Telnet Messages

Table Of Contents

Telnet Messages

Server Telnet Messages

Command Not Supported

Enter Command or HELP

Operator Forced Logout

Password Not Authorized

Requested Command Cannot Be Serviced

Requested Service Restricted

prodid Server Telnet (hostid) timestamp

Server Telnet User uid Logged Out

Service Completed Abnormally

Translate Table Cannot Be Loaded

Userid is Not Defined To the Security System

Telnet Messages

---

This chapter describes unnumbered messages issued to the client by Server Telnet.

Server Telnet Messages

This section includes the messages that are issued by Server Telnet.

Command Not Supported

Explanation    There is no support for the command name entered, or the support is not properly defined in the Cisco IOS for S/390 configuration.

Recommended Action    Enter the proper command name, or consult with your System Administrator to resolve the issue.

Enter Command or HELP

Explanation    This is the main user prompt issued by Server Telnet.

Recommended Action    In response, enter the name for a command, service, or VTAM application supported by the Server Telnet component of Cisco IOS for S/390. Alternatively, enter HELP, for guidance.

Operator Forced Logout

Explanation    Cisco IOS for S/390 has terminated, either abnormally or normally, in response to an MVS operator STOP command.

Recommended Action    Await restart of Cisco IOS for S/390, and then resume working.

Password Not Authorized

Explanation    The password entered does not match the user ID entered.

Recommended Action    Use a proper combination of user ID and password.

Requested Command Cannot Be Serviced

Explanation    The requested service could not be executed because its supporting module could not be found or loaded correctly.

Recommended Action    Report the matter to your System Administrator for resolution.

Requested Service Restricted

Explanation    This message reports that the requested service is restricted and access will depend on your user ID and password.

Recommended Action    In response to subsequent prompts, enter your user ID and password.

prodid Server Telnet (hostid) timestamp

Explanation    This is the sign on banner for the Server Telnet component of Cisco IOS for S/390. prodid identifies the version of Cisco IOS for S/390 to which you have connected. hostid is the domain name (host name on the TCP/IP network) for this instance of Cisco IOS for S/390. timestamp reports the date and time the connection was established.

Server Telnet User uid Logged Out

Explanation    This message reports that the user ID uid has been logged out. This message appears after a service has been executed or a change of user ID is changing.

Service Completed Abnormally

Explanation    The module providing the service terminated abnormally.

Recommended Action    Report the failure to your System Administrator for resolution.

Translate Table Cannot Be Loaded

Explanation    The translate table specified by the TRANTBL parameter on the TELNET or APPL statement cannot be found or cannot be loaded properly. Consequently the service requested could not be executed.

Recommended Action    Have your System Administrator correct the Cisco IOS for S/390 configuration or make available the proper translate table load module.

Userid is Not Defined To the Security System

Explanation    An unknown user ID has been entered for access to a restricted service.

Recommended Action    Enter a user ID and password that is authorized for the service.