Cisco IOS Dial Services Configuration Guide: Terminal Services, Release 12.1 [Cisco IOS Software Releases 12.1 Mainline]



Cisco IOS Dial Services Configuration Guide: Terminal Services, Release 12.1 About the Cisco IOS Software Documentation Using Cisco IOS software Part 1: Preparing for Dial Access Interfaces, Controllers, and Lines Used for Dial Access Overview Preparing Asynchronous Interfaces Preparing Synchronous Serial Ports Part 3: ISDN and Signalling Configuration Setting Up Basic ISDN Service Configuring ISDN PRI and Other Signalling on E1 and T1 Configuring ISDN Special Signalling Configuring Virtual Asynchronous Traffic over ISDN Part 4: PPP Configuration Configuring Media-Independent PPP and Multilink PPP Configuring Asynchronous SLIP and PPP Part 5: Dial-on-Demand Routing Configuration Preparing to Configure DDR Configuring Legacy DDR Spokes Configuring Legacy DDR Hubs Configuring Peer-to-Peer DDR with Dialer Profiles Part 6: Dial-Backup Configuration Configuring Dial Backup for Serial Lines Configuring Dial Backup with Dialer Profiles Configuring Dial Backup Using Dialer Watch Part 7: Terminal Service Configuration Configuring Terminal Operating Characteristics for Dial-In Sessions Configuring AppleTalk Remote Access Configuring Dial-In Terminal Services Configuring Protocol Translation and Virtual Asynchronous Devices Configuring the Cisco PAD Facility for X.25 Connections Index	Cisco IOS Dial Services Configuration Guide: Terminal Services, Release 12.1 Click the links on the left to view the individual chapters in HTML format.
	© 1992-2008 Cisco Systems, Inc. All rights reserved. Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks of Cisco Systems, Inc.