CLI CLIWEB and CNFGR System Messages
This chapter contains the following topics:
•CLI Messages
•CLIWEB Messages
•CNFGR Messages
CLI Messages
This section contains command-line interface (CLI) messages.
Error Message %CLI-3-INVALID_AP_KEY: Invalid AP Hash Key Provided
Explanation Invalid AP Hash Key Provided.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CLI-3-LOGIN_FAILED: Login failed. User:[chars], Service type:[dec].
[chars].
Explanation Login failed.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CLI-1-TRACE_LEVEL_ALERT: Level Alert.
Explanation To test if tracelevel Alert is enabled or not
Recommended Action No action to be taken. This is for testing purpose
Error Message %CLI-2-TRACE_LEVEL_CRIT: Level Critical.
Explanation To test if tracelevel Critical is enabled or not
Recommended Action No action to be taken. This is for testing purpose
Error Message %CLI-7-TRACE_LEVEL_DEB: Level Debug.
Explanation To test if tracelevel Debug is enabled or not
Recommended Action No action to be taken. This is for testing purpose
Error Message %CLI-0-TRACE_LEVEL_EMER: Level Emergency.
Explanation To test if tracelevel Emergency is enabled or not
Recommended Action No action to be taken. This is for testing purpose
Error Message %CLI-3-TRACE_LEVEL_ERR: Level Error.
Explanation To test if tracelevel Error is enabled or not
Recommended Action No action to be taken. This is for testing purpose
Error Message %CLI-6-TRACE_LEVEL_INFO: Level information.
Explanation To test if tracelevel Information is enabled or not
Recommended Action No action to be taken. This is for testing purpose
Error Message %CLI-5-TRACE_LEVEL_NOT: Level Notice.
Explanation To test if tracelevel Notice is enabled or not
Recommended Action No action to be taken. This is for testing purpose
Error Message %CLI-4-TRACE_LEVEL_WARN: Level Warning.
Explanation To test if tracelevel Warning is enabled or not
Recommended Action No action to be taken. This is for testing purpose
CLIWEB Messages
This section contains web command-line interface (CLIWEB) messages.
Error Message %CLIWEB-3-BAD_LOGO_FILENAME: File [chars] does not exist as a logo.
Clearing..
Explanation File does not exist as a logo. Clearing..
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CLIWEB-3-BUFFER_TOO_LONG: Buffer for [chars] too long (max = [dec]
chars).
Explanation Buffer is too long.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CLIWEB-3-BUFFER_TOO_SMALL: Buffer for [chars] too small
Explanation Buffer is too small.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CLIWEB-3-INDEX_OUT_OF_RANGE: Index:[chars] out of range [dec] (max =
[dec]).
Explanation Index is out of range.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CLIWEB-3-INIT_FAILED: Unable to initialize. Reason: [chars].
Explanation Unable to initialize.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CLIWEB-3-INVALID_PORT_SPEED: Unknown Port Speed found for interface
[dec]/[dec]/[dec].
Explanation Unknown Port Speed found for interface.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CLIWEB-3-SOCKET_OPER_FAILED: Failed to [chars] the Java Socket.
Explanation Failure in a Java Socket.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CLIWEB-3-WEBAUTH_ENABLE_FAILED: External Web Auth cannot be enabled.
[chars].
Explanation External Web Auth cannot be enabled.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CLIWEB-3-WEBAUTH_TYPESET_FAILED: External Web Auth type cannot be
set. [chars].
Explanation External Web Auth type cannot be set.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CLIWEB-3-WEBSRVR_IPSET_FAILED: Unable to set External Web Server.
[chars].
Explanation Unable to set External Web Server.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
CNFGR Messages
This section contains configuration (CNFGR) messages.
Error Message %CNFGR-3-DUP_REGISTRATION: sysCfgChange registrar_ID [dec] already
registered.
Explanation The specified Registrar ID has already registered for notifications from this module.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CNFGR-3-GET_REGISTRY_FAIL: sysCfgChange [chars] not set.
Explanation Failed to get the registry for the specified component.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CNFGR-0-INVALID_STARTUP_SEQ: cfgHardwareDectectCallback Invalid
startup sequence.
Explanation cfgHardwareDectectCallback invalid startup sequence.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CNFGR-3-INV_COMP_ID: Invalid Component Id : [chars] ([dec]) in
cfgConfiguratorInit.
Explanation Invalid component being requested for initialization.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message CNFGR-0-LIC_AP_COUNT_CHANGE: AP count change: Handle = 0x%x, Type =
%d\n.
Explanation The number of access points has changed.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CNFGR-3-L2_SYS_INIT_FAIL: Cannot initialize a required function:
Layer2.
Explanation Could not perform Layer 2 system initialization.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CNFGR-3-MAX_REGISTRATIONS: sysCfgChange registrar_ID [dec] greater
then LAST_COMPONENT_ID.
Explanation A maximum number of registrations has been exceeded for this module.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message %CNFGR-3-MGMT_IF_SET_FAIL: cfgHardwareDectectCallback: couldn't set
mgmt vlan for vlan id [dec].
Explanation Could not set the management interface.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/cisco/web/support/index.html. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.
Recommended Action
Text Part Number: