Cisco Wireless LAN Controller System Message Guide 7.0.116.0
FDB FIPS HIFN and HREAP System Messages
Downloads: This chapterpdf (PDF - 119.0KB) The complete bookPDF (PDF - 15.84MB) | Feedback

FDB FIPS HIFN and HREAP System Messages

Table Of Contents

FDB FIPS HIFN and HREAP System Messages

FDB Messages

FIPS Messages

HIFN Messages

HREAP Messages


FDB FIPS HIFN and HREAP System Messages


This chapter contains the following topics:

FDB Messages

FIPS Messages

HIFN Messages

HREAP Messages

FDB Messages

This section contains FDB subsystem (FDB) messages.

Error Message    %FDB-0-MSGTAG001: Failed to Create fdb Task.. 

Explanation    The system has failed to create an FDB task.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %FDB-3-MSGTAG002: Error retrieving file [chars]. 

Explanation    An error has occurred when retrieving the file [chars].

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %FDB-3-MSGTAG003: LIF: Unable to register for VLAN change callback. 

Explanation    LIF: The system is unabled to register for a VLAN change callback.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %FDB-3-MSGTAG004: Error on call to osapiFsWrite routine on config file 
[chars]. 

Explanation    An error on a call to the osapiFsWrite routine in the configuration file [chars].

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %FDB-3-MSGTAG005: fdb Task: Failed to create, exiting..... 

Explanation    fdb Task: The system has failed to create the FDB task and is now exiting.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

FIPS Messages

This section contains Federal Information Processing Standards (FIPS) messages.

Error Message    %FIPS-3-AP_ZEROIZATION_FAILED: Unable to zeroize the AP key. [chars]. 

Explanation    FIPS requires a mechanism to zeroize a critical security parameter. An error occurred while trying to zeroize the AP secret.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %FIPS-3-LOADCONF_FAILED: Unable to load configuration. 

Explanation    The system has failed to load the FIPS configuration.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %FIPS-3-ZEROIZATION_FAILED: Unable to reset the system key. [chars]. 

Explanation    FIPS requires a mechanism to reset a critical security parameter. An error was occurred while trying to reset the system key.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %FIPS-3-ZEROIZE_AP_FAILED: Unable to reset the AP key. [chars]. 

Explanation    The system is unable to reset the AP key.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %FIPS-3-ZEROIZE_CFM_SEND_FAILED: Unable to reset the AP key. [chars]. 

Explanation    An error has occurred while trying to confirm an AP key reset.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %FIPS-3-ZEROIZE_REQ_SEND_FAILED: Unable to reset the AP key. [chars]. 

Explanation    An error has occurred while trying to send a reset key request to the AP.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %FIPS-4-DUPLICATE_NDRNG_OUTPUT: Duplicate non-deterministic RNG 
output. Auto-seeding... 

Explanation    A FIPS continuous RNG test has failed. FIPS requires that two consecutive NDRNG blocks must not be the same.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %FIPS-4-DUPLICATE_RNG_OUTPUT: Duplicate FIPS 186-2 RNG output. 
Auto-seeding... 

Explanation    A FIPS continuous RNG test has failed. FIPS requires that two consecutive RNG blocks must not be the same.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %FIPS-4-PREREQMODE_SET_FAILED: Unable to set FIPS prerequisite mode 
because it is already [chars]. 

Explanation    The FIPS prerequisite mode is already set.

Recommended Action    No action is required.

Error Message    %FIPS-4-RNGSEEDKEY_MATCHED: FIPS 186-2 Seed matches Seed Key. 
Auto-seeding... 

Explanation    FIPS requires that the RNG seed must not be the same as the RNG seed key.

Recommended Action    No action is required.

Recommended Action   

Error Message    %FIPS-6-AP_ZEROIZATION: AP key zeroization initiated. 

Explanation    FIPS requires a mechanism to zeroize a critical security parameter.

Recommended Action    No action is required.

HIFN Messages

This section contains HIFN subsystem (HIFN) messages.

Error Message    %HIFN-3-DHMAPMEM: error return [dec] while mapping DH structs 

Explanation    A call for mapping various structures for the public key and the private key has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %HIFN-3-DHMEMOVERRUN: Memory overrun in DH parameter 

Explanation    An error has occurred when some tasks overwrite into DH structure memories. A memory overrun has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %HIFN-3-DHSYNCEXECFAIL: error return [dec] while execution of command 

Explanation    A call to execute a command on the security processor has returned a failure.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

HREAP Messages

This section contains hybrid remote-edge access point (HREAP) messages.

Error Message    %HREAP-3-MSGTAG001: Unable to write hreap configuration file. 

Explanation    Unable to write the HREAP configuration file.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %HREAP-6-MSGTAG002: Configuration file version < 4.2.2.3 

Explanation    The configuration file is a version earlier than software release 4.2.2.3.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Recommended Action