vpc orphan-port suspend

To suspend a nonvirtual port channel (vPC) port when the peer link of a vPC secondary goes down, use the vpc orphan-port suspend command. To resume the non-vPC port, use the no form of this command.

vpc orphan-port suspend

no vpc orphan-port suspend

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Interface configuration mode

Command History

Release
Modification
5.0(3)N2(1)
This command was introduced.

Usage Guidelines

A non-vPC port, also known as an orphaned port, is a port that is not part of a vPC.

Examples

This example shows how to suspend an orphan port:

switch(config)# interface ethernet 1/20
switch(config-if)# vpc orphan-port suspend
switch(config-if)#
 

Related Commands

Command
Description
show vpc brief
Displays brief information about the vPCs.
show vpc orphan-ports
Displays information about orphan ports.