Table Of Contents
Cisco uBR10012 Universal Broadband Router Documentation Roadmap
Configuration Examples and TechNotes
Cisco uBR10012 Universal Broadband Router Documentation Roadmap
Documentation Survey
Is Cisco documentation helpful? Click here or go to http://forums.cisco.com/eforum/servlet/viewsflash?cmd=showform&pollid=rtgdoc01!rtgdoc to give us your feedback.
Contents
Use this roadmap as an online directory to quickly access publications for your product. It corresponds to the Cisco uBR10012 documentation index page, and includes the following sections:
General Information
To open a document, click the link provided.
Compatibility Information
•
Software Advisor - Choose The Software For Your Network Device
Documentation Roadmaps
•
Cisco uBR10012 Universal Broadband Router Documentation Roadmap (this document)
Release Notes
•
Caveats for the Cisco uBR10012 Universal Broadband Router in Cisco IOS Release 12.2SC
•
Cross-Platform Release Notes for Cisco Universal Broadband Routers in Cisco IOS Release 12.2SC
•
Release Notes for the Cisco uBR10012 Universal Broadband Router for Cisco IOS Release 12.3BC
Download Software
To display the Downloads page, click here or go to http://www.cisco.com/public/sw-center/index.shtml.
Note
You must have a Cisco.com account to access the Downloads page. To register with Cisco.com, click here or go to http://tools.cisco.com/RPF/register/register.do.
Reference Guides
To open a document, click the link provided.
Command References
•
Cisco IOS CMTS Cable Command Reference
•
Command Lookup Tool for Cisco IOS
Technical References
•
Cisco CMTS Universal Broadband Series Router MIB Specifications Guide 12.2 BC
•
Cisco CMTS Universal Broadband Series Router MIB Specifications Guide 12.2(33) SCB
Design
To open a document, click the link provided.
Design Guides
•
Cisco Cable Wideband Solution Design and Implementation Guide, Release 1.0
•
Cisco DOCSIS 3.0 Downstream Solution Design and Implementation Guide, Release 2.0
Design TechNotes
•
Using the max-cpe Command in the DOCSIS and CMTS
Install and Upgrade
To open a document, click the link provided.
Install and Upgrade Guides
•
2400W AC-Input Power Shelf for the Cisco uBR10012 Universal Broadband Router
•
AC Power Entry Module for the Cisco uBR10012 Universal Broadband Router
•
Cabling the Cisco uBR10-MC5X20S/U/H Cable Interface Line Card with UCH2 - Quick Start Guide
•
Cabling the Cisco uBR10-MC5X20S/U/H Cable Interface Line Card with UCH1 - Quick Start Guide
•
Cisco LCD Module for the Cisco uBR10012 Universal Broadband Router
•
Cisco Performance Routing Engine (ESR-PRE2) Upgrade Installation
•
Cisco uBR10012 OC-48 DPT/POS Interface Module
•
Cisco uBR10012 Universal Broadband Router Fan Assembly Module
•
Cisco uBR10012 Universal Broadband Router Gigabit Ethernet Half-Height Line Card Installation
•
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
•
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide - Quick Start Guide
•
Cisco uBR10012 Universal Broadband Router Performance Routing Engine Module
•
Cisco uBR10012 Universal Broadband Router SIP and SPA Hardware Installation Guide
•
Cisco uBR10012 Universal Broadband Router TCC+ Card
•
Cisco uBR10012 Universal Broadband Router DTCC Card
•
Cisco uBR10-LCP2-MC28C Cable Interface Line Card for the Cisco uBR10012 Universal Broadband Router
•
Cisco uBR10-MC5X20S/U/H Cable Interface Line Cards - Hardware Installation Guide
•
Cisco uBR10-SRP-OC12SML/SMI DPT Adapter Card for the Cisco uBR10012 Universal Broadband Router
•
Cisco UBR-MC20X20V Cable Interface Line Card Hardware Installation Guide
•
DC Power Entry Module for the Cisco uBR10012 Universal Broadband Router
•
Installing Cisco uBR10-MC5X20S/U/H Cable Interface Line Cards - Quick Start Guide
•
Installing EMI Gaskets and RF Absorber Material on the Cisco uBR10012 Universal Broadband Router
•
Regulatory Compliance and Safety Information for the Cisco uBR10012 Universal Broadband Router
Install and Upgrade TechNotes
•
N+1 Solution for the uBR10012
Configure
To open a document, click the link provided.
Configuration Examples and TechNotes
•
Configuring cable modem remote-query Command
•
DOCSIS 1.0 Baseline Privacy on the Cisco CMTS
•
Using the max-cpe Command in the DOCSIS and CMTS
Configuration Guides
•
Cisco IOS CMTS Cable Software Configuration Guide, Release 12.2SC
•
Cisco uBR10012 Universal Broadband Router SIP and SPA Software Configuration Guide
•
Cisco uBR10012 Universal Broadband Router Software Configuration Guide
•
Configuring the Cisco UBR-MC20X20V Cable Interface Line Card
•
Configuring the Cisco uBR10-MC5X20S Broadband Processing Engine
•
Configuring the Cisco uBR10-MC5X20U/H Broadband Processing Engine
•
Configuring the Cisco uBR10-SRP-OC12SML DPT WAN Card
•
Route Processor Redundancy for the Cisco uBR10012 Universal Broadband Router
Feature Guides
•
New Features in Cisco IOS Release 12.3(23)BC1
•
New Features in Cisco IOS Release 12.3(23)BC2
•
New Features in Cisco IOS Release 12.2(33)SCA
•
New Features in Cisco IOS Release 12.2(33)SCB
•
New Features in Cisco IOS Release 12.2(33)SCC
Legacy Features
•
Control Point Discovery (CPD)
•
Default DOCSIS 1.0 ToS Overwrite
•
Generic Routing Encapsulation on the Cisco CMTS
Troubleshoot and Alerts
To open a document, click the link provided.
Error and System Messages
•
Cisco IOS CMTS Cable System Messages Guide
Field Notices
•
Field Notice: FN - 18103 - UBR10K LCP Does Not Recognize Certain Linecards Correctly
•
Field Notice: FN - 62168 - uBR10k: PRE May Crash When Executing the Command "Show Access-lists"
•
Field Notice: FN - 62645 - Bad Pointer in NVRAM
•
Field Notice: FN - 62695 - Cisco RF Switch Firmware Version 3.60 - Mandatory Upgrade
•
Field Notice: FN - 62766 - uBR10K Loses Partial Configuration After PRE Failover
•
Field Notice: uBR10k Chassis RF Shielding Update For PRE2 Processor Use
•
Field Notice: uBR10000 Proactive Upgrade of PRE to PRE1
Password Recovery
•
Password Recovery Procedure for the Cisco uBR7100, uBR7200, uBR10000 Universal Broadband Router
Troubleshooting Guides
•
Cisco uBR10012 Universal Broadband Router Troubleshooting Guide
•
Online Offline Diagnostics - Field Diagnostics on Cisco uBR10012 Router User's Guide
Troubleshooting TechNotes
•
DOCSIS 1.0 Baseline Privacy on the Cisco CMTS
•
N+1 Solution for the uBR10012
•
Using the max-cpe Command in the DOCSIS and CMTS
CCDE, CCENT, CCSI, Cisco Eos, Cisco HealthPresence, Cisco IronPort, the Cisco logo, Cisco Nurse Connect, Cisco Pulse, Cisco SensorBase, Cisco StackPower, Cisco StadiumVision, Cisco TelePresence, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, Flip Mino, Flipshare (Design), Flip Ultra, Flip Video, Flip Video (Design), Instant Broadband, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco Capital, Cisco Capital (Design), Cisco:Financed (Stylized), Cisco Store, Flip Gift Card, and One Million Acts of Green are service marks; and Access Registrar, Aironet, AllTouch, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Lumin, Cisco Nexus, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Continuum, EtherFast, EtherSwitch, Event Center, Explorer, Follow Me Browsing, GainMaker, iLYNX, IOS, iPhone, IronPort, the IronPort logo, Laser Link, LightStream, Linksys, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, PCNow, PIX, PowerKEY, PowerPanels, PowerTV, PowerTV (Design), PowerVu, Prisma, ProConnect, ROSA, SenderBase, SMARTnet, Spectrum Expert, StackWise, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0910R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2009 Cisco Systems, Inc. All rights reserved.

