Guest

802.1Q

Introduction

Set of IEEE standards for the definition of LAN protocols.
Configure

Configuration Examples and TechNotes

(All Virtual LANs%2FVLAN Trunking Protocol (VLANs%2FVTP) Configuration Examples and TechNotes)

802.1Q Trunking Between Catalyst Switches Running CatOS

802.1Q Trunking Between Catalyst Switches Running CatOS and Cisco IOS System Software

802.1q Trunking on the CSS 11x00 Configuration Example

Best Practices for Catalyst 4500/4000, 5500/5000, and 6500/6000 Series Switches Running CatOS Configuration and Management

Catalyst 2948G-L3 Sample Configurations - Full Device Configurations

Comparing Layer 2 Operations in CatOS and Cisco IOS System Software on the Catalyst 6500/6000

Configuring 802.1Q Trunking Between a Catalyst 3550/3560/3750 and Catalyst Switches That Run Cisco IOS Software

Configuring EtherChannel and 802.1Q Trunking Between Catalyst L2 Fixed Configuration Switches and Catalyst Switches Running CatOS

Configuring EtherChannel and 802.1Q Trunking Between Catalyst L2 Fixed Configuration Switches and a Router (InterVLAN Routing)

Configuring EtherChannel and 802.1Q Trunking with Catalyst 2948G-L3s and CatOS Based Switches (ZIP - 37 KB)

Configuring FEC and ISL/802.1q Trunking Between a CatOS Switch and External Router (ZIP - 51 KB)

Configuring ISL and 802.1q Trunking Between a CatOS Switch and an External Router (InterVLAN Routing)

Configuring InterVLAN Routing and ISL/802.1Q Trunking on a Catalyst 2900XL/3500XL/2950 Switch Using an External Router

Configuring Layer 2 EtherChannel and Trunking Between 2900XL/3500XL/2950 Series Switches and Catalyst Switches That Run Cisco IOS Software

EtherChannel and 802.1Q Trunks Between Catalyst XL Switches and Catalyst Layer 2 Fixed Configuration Switches Configuration Example

EtherChannel and Trunking Between Catalyst Layer 2 Switches and 2948G-L3/4908G-L3 Switches Configuration Example

ISL and 802.1Q Trunking Between Catalyst Layer 2 Fixed Configuration Switches and CatOS Switches Configuration Example

Trunk Between a Catalyst 2948G-L3 and Catalyst 6500 Series Switch Configuration Example

Trunking Between Catalyst 4500/4000, 5500/5000, and 6500/6000 Series Switches Using 802.1Q Encapsulation with Cisco CatOS System Software