- Configuring Asynchronous Serial Traffic Over UDP
- Modem Signal and Line States
- Configuring X.25 on ISDN Using AO/DI
- Configuring ISDN BRI
- Leased and Switched BRI Interface for ETSI NET3
- ISDN BCAC and Round-Robin Channel Selection Enhancements
- Configuring ISDN Special Signaling
- Configuring Snapshot Routing
- Reliable Static Routing Backup Using Object Tracking
- Configuring Dial Backup for Serial Lines
- Configuring Dial Backup with Dialer Profiles
- Dialer Watch Connect Delay
- Configuring Cisco Easy IP ..
- Configuring Virtual Profiles
- Configuring Virtual Template Interfaces
- Configuring Media-Independent PPP and Multilink PPP
- Customer Profile Idle Timer Enhancements for Interesting Traffic
- Troubleshooting Enhancements for Multilink PPP over ATM Link Fragmentation and Interleaving
- Configuring PPP Callback
- Configuring ISDN Caller ID Callback
- Configuring BACP
- Large-Scale Dial-Out (LSDO) VRF Aware
Notes
This configuration guide contains Cisco IOS features that are supported in many different software release trains and on many different platforms. Some of the features that are included in this configuration guide may not be supported in your Cisco IOS software release train. This configuration guide may contain information that is not specific to a particular platform or release; however, platform differences and feature release information are included in this guide.
Some configuration guides contain content that may be superseded by documentation from a later release. For example, new feature content introduced in Release 12.4 or Release 12.2SX could supersede configuration content that is based on Release 12.2. Any Internet Protocol (IP) addresses used in this guide are not intended to be actual addresses. Any examples, configuration sample output, and figures included in this guide are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.Recommended Reading:
- About Cisco IOS Software Documentation
- Using the Command-Line Interface in Cisco IOS Software
- Cisco IOS Dial Technologies Command Reference
Browse all support information for Cisco IOS Release 12.2SR, or select another product.
Feedback