk parameters in the CWM database packet_line table which trigger the trunkModified trap are listed below: Database Column Description b_bq_depth               Bursty Data B Queue Depth b_bq_efcn                 Bursty Data B EFCN/ENCI Threshold clp_h_thresh             CLP High Dropping Threshold clp_l_thresh              CLP Low Dropping Threshold time_load                  Time stamped load units non_time                   Non-time stamped load units v_load                       Voice load units bursty_a_load            Bursty Data A load units bursty_b_load            Bursty Data B load units bursty_a_cmax          Bursty Data A Credit Max bursty_b_cmax           Bursty Data B Credit Max Trap number: 20066	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeGrpPlatform trapSeverity svTrunkCardType trapTrunkType svTrunkLocalSlot svTrunkLocalPort trapVirtualTrunkId trapTrunkIdString trapPhysicalLineIdString svTrunkStatus
portModified	This trap is generated whenever a port is modified on an IPX, IGX 8400, and BPX 8600 node: Database Column Description port_speed                    Port Speed in hundreds of bits per second protocol_type               Signalling Protocol type queue_depth                 Port Queue Depth ecn_thresh                    ECN Threshold de_thresh                      Discard Eligible Threshold elmi                                Enhanced LMI enabled/disabled For ATM ports, modifying following fields in the asi_port table trigger portModified trap: Database Column Description port_speed                    Port Speed in hundreds of bits per second prot_type                      Signalling Protocol type svc_in_use                     Switched Virtual Circuits in use. There are no ports associated with voice connections. Trap number: 20067	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeGrpPlatform trapSeverity svPortAlarmPortType svPortSlot svPortLine svPortPort trapPortIdString svPortState
lineModified	This trap is generated whenever a port is modified on an IPX, IGX 8400, and BPX 8600 node. Trap number: 20068	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeIpAddress svNodeGrpPlatform trapSeverity lineCardType trapCardSlotNumber lineLineNumber linePortNumber trapLineIdString
apsClearAlarm	This trap is generated whenever the APS alarm is cleared. Trap number: 20100	lastSequenceNumber svNodeGrpName trapSeverity trapReason apsLineIdString apsWorkSlot apsWorkLine apsProtectSlot apsProtectLine apsInterface apsActiveLine
apsActivatedAlarm	This trap is generated whenever the APS is enabled on the line. Trap number: 20101	lastSequenceNumber svNodeGrpName trapSeverity trapReason apsLineIdString apsWorkSlot apsWorkLine apsProtectSlot apsProtectLine apsInterface apsActiveLine
apsDeactivatedAlarm	This trap is generated whenever the APS is disabled on the line. VarbindapsProtectSlot and apsProtextLine always have value 255 to indicate no protection line. Trap number: 20102	lastSequenceNumber svNodeGrpName trapSeverity trapReason apsLineIdString apsWorkSlot apsWorkLine apsProtectSlot apsProtectLine
apsCardFailedAlarm	This trap is generated whenever the APS card is in alarm state. That includes missing cards (protection, working, front, back) and card mismatch. This trap is cleared by trap number 20108, apsClearTrap. Trap number: 20103	lastSequenceNumber svNodeGrpName trapSeverity trapReason apsLineIdString apsWorkSlot apsWorkLine apsProtectSlot apsProtectLine apsInterface apsActiveLine
apsLineFailedAlarm	This trap is generated whenever the APS configured line is in alarm state including: •line loop •channel mismatch •protection switch byte failure. This trap is cleared by trap number 20108, apsClearTrap. Trap number: 20104	lastSequenceNumber svNodeGrpName trapSeverity trapReason apsLineIdString apsWorkSlot apsWorkLine apsProtectSlot apsProtectLine apsInterface apsActiveLine
apsLineSwitchedAlarm	This trap is generated whenever the APS lines are switched. Types of switching supported: •Manual •Signal degrade hi/low prior switch •Forced signal •Switch due to protection lockout on other end •Wait-to-restore switch •Exercise switch •Reverse request switch •Non-Revert switch This trap is cleared by trap number 20108, apsClearTrap. Trap number: 20105	lastSequenceNumber svNodeGrpName trapSeverity trapReason apsLineIdString apsWorkSlot apsWorkLine apsProtectSlot apsProtectLine apsInterface apsActiveLine
apsLineSwitchFailedAlarm	This trap is generated whenever the APS line switch fails. This trap is cleared by trap number 20108, apsClearTrap. Trap number: 20106	lastSequenceNumber svNodeGrpName trapSeverity trapReason apsLineIdString apsWorkSlot apsWorkLine apsProtectSlot apsProtectLine apsInterface apsActiveLine
apsStbyLineFailedAlarm	This trap is generated whenever the APS standby line switch is in alarm. User can perform maintenance on standby line before line switching occurs. This trap is cleared by trap number 20108, apsClearTrap. Trap number: 20107	lastSequenceNumber svNodeGrpNetName svNodeGrpName svNodeGrpIPAddress svNodeGrpPlatform trapSeverity trapReason apsLineIdString apsWorkSlot apsWorkLine apsProtectSlot apsProtectLine apsInterface apsActiveLine
apsClearTrap	This trap is generated whenever the APS alarm is cleared. This trap contains extra varbind to indicate previous fails. This trap clears the following traps numbers: •20103 = apsCardFailedAlarm •20104 = apsLineFailedAlarm •20105 = apsLineSwitchedAlarm •20106 = apsLineSwitchFailedAlarm •20107 = apsStbyLineFailAlarm Trap number: 20108	lastSequenceNumber svNodeGrpName trapSeverity trapReason apsLineIdString apsWorkSlot apsWorkLine apsProtectSlot apsProtectLine apsInterface apsActiveLine
svUserConnComplete	This trap is obsoleted by trap number 25113, cwmUserConnComplete. Trap number: 25013	—
svUserConnIncomplete	This trap is obsoleted by trap number 25114, cwmUserConnIncomplete. Trap number: 25014	—
svUserConnModified	This trap is obsoleted by trap number 25115, cwmUserConnModified. Trap number: 25015	—
svUserConnectionCleared	This trap is obsoleted by trap number 25116, cwmUserConnectionCleared. Trap number: 25016	—
svUserConnectionFailed	This trap is obsoleted by trap number 25117, cwmUserConnectionFailed. Trap number: 25017	—
svUserConnectionDown	This trap is obsoleted by trap number 25118, cwmUserConnectionDown. Trap number: 25018	—
svUserConnCurrRoute	The current route has been modified. Trap number: 25019	lastSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnRemoteEndPt svConnRemoteStr svConnAlarmRemoteEndNNI svCCurrRouteDesc svConnType
Note Traps 25113 through 25118 obsolete Traps 25013 through 25018 cwmUserConnComplete	This trap is generated under the following conditions after the CWM database is in sync with the network: 1. A new user connection is added from any Connection Manager interface. 2. A 2-segment or 3-segment incomplete user connection becomes complete when the missing segment is added. Examples: (when there is no shelf, a null string {..} is used.) The following is a 1-segment UserConnection with the segments listed below: bpx1..10.1.6.16 - bpx2..10.1.6.22 The following is a 2-segment UserConnection with the segments listed below: bpx1.axis1.6.1.100.100 - bpx1.axis1.1.2.6.16 bpx1..10.1.6.16 - bpx2..10.1.6.22 If one of the above 2 segments was initially missing and is added to form a complete user connection, this trap is generated. The following is a 3-segment UserConnection with the segments listed below: bpx1.axis1.6.1.100.100 - bpx1.axis1.1.2.6.16 bpx1..10.1.6.16 - bpx2..10.1.6.22 bpx2.axis2.1.2.6.22 - bpx2.axis1.6.3.100.101 If one of the above 3 segments was initially missing and is added to form a complete UserConnection, this trap is generated. A user connection alarm status trap is also generated upon user connection completion. Note This trap is generated for PVC, SPVC, HybridVC, and XPVC connections. This trap obsoletes trap number 25013, cwmUserConnComplete. This trap clears trap number 25114, cwmUserConnIncomplete. Trap number: 25113	lastSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnRemoteEndPt svConnRemoteStr svConnAlarmRemoteEndNNI svConnType svConnDescriptor
cwmUserConnIncomplete	This trap is generated under the following conditions after the CWM database is in sync with the network: 1. A 1-segment user connection is deleted. 2. A 2-segment or 3-segment complete user connection becomes incomplete when a segment is deleted. Examples: (when there is no shelf, a null string {..} is used.) The following is a 1-segment user connection with the segments listed below: bpx1..10.1.6.16 - bpx2..10.1.6.22 This trap is generated when the above segment is deleted. The following is a 2-segment user connection with the segments listed below: bpx1.axis1.6.1.100.100 - bpx1.axis1.1.2.6.16 bpx1..10.1.6.16 - bpx2..10.1.6.22 If one of the above 2 segments is deleted to change a complete into an incomplete user connection, this trap is generated. Note, no other user connection traps are generated when the remaining segment is deleted. The following is a 3-segment user connection with the segments listed below: bpx1.axis1.6.1.100.100 - bpx1.axis1.1.2.6.16 bpx1..10.1.6.16 - bpx2..10.1.6.22 bpx2.axis2.1.2.6.22 - bpx2.axis1.6.3.100.101 If one of the above 3 segments is deleted to change a complete into an incomplete user connection, this trap is generated. Note, no other user connection traps are generated when the remaining segments are deleted. Note This trap is generated for PVC, SPVC, HybridVC, and XPVC connections. This trap obsoletes trap number 25014, svUserConnIncomplete. This trap is cleared by trap number 25113, cwmUserConnComplete. Trap number: 25114	lastSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnRemoteEndPt svConnRemoteStr svConnAlarmRemoteEndNNI svConnType svConnDescriptor
cwmUserConnModified	This trap is generated when a UserConnection table parameter is modified after the CWM database is in sync with the network. In a 3-segment User Connection, a change to the bandwidth parameter can be reported by a routing node, as well as feeder nodes. These notifications are received asynchronously by CWM and are updated accordingly. If each of these notifications were to trigger a cwmUserConnModified trap, more than one trap would be generated. Therefore, to avoid generating multiple traps for a single modification, cwmUserConnModified is delayed for a configurable time out period. Within this timeout period, all segments of the UserConnection are updated, as reported by different nodes, and a single cwmUserConnModified trap is generated. The default value of time to delay this trap generation is 2 minutes. The parameters which cause the cwmUserConnModified trap to be generated are as follows: User Connection Table: Database Column Description l_per_util—Local end percent utilization r_per_util—Remote end percent utilization l_mc_type—Local multicast type flag (for multicast connections) r_mc_type—Remote multicast type flag (for multicast connections) l_end_nni -1: unknown port type 1: nni port type 0: non nni port type r_end_nni -1: unknown port type or incomplete PVC 1: nni port type 0: non nni port type Logical Connection Table: Database Column Description cos—Class of Service 0 = False 1 = True	lastSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnRemoteEndPt svConnRemoteStr svConnAlarmRemoteEndNNI svConnOpStatus svConnLocAbitStatus svConnLocAISStatus svConnLocOAMLoopbackStatus svConnLocConditionedStatus svConnRemAbitStatus svConnRemAISStatus svConnRemOAMLoopbackStatus svConnRemConditionedStatus svConnType svConnDescriptor
cwmUserConnModified (continued)	avoid_trk_type—Trunk types to avoid: 1 = None 2 = Satellite 3 = Terrestrial avoid_zcs—Avoid ZCS trunks 0 = False 1 = True Connection Table: Database Column Description bit(7) Fast EIA Enabled(1)/Dis rate_info coabled(0)n field of rate info: bit(6) DFM Enabled(1)/Disabled(0) bits(5-3) Encoding: undefined(0) 7/8(1) 8/8(2) 8/8l(3) 7/8E(4) bit(2-0) Load Type: undefined(0) voice(1) non-TS(2) TS(3) Bursty Data A(4) Bursty Data B(5) min_bw—minimum guaranteed bandwidth in hundreds of bits per second. qir—quiescent information rate in hundreds of bits per second. pir—peak information rate in hundreds of bits per second vc_q_depth—vc queue depth in bytes vc_q_thresh—vc queue threshold in bytes (Ingress queue ECN threshold) vc_de_thresh—Ingress queue DE threshold eg_q_depth—Egress queue depth eg_q_de_thresh—Egress queue DE threshold eg_q_ecn_thresh—Egress queue ECN threshold de_tag_ena—DE tagging enable/disable cmax—credit max for a connection in packets	—
cwmUserConnModified (continued)	conn_info_flag —connection information flag bit(7) ForeSight Enabled (1) Disabled (0) bit(6) SNA priority High (1) Low (0) bit(5-0) unused cir—committed information rate in hundreds of bits per second ibs—initial burst size bc—burst-committed in bytes be—burst-excess in bytes eg_q_select—Egress queue selection Database Column Description channel_type—Channel type (currently used by connections terminating on FRSM) 1 = FR-NetworkInterWorking 2 = FR-ServiceInterWorking-Trans parent. 3 = FR-ServiceInterWorking-Trans late 4 = FR-FUNI 5 = Frame-Forwarding fecn—Forward explicit congestion notification. de_to_clp_map—DE to CLP map 2 = SET DE 0 and SET CLP 0 3 = SET DE 1 and SET CLP 1 clp_to_de_map—CLP to DE map 2 = SET DE 0 and SET CLP 0 3 = SET DE 1 and SET CLP 1 rate_type—For voice/data connections only rate type: 0-13 SET to -1 for other connection types. rate_fctr—For data connections only: rate factor: (1-8) SET to -1 for other connection types	—
cwmUserConnModified (continued)	Connection Table (continued): mfs—MFS ccdv—CCDV clp_hi—CLP High threshold smpl_per_pckt—For data connections only: sample per packet: (1, 2, 4, 5, 10). SET to -1 for other connection types. ATM Connection Table Database Column Description mir—minimum information rate in 100bps qir—quiescent information rate in 100bps pir—peak information rate in 100bps cir—committed information rate in 100bps con_info_flag—connection information flag: bit(7) ForeSight Enabled (1) Disabled (0) bit(6) SNA priority High (1) Low (0) bit (5-0) are unused ibs—Initial burst size vc_q_depth—VC queue depth in bytes efci_q_thresh—EFCI Queue thresh cbs—CBS Database Column Description clp_loCLP Low threshold fst_rate_up—ForeSight Rate Up fst_rate_dn—ForeSight Rate Down fst_fast_dn—ForeSight Fast Down fst_qir_to—ForeSight QIR timeout fst_max_adj—ForeSight Maximum Adjustment	—
cwmUserConnModified (continued)	ATM Connection Table (continued): mc_type—Multicast type: normal (0) root (1) eaf (2) clp_tagging—CLP Tagging (enable = 2, disable = 1) upc_enable—UPC Enable (enable = 2, disable = 1) rm_enable—RM Enable (enable = 2, disable = 1) u_fgcra—FGCRA (enable = 2, disable = 1) u_scr_policing—SCR Policing (CLP0 = 1, CLP0 and CLP1 = 2, off = 3) u_pcr01—PCR0+1 u_ccdv01—CCDV0+1 u_ccdv0—CCDV0 nrm—NRM tbe—TBE frtt—FRTT vsvd—VSVD Logical Connection Table: Database Column Description cos—Class of Service (0 =False 1, + True) cell_loss_period—cell loss integration period (milliseconds) cdv_rx_t—maximum cell arrival jitter tolerated by the reassembly process (in 10 microsecond increments). cbr_clock_mode—clocking mode of the CBR serviceValues: synchronous (1) srts (2) adaptive (3)	—
cwmUserConnModified (continued)	CESM Connection Table: Database Column Description cas specifies if CAS bits are carried by the service. Values: basic (1) e1Cas (2) ds1SfCas (3) ds1EsfCas (4) ccs (5) partial_fillnumber of user octets per cell, if partial cell fill is used Value range: 0-47 idle_detection dle Detection (CESM-8) Values: disable (1) and onhook (2) onhook_code—Onhook Code (CESM-8) Value range: 0-15 idle_suppression—Idle Suppression (CESM-8) Values: disable (1) and enable (2) Trap number: 25015 Database Column Description cas verifies if CAS bits are carried by the service. Values: basic (1) e1Cas (2) ds1SfCas (3) ds1EsfCas (4) ccs (5) partial_fill number of user octets per cell, if partial cell fill is used Value range: 0-47 idle_detection—Idle Detection (CESM-8) Values: disable (1) and onhook (2) onhook_code—Onhook Code (CESM-8) Value range: 0-15 idle_suppression—Idle Suppression (CESM-8) Values: disable (1) and enable (2) Note This trap is generated for PVC, SPVC, and HybridVC connections. This trap obsoletes trap number 25015, svUserConnModified. Trap number: 25115	—
cwmUserConnectionCleared	The User Connection has recovered from failed/downed state after the CWM database is in sync with the network. Note This trap is generated for PVC, SPVC, HybridVC, and XPVC connections. This trap obsoletes trap number 25016, svUserConnectionCleared. This trap clears the following trap numbers: •25117 = cwmUserConnectionFailed •25118 = cwmUserConnectionDown Trap number: 25116	astSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnRemoteEndPt svConnRemoteStr svConnAlarmRemoteEndNNI svConnOpStatus svConnLocAbitStatus svConnLocAISStatus svConnLocOAMLoopbackStatus svConnLocConditionedStatus svConnRemAbitStatus svConnRemAISStatus svConnRemOAMLoopbackStatus svConnRemConditionedStatus svConnType svConnDescriptor
cwmUserConnectionFailed	The User Connection has failed after the CWM database is in sync with the network. Note This trap is generated for PVC, SPVC, HybridVC, and XPVC connections. This trap obsoletes trap number 25017, svUserConnectionFailed. This trap is cleared by trap number 25116, cwmUserConnectionCleared. Trap number: 25117	astSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnRemoteEndPt svConnRemoteStr svConnAlarmRemoteEndNNI svConnOpStatus svConnLocAbitStatus svConnLocAISStatus svConnLocOAMLoopbackStatus svConnLocConditionedStatus svConnRemAbitStatus svConnRemAISStatus svConnRemOAMLoopbackStatus svConnRemConditionedStatus svConnType svConnDescriptor
cwmUserConnectionDown	The User Connection has been downed after the CWM database is in sync with the network. Note This trap is generated for PVC, SPVC, HybridVC, and XPVC connections. This trap obsoletes trap number 25018, svUserConnectionDown. This trap is cleared by trap number 25116, cwmUserConnectionCleared. Trap number: 25118	astSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnRemoteEndPt svConnRemoteStr svConnAlarmRemoteEndNNI svConnOpStatus svConnLocAbitStatus svConnLocAISStatus svConnLocOAMLoopbackStatus svConnLocConditionedStatus svConnRemAbitStatus svConnRemAISStatus svConnRemOAMLoopbackStatus svConnRemConditionedStatus svConnType svConnDescriptor
cwmTrapConnAdded	A new end-to-end connection is added from any Connection Manager interface (GUI or Service Agent). A connection alarm status trap is also generated. Note This trap is only generated for XPVC connections. Trap number: 25210	lastSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnRemoteEndPt svConnRemoteStr svConnAlarmRemoteEndNNI svConnType svConnDescriptor svConnProtocolType
cwmTrapConnDeleted	A connection is deleted from any Connection Manager interface (GUI or Service Agent). Note This trap is only generated for XPVC connections. Trap number: 25211	lastSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnRemoteEndPt svConnRemoteStr svConnAlarmRemoteEndNNI svConnType svConnDescriptor svConnProtocolType
cwmTrapConnDescModified	The Connection Descriptor for the end-to-end connection is modified. Note This trap is only generated for XPVC connections. Trap number: 25212	lastSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnRemoteEndPt svConnRemoteStr svConnAlarmRemoteEndNNI svConnType svConnDescriptor svConnProtocolType
cwmUser1EndConnComplete	User connection described by the above endpoints becomes complete. This trap is generated after the CWM database is in sync with the network. Note This trap is only for single-ended SPVCs. Trap number: 25123	lastSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnType svConnDescriptor
cwmUser1EndConn Incomplete	User connection described by the above endpoints changes from being complete to incomplete. This trap is generated after CWM database is in sync with the network. Note This trap is only for single-ended SPVCs. Trap number: 25124	lastSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnType svConnDescriptor
cwmUser1EndConnModified	This trap is generated when a user connection parameter is modified after the CWM database is in sync with the network. Note This trap is only for single-ended SPVCs. Trap number: 25125	lastSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnOpStatus svConnLocAbitStatus svConnLocAISStatus svConnLocOAMLoopbackStatus svConnLocConditionedStatus svConnType svConnDescriptor
cwmUser1EndConnection Cleared	The User Connection has recovered from failed/downed state after the CWM database is in sync with the network. Note This trap is only for single-ended SPVCs. Trap number: 25126	lastSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnOpStatus svConnLocAbitStatus svConnLocAISStatus svConnLocOAMLoopbackStatus svConnLocConditionedStatus svConnType svConnDescriptor
cwmUser1EndConnection Failed	The User Connection has failed after the CWM database is in sync with the network. Note This trap is only for single-ended SPVCs. Trap number: 25127	lastSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnOpStatus svConnLocAbitStatus svConnLocAISStatus svConnLocOAMLoopbackStatus svConnLocConditionedStatus svConnType svConnDescriptor
cwmUser1EndConnection Down	The User Connection has been downed after the CWM database is in sync with the network. Note This trap is only for single-ended SPVCs. Trap number: 25128	lastSequenceNumber svConnLocalEndPt svConnLocalStr svConnAlarmLocalEndNNI svConnOpStatus svConnLocAbitStatus svConnLocAISStatus svConnLocOAMLoopbackStatus svConnLocConditionedStatus svConnType svConnDescriptor
The following traps are for virtual switches.
controllerAdded	This trap is generated whenever a virtual switch (VSI controller) is added to the network. Trap number: 30000	lastSequenceNumber svNodeGrpNetName svNodeGrpName vsiCtrlrName vsiCtrlrType vsiCtrlrIpAddress vsiRscPartId
controllerDeleted	This trap is generated whenever a virtual switch (VSI controller) is deleted from the network. Trap number: 30001	lastSequenceNumber svNodeGrpNetName svNodeGrpName vsiCtrlrName vsiCtrlrType vsiCtrlrIpAddress vsiRscPartId
controllerModified	This trap is generated whenever a VSI controller is modified in the network. Trap number: 30002	lastSequenceNumber svNodeGrpNetName svNodeGrpName vsiCtrlrName vsiCtrlrType vsiCtrlrIpAddress vsiRscPartId
vsiInterfaceAdd	This trap is generated whenever a VSI logical interface is added. Trap number: 30100	lastSequenceNumber vsiRscPartId svNodeGrpNetName svNodeGrpName svPortSlot svPortLine svPortPort trapVirtualTrunkId
vsiInterfaceDeleted	This trap is generated whenever a VSI logical interface is deleted. Trap number: 30101	lastSequenceNumber vsiRscPartId svNodeGrpNetName svNodeGrpName svPortSlot svPortLine svPortPort trapVirtualTrunkId
vsiInterfaceModified	This trap is generated whenever a VSI logical interface is modified. Trap number: 30102	lastSequenceNumber vsiRscPartId svNodeGrpNetName svNodeGrpName svPortSlot svPortLine svPortPort trapVirtualTrunkId
cwmfrNetworkCommFailure	This trap is generated internally by CWM subsystems when the subsystem detects a problem while communicating with the network. The cwmfrNetworkCommFailureCode object provides the following reason codes for network communication failure traps. •ftp-session-fail(1) •ftp-transfer-fail(2) •net-link0-down(3) •net-link1-down(4) •ntsmgr-net-fail(5) •nts-trap-loss(6) Trap number: 28101	lastSequenceNumber trapSeverity cwmfrNetworkCommFailure Code svNodeId svNodeIpAddress trapSvProcessName cwmfrSearchableTrap Description cwmfrTrapDescription
cwmfrNetworkProcessing Error	This trap is generated internally by CWM subsystems when the subsystem detects a problem while failing to process network events. The cwmfrNetworkProcessingErrorCode object provides the following reason codes for network processing failure traps. •no-nw-partition(1) •no-node-revision(2) •no-node-subscription(3) •incorrect-msg(4) •ftp-file-size-mismatch(5) •tftp-transfer-fail(6) •upload-file-error(7) •minus2-trap(8) •card-lost-trap(9) •snmp-retry-exceeded(10) •ftp-retry-exceeded(11) •syncup-failed(12) •stats-file-error(13) •stats-file-transfer-error(14) •snmp-throttle-error(15) •backoff-failed(16) Trap number: 28102	lastSequenceNumber trapSeverity cwmfrNetworkProcessingError Code svNodeId svNodeIpAddress trapSvProcessName cwmfrSearchableTrap Description cwmfrTrapDescription
cwmfrNetworkCommTimeout	This trap is generated internally by CWM subsystems when the subsystem detects a timeout while communicating with the network. The cwmfrNetworkCommTimeoutCode object provides the following reason codes for network timeout failure traps. •snmp-timeout(1) •ftp-session-timeout(2) •ftp-transfer-timeout(3) •tftp-transfer-timeout(4) Trap number: 28103	lastSequenceNumber trapSeverity cwmfrNetworkCommTimeout Code svNodeId svNodeIpAddress trapSvProcessName cwmfrSearchableTrap Description cwmfrTrapDescription
cwmfrNetworkConfigurationError	This trap is generated when CWM detects invalid network configuration which could result in inconsistent topology or failed syncup. The cwmfrNetworkConfigurationErrorCode object provides the following reason codes for network configuration error traps. •invalid-network-conf(1) •duplicate-node-name(2) •duplicate-ip-addr(3) •duplicate-trunks(4) •invalid(5) •duplicate-node(6) Trap number: 28104	lastSequenceNumber trapSeverity cwmfrNetworkConfigurationErrorCode svNodeId svNodeIpAddress cwmfrSearchableTrap Description cwmfrTrapDescription
cwmfrCwmWatchdogError	This trap is generated internally by CWM watchdog process when it detects any process start failures. The cwmfrCwmWatchdogErrorCode object provides the following reason codes for CWM watchdog error traps. •process-restarting(1) •giveup-process-restart(2) Trap number: 28201	lastSequenceNumber trapSeverity cwmfrCwmWatchdogErrorCode trapSvProcessName cwmfrTrapDescription
cwmfrCwmGatewayStatus	This trap is generated when CWM gateway process connects or disconnects with its peers. The cwmfrCwmGatewayStatusCode object provides the following reason codes for CWM gateway status traps. •primary-disconnected(1) •secondary-disconnected(2) •primary-reconnected(3) •secondary-reconnected(4) Trap number: 28202	lastSequenceNumber trapSeverity cwmfrCwmGatewayStatusCode trapSvStationName cwmfrTrapDescription
cwmfrCwmInternalError	This trap is generated internally by CWM subsystems when the subsystem detects internal failures. The cwmfrCwmInternalErrorCode object provides the following reason codes for CWM internal error traps. •unknown-error(1) •initialization-error(2) •spawn-child-error(3) •configuration-error(4) •communication-error-ilog(5) •communication-error-shared-mem(6) •communication-error-corba(7) •tftpmgr-queue-full(8) Trap number: 28203	lastSequenceNumber trapSeverity cwmfrCwmInternalErrorCode trapSvProcessName cwmfrSearchableTrap Description cwmfrTrapDescription
cwmfrCwmDatabaseError	This trap is generated internally by CWM subsystems when the subsystem detects a database error. The cwmfrCwmDatabaseErrorOpCode object provides the following reason codes for CWM database error traps. •unknown(1) •initialization-error(2) •insert(3) •update(4) •delete(5) •select(6) Trap number: 28204	lastSequenceNumber trapSeverity cwmfrCwmDatabaseError OpCode trapSvProcessName cwmfrSearchableTrap Description cwmfrTrapDescription
cwmfrCwmSystemError	This trap is generated internally by CWM subsystems when the subsystem detects system failures. The cwmfrCwmSystemErrorCode object provides the following reason codes for CWM system error traps. •disk-space-low(1) •disk-space-normal(2) •db-space-low(3) •db-space-normal(4) •swap-space-low(5) •swap-space-normal(6) Trap number: 28301	lastSequenceNumber trapSeverity cwmfrCwmSystemErrorCode cwmfrTrapDescription

Virtual Switch Table

The vsiSwitchGrpTable is used to configure a virtual switch.

Table B-11 Virtual Switch Table 

Trap Name	Description	Variables
vsiSwitchNum	This is the virtual switch number. Access: Read Only.	—
vsiCtrlrName	Name assigned to the VSI Controller. Access: read only.	Display string: 0-32 characters.
vsiCtrlrType	This is the controller type Access: read only.	par (1) pnni (2) tag (3)
vsiCtrlrIpAddress	IP address assigned to the VSI Controller. Access: read only.	—
vsiCtrlrId	This is the VSI Controller ID. Access: read only.	—
vsiCtrlrRscPartId	VSI resource partition ID. Access: read only.	—

VSI Resource Partition Table

The vsiRscPartTable contains objects for configuring virtual switch interface (VSI) resource partitions.

Table B-12 VSI Interface Resource Partition Table 

Trap Name	Description	Variables
vsiRscPartIfNum	This is the VSI logic interface number. Access; Read Only.	—
vsiRscPartID	This is the VSI resource partition ID. Access: Read only.	—
vsiIfRscPretMaxbandwidth	The max bandwidth allocated to this logical interface. Access: Read-write.	0-1412830
vsiIfRscPrtVpiLow	The beginning of the VPI range reserved for this partition. Read-Write.	0-4095
vsiIfRscPrtVpiHigh	The end of the VCI range reserved for this partition. Read-Write	0-4095
vsiIfRscPrtVciLow	The beginning of the VCI range reserved for this partition.	—
vsiIfRscPrtVciHigh	The end of the range reserved for the this partition. This field is only valid for logical interfaces configured with a single VPI.	0-'ffff'h
vsiIfRscPrtMinChans	This represents min. no. of channels that are available to the controller.	0-32767
vsiIfRscPrtMaxChans	This represents max. no. of channels that are available to the controller.	0-32767