|
|
|
|
|
Alias |
Required |
Required |
Required |
The unique text name for the user account. Any combination of ASCII or unicode alphanumeric characters, periods, commas, spaces, and the special characters `, ~, !, @, #, $, %, ^, &, -, _, ', up to a maximum of 64 characters. You should use only printable ASCII characters in the Alias field, because some messaging features do not support non-printing ASCII characters or Unicode. (The non-printing ASCII control characters are those below code 0x20.) For example, IMAP only supports user names that contain printable ASCII characters, so users with aliases that contain non-printing characters or unicode are unable to access their Connection messages via IMAP clients. In addition, the Cisco Object Backup and Restore Application Suite (COBRAS) is unable to back up messages for such users, because COBRAS uses IMAP to perform the backup. |
Extension (Users With Mailbox Only) |
Required |
Optional |
N/A |
The number that callers dial to reach the user. The value must be unique among users in the partition. Any combination of ASCII alphanumeric characters, from 3 to 40 characters long. |
TemplateAlias |
Required |
N/A |
N/A |
The unique text name for the user template to apply to the account during creation.
Caution If you specify an administrator template for TemplateAlias, the users do not have mailboxes.
|
Password |
Optional |
Optional |
N/A |
The unique characters that the user enters to access Unity Connection web applications. Any combination of alphanumeric characters, and the following special characters: ~!@#$%^&*()-_+={}|[]:"';<>?/\., To help protect Unity Connection from unauthorized access and toll fraud, enter a long, eight or more characters and non-trivial password. |
PIN (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The unique digits that the user enters to access voice messages by phone. Any combination of digits 0 through 9. To help protect Unity Connection from unauthorized access and toll fraud, enter a long—six or more digits—and non-trivial PIN. |
Address |
Optional |
Optional |
N/A |
The physical address, such as a house number and street name where the user is located, or with which the user is associated. Any combination of ASCII or unicode characters up to a maximum of 128 characters. |
AltFirstNames (Users With Mailbox Only) |
Optional |
Optional |
N/A |
An alternate version of the first name. Unity Connection considers alternate names when users and callers use voice recognition to place a call or address voice messages. To create/update more than one alternate first name per user, separate them by semicolons (;). If an alternate name needs to contain a semicolon, precede the semicolon with another semicolon to indicate to Unity Connection that the name contains a semicolon. Use this field in conjunction with the AltLastNames field to add nicknames or maiden names for users. You can also use alternate names to add phonetic spellings of hard-to-pronounce names. Alternate first names and alternate last names are stored as a pair in the database. When submitting multiple alternate names, make sure that you have the same number of alternate first names and alternate last names. For example, if you have a user named Elizabeth Brown, who is sometimes known as “Liz” and sometimes known by her maiden name of “Smith,” you would enter the following AltFirstNames and AltLastNames to ensure that all four combinations are submitted to the database:
- Elizabeth; Liz; Elizabeth; Liz
- Brown; Brown; Smith; Smith
|
AltLastNames (Users With Mailbox Only) |
Optional |
Optional |
N/A |
An alternate version of the last name. Unity Connection considers alternate names when users and callers use voice recognition to place a call or address voice messages. To create/update more than one alternate last name per user, separate them by semicolons (;). If an alternate name needs to contain a semicolon, precede the semicolon with another semicolon to indicate to Unity Connection that the name contains a semicolon. Use this field in conjunction with the AltFirstNames field to add nicknames or maiden names for users. You can also use alternate names to add phonetic spellings of hard-to-pronounce names. Alternate first names and alternate last names are stored as a pair in the database. When submitting multiple alternate names, make sure that you have the same number of alternate first names and alternate last names. For example, if you have a user named Elizabeth Brown, who is sometimes known as “Liz” and sometimes known by her maiden name of “Smith,” you would enter the following AltFirstNames and AltLastNames to ensure that all four combinations are submitted to the database:
- Elizabeth; Liz; Elizabeth; Liz
- Brown; Brown; Smith; Smith
|
AltFirstName (Users With Mailbox Only) |
Optional |
Optional |
N/A |
An alternate spelling of the user first name in an internationally recognizable format (i.e., ASCII only characters). The value is used by the phone interface to search for users and to address messages. Any combination of ASCII alphanumeric characters up to maximum of 64 characters. |
AltLastName (Users With Mailbox Only) |
Optional |
Optional |
N/A |
An alternate spelling of the user last name in an internationally recognizable format (i.e., ASCII only characters). The value is used by the phone interface to search for users and to address messages. Any combination of ASCII alphanumeric characters up to maximum of 64 characters. |
BillingId |
Optional |
Optional |
N/A |
Organization-specific information about the user, such as accounting information, department names, or project codes. The information can be included in user reports. Any combination of digits from 0 through 9 up to a maximum of 32 digits. |
Building |
Optional |
Optional |
N/A |
The name of the building where the user is based. Any combination of ASCII or unicode characters up to a maximum of 64 characters. |
City |
Optional |
Optional |
N/A |
The name of a locality, such as a city or other geographic region where the user is located, or with which the user is associated. Any combination of ASCII or unicode characters up to a maximum of 64 characters. |
Country |
Optional |
Optional |
N/A |
The two letter ISO 3166-1 country code where the user is located, or with which the user is associated. Two ASCII lower or upper case alpha characters. |
Department |
Optional |
Optional |
N/A |
The name or number for the department or sub division of an organization to which the user belongs. Any combination of ASCII or unicode characters up to a maximum of 64 characters. |
DisplayName |
Optional |
Optional |
N/A |
The user name that appears on the administration and user interfaces. If Displayname is empty and both Firstname, Lastname are present, then Displayname would be combination of "Firstname Lastname", else Displayname would be Alias. Any combination of ASCII or unicode characters up to a maximum of 64 characters. |
DisplayName (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The user name that appears on the administration and user interfaces. If Displayname is empty and both Firstname, Lastname are present, then Displayname would be combination of "Firstname Lastname", else Displayname would be Alias. Any combination of ASCII or unicode characters up to a maximum of 64 characters. |
EmailAddress |
Optional |
Optional |
N/A |
The email address of the user. This corresponds to the Corporate Email Address field in Cisco Unity Connection Administration.
Note The field is only for directory information purposes. Unity Connection does not use the address to deliver incoming messages.
Any combination of ASCII alphanumeric characters, and the special characters hyphen, underscore, period and at sign (“@”), up to a maximum of 320 characters. |
MailName (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Name used to construct part of SMTP address before the @ sign. A name is needed for unicode aliases that cannot be converted into a valid SMTP addresses. |
EmployeeId |
Optional |
Optional |
N/A |
The numeric or alphanumeric identifier assigned to a user, typically based on order of hire or association with an organization. Any combination of ASCII or unicode characters up to a maximum of 64 characters. |
EnhancedSecurityAlias |
Optional |
Optional |
N/A |
The unique text name used to identify and authenticate the user with an RSA SecurID security system. Any combination of ASCII or unicode characters up to a maximum of 50 characters. |
FirstName |
Optional |
Optional |
N/A |
The user first name. Any combination of ANSI or Unicode alphanumeric characters, periods, commas, spaces, and the special characters `, ~, !, @, #, $, %, ^, &, -, _, ', up to a maximum of 64 characters. |
Initials |
Optional |
Optional |
N/A |
The initials of part or all of the user name. Any combination of ANSI or unicode alphanumeric characters, periods, commas, spaces, and the special characters `, ~, !, @, #, $, %, ^, &, -, _, ', up to a maximum of 6 characters. |
Language |
Optional |
Optional |
N/A |
The preferred language of the user. Use the Windows language code, such as 1033 for U.S. English. For a list of supported languages and the corresponding language codes, see the “Numeric and Alphabetic Codes for Supported Languages” section in the System Requirements for Cisco Unity Connection 10.x at http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/requirements/10xcucsysreqs.html#pgfId-172173. |
LastName |
Optional |
Optional |
N/A |
The user last name. Any combination of ANSI or unicode alphanumeric characters, periods, commas, spaces, and the special characters `, ~, !, @, #, $, %, ^, &, -, _, ', up to a maximum of 64 characters. |
Manager |
Optional |
Optional |
N/A |
The name of the manager or supervisor of the user. Any combination of ASCII or unicode characters up to a maximum of 64 characters. |
PostalCode |
Optional |
Optional |
N/A |
For users located in the United States, the zip code where the user is located, or with which the user is associated. For users located in Canada, Mexico, and other countries, the postal code where the user is located, or with which the user is associated. Any combination of ASCII or unicode characters up to a maximum of 40 characters. |
State |
Optional |
Optional |
N/A |
The full name of the state or province where the user is located, or with which the user is associated. Any combination of ASCII or unicode characters up to a maximum of 64 characters. |
TimeZone |
Optional |
Optional |
N/A |
The time zone with which the user account is associated. |
Title |
Optional |
Optional |
N/A |
The position or function of the user within the organization, for example “Vice President.” Any combination of ASCII or unicode characters up to a maximum of 64 characters. |
COSDisplayName (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The unique text name that is displayed on the user interfaces for the class of service (COS) with which the user account is associated. Any combination of ASCII or Unicode characters, up to a maximum of 64 characters. |
ClientMatterCode (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The required Client Matter Code (CMC) to transmit to Cisco Unified Communications Manager (CM), if applicable, when the user makes an outbound call. CMCs are typically used to enable the system to track calls for account or billing purposes. The value is used only if the system is using Cisco Unified CM and if the version of Cisco Unified CM is 4.1 and later. Whether the CMC is transmitted depends on the setting for outbound calls. The user CMC is used only if the outbound call does not have its own CMC. The code length can be from 1 through 40 characters. |
TransferType (Users With Mailbox Only) |
Optional |
Optional |
N/A |
(Applicable only to the Alternate transfer rule.) Determines the way in which Unity Connection transfers calls from the automated attendant or a directory handler to the user phone for the Alternate transfer rule:
- 0—supervised
- 1—unsupervised (also called a “Release to Switch” transfer)
|
TransferRings (Users With Mailbox Only) |
Optional |
Optional |
N/A |
(Applicable only to the Alternate transfer rule.) Determines the number of times the user extension rings before Unity Connection considers the call unanswered (“ring-no-answer”) and plays the applicable greeting. This setting is applicable only when the TransferType is configured for a supervised transfer. An integer value from 2 through 100. |
TransferExtension (Users With Mailbox Only) |
Optional |
Optional |
N/A |
(Applicable only to the Alternate transfer rule.) The phone number that Unity Connection transfers calls to if TransferAction is set to 1. |
TransferAction (Users With Mailbox Only) |
Optional |
Optional |
N/A |
(Applicable only to the Alternate transfer rule.) Determines whether Unity Connection transfers the incoming calls for the user to the user greeting or to the extension specified in TransferExtension:
- 0—Transfer to the greeting.
- 1—Transfer to TransferExtension.
|
RnaAction (Users With Mailbox Only) |
Optional |
Optional |
N/A |
(Applicable only to the Alternate transfer rule.) This setting is applicable only when the TransferType is configured for a supervised transfer. Determines whether Unity Connection transfers the call to the applicable greeting or releases the call to the phone system when a call is unanswered (“ring-no-answer”):
- 0—Release the call to the phone system.
- 1—After the number of rings specified in the TransferRings field, transfer the call to the appropriate greeting.
|
StandardTransferType (Users With Mailbox Only) |
Optional |
Optional |
N/A |
(Applicable only to the Standard transfer rule.) Determines the way in which Unity Connection transfers calls from the automated attendant or a directory handler to the user phone for the standard (default) transfer rule:
- 0—supervised
- 1—unsupervised (also called a “Release to Switch” transfer)
|
StandardTransferRings (Users With Mailbox Only) |
Optional |
Optional |
N/A |
(Applicable only to the Standard transfer rule.) Determines the number of times the user extension rings before Unity Connection considers the call unanswered (“ring-no-answer”) and plays the applicable greeting. This setting is applicable only when the StandardTransferType is configured for a supervised transfer. An integer value from 2 through 100. |
StandardTransferExtension (Users With Mailbox Only) |
Optional |
Optional |
N/A |
(Applicable only to the Standard transfer rule.) The phone number that Unity Connection transfers calls to if StandardTransferAction is set to 1. |
StandardTransferAction |
Optional |
Optional |
N/A |
(Applicable only to the Standard transfer rule.) Determines whether Unity Connection transfers the incoming calls for the user to the user greeting or to the extension specified in StandardTransferExtension:
- 0—Transfer to the greeting.
- 1—Transfer to StandardTransferExtension.
|
StandardRnaAction (Users With Mailbox Only) |
Optional |
Optional |
N/A |
(Applicable only to the Standard transfer rule.) This setting is applicable only when the StandardTransferType is configured for a supervised transfer. Determines whether Unity Connection transfers the call to the applicable greeting or releases the call to the phone system when a call is unanswered (“ring-no-answer”):
- 0—Release the call to the phone system.
- 1—After the number of rings specified in the StandardTransferRings field, transfer the call to the appropriate greeting.
|
ClosedTransferType (Users With Mailbox Only) |
Optional |
Optional |
N/A |
(Applicable only to the Closed transfer rule.) Determines the way in which Unity Connection transfers calls from the automated attendant or a directory handler to the user phone for the Closed transfer rule:
- 0—supervised
- 1—unsupervised (also called a “Release to Switch” transfer)
|
ClosedTransferRings (Users With Mailbox Only) |
Optional |
Optional |
N/A |
(Applicable only to the Closed transfer rule.) Determines the number of times the user extension rings before Unity Connection considers the call unanswered (“ring-no-answer”) and plays the applicable greeting. This setting is applicable only when the ClosedTransferType is configured for a supervised transfer. An integer value from 2 through 100. |
ClosedTransferExtension (Users With Mailbox Only) |
Optional |
Optional |
N/A |
(Applicable only to the Closed transfer rule.) The phone number that Unity Connection transfers calls to if ClosedTransferAction is set to 1. |
ClosedTransferAction (Users With Mailbox Only) |
Optional |
Optional |
N/A |
(Applicable only to the Closed transfer rule.) Determines whether Cisco Unity Connection transfers the incoming calls for the user to the user greeting or to the extension specified in ClosedTransferExtension:
- 0—Transfer to the greeting.
- 1—Transfer to ClosedTransferExtension.
|
ClosedRnaAction (Users With Mailbox Only) |
Optional |
Optional |
N/A |
(Applicable only to the Closed transfer rule.) This setting is applicable only when the StandardTransferType is configured for a supervised transfer. Determines whether Unity Connection transfers the call to the applicable greeting or releases the call to the phone system when a call is unanswered (“ring-no-answer”):
- 0—Release the call to the phone system.
- 1—After the number of rings specified in the ClosedTransferRings field, transfer the call to the appropriate greeting.
|
MWIExtension (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The phone number (extension) of the default message waiting indicator (MWI) to light when callers leave messages for the user. If no value is provided, Unity Connection uses the number of the primary extension. |
MWIMediaSwitchDisplay Name (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The text name displayed on the system administration interface of the phone system used to turn message waiting indicators on and off for the phone number specified in the MWIExtension column. If no value is provided, Unity Connection uses the phone system specified in the MediaSwitchDisplayName column. |
MaxMsgLen (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The maximum duration (in seconds) for recording a message from an outside (unidentified) caller. The length specified can be from 1 through 1,200 seconds. |
Play After Message Recording (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Indicates whether Unity Connection plays a recording to the callers after a message has been sent:
- 0—Do Not Play Recording. Select this setting to disable the feature. After a message is sent, users do not hear any recording.
- 1—System Default Recording. After a message is sent, users hear the default system recording.
- 2—Play Recording. After a message is sent, users hear the cutomized recording.
Note By Default the System Default Recording option is selected.
|
PlayPostGreetingRecording (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Indicates whether Unity Connection plays a recording to callers before allowing them to leave a message for the user. You can also indicate whether all callers hear the recording or only unidentified callers:
- 0—Do Not Play Recording. Select this setting to disable the feature. Before they leave a message, callers hear only the user greeting.
- 1—Play Recording to All Callers. Before they leave a message, users and outside callers hear the user or call handler greeting and then the recording.
- 2—Play Recording Only to Unidentified Callers. Before they leave a message, outside callers hear the user greeting and then the post-greeting recording. Likewise, users who call from a phone that is not associated with their account and do not sign in to Unity Connection hear the post-greeting recording.
|
PostGreetingRecordingDisplayName (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The display name of the post-greeting recording that plays after the greeting for this user. |
ForcedAuthoizationCode (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The required forced-authorization code (FACs) to transmit to Cisco Unified Communications Manager, if applicable, when the user makes an outbound call. Your organization may use FACs to prevent toll fraud. For example, users may have to provide FACs to place long-distance calls. The value is used only if the system is using Cisco Unified CM and its version is 4.1 and later. The code length can be from 1 to 40 characters. |
ListInDirectory (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Determines whether the user is included in the phone directory for outside callers:
- 0—Not included in the directory
- 1—Included in the directory
|
CreateSmtpProxyFromCorp (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Determines whether Unity Connection uses the value in the EmailAddress column (Corporate Email Address field in Cisco Unity Connection Administration) to automatically create a new SMTP proxy address, so that IMAP messages to or from this email address can be properly identified by Unity Connection as belonging to this user. If you uncheck it, no such SMTP proxy address is automatically created.
- 0—SMTP proxy address is not automatically created.
- 1—SMTP proxy address is automatically created using the Corporate Email Address field.
|
MediaSwitchDisplayName (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The text name displayed on the system administration interface of the phone system used for Telephone Record and Playback (TRAP) sessions and to turn message waiting indicators on and off. Any combination of ASCII or unicode characters up to a maximum of 64 characters. |
PhoneNumber_HomePhone (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The user home phone number. Any combination of the digits 0–9, T, t, commas, hashes (#), and asterisks (*), up to a maximum of 38 characters. |
Active_HomePhone (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Whether the user home phone device is enabled:
|
DisplayName_HomePhone (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The text name for the user home phone displayed on the Unity Connection interfaces. Any combination of ASCII or Unicode characters, up to a maximum of 64 characters. |
PhoneNumber_WorkPhone (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The user work phone number. Any combination of the digits 0–9, T, t, commas, hashes (#), and asterisks (*), up to a maximum of 38 characters. |
Active_WorkPhone (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Whether the user work phone device is enabled:
|
DisplayName_WorkPhone (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The text name for the user work phone displayed on the Unity Connection interfaces. Any combination of ASCII or unicode characters up to a maximum of 64 characters. |
PhoneNumber_MobilePhone (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The user mobile phone number. Any combination of the digits 0–9, T, t, commas, hashes (#), and asterisks (*), up to a maximum of 38 characters. |
Active_MobilePhone (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Whether the user mobile phone device is enabled:
|
DisplayName_MobilePhone (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The text name for the user mobile phone displayed on the Unity Connection interfaces. Any combination of ASCII or unicode characters up to a maximum of 64 characters. |
PhoneNumber_Pager (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The user pager number. Any combination of the digits 0–9, T, t, commas, hashes (#), and asterisks (*), up to a maximum of 38 characters. |
AfterDialDigits_Pager (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Digits to send to the pager. This is referred to in Unity Connection Administration as “Extra Digits.” For numeric pagers, the field holds numeric text to send to the pager; for text pagers, the field is blank. The maximum length is 32 digits. |
Active_Pager (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Whether the user pager device is enabled:
|
DisplayName_Pager (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The text name for the user pager displayed on the Unity Connection interfaces. Any combination of ASCII or unicode characters up to a maximum of 64 characters. |
PhoneNumber_TextPager1 (Users With Mailbox Only) |
Optional |
Optional |
N/A |
This phone number is entered in the From field on the default SMTP device for the user. Any combination of ASCII only alphanumeric characters, hyphens, underscores, periods, at signs (“@”), commas and hashes (#), up to a maximum of 40 characters. |
SmtpAddress_TextPager1 (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Message notifications for the user are sent to this SMTP address.
Note The SMTP address cannot include non-ASCII characters.
|
Active_TextPager1 (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Whether the user text pager device is enabled:
|
DisplayName_TextPager1 (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The text name for the user text pager displayed on the Unity Connection interfaces. Any combination of ASCII or unicode characters up to a maximum of 64 characters. |
Extension_Alt1 (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The first alternate extension for the user. The value must be unique in the partition. Any combination of ASCII alphanumeric characters, from 1 to 40 characters long. |
Extension_Alt1_Partition (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The text name of the partition to which the first alternate extension belongs. |
Extension_Alt2 (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The second alternate extension for the user. The value must be unique in the partition. Any combination of ASCII alphanumeric characters, from 1 to 40 characters long. |
Extension_Alt2_Partition (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The text name of the partition to which the second alternate extension belongs. |
Extension_Alt3 (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The third alternate extension for the user. The value must be unique in the partition. Any combination of ASCII alphanumeric characters, from 1 to 40 characters long. |
Extension_Alt3_Partition (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The text name of the partition to which the third alternate extension belongs. |
Extension_Alt4 (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The fourth alternate extension for the user. The value must be unique in the partition. Any combination of ASCII alphanumeric characters, from 1 to 40 characters long. |
Extension_Alt4_Partition (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The text name of the partition to which the fourth alternate extension belongs. |
Extension_Alt5 (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The fifth alternate extension for the user. The value must be unique in the partition. Any combination of ASCII alphanumeric characters, from 1 to 40 characters long. |
Extension_Alt5_Partition (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The text name of the partition to which the fifth alternate extension belongs. |
Extension_Alt6 (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The sixth alternate extension for the user. The value must be unique in the partition. Any combination of ASCII alphanumeric characters, from 1 to 40 characters long. |
Extension_Alt6_Partition (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The text name of the partition to which the sixth alternate extension belongs. |
Extension_Alt7 (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The seventh alternate extension for the user. The value must be unique in the partition. Any combination of ASCII alphanumeric characters, from 1 to 40 characters long. |
Extension_Alt7_Partition |
Optional |
Optional |
N/A |
The text name of the partition to which the seventh alternate extension belongs. |
Extension_Alt8 (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The eighth alternate extension for the user. The value must be unique in the partition. Any combination of ASCII alphanumeric characters, from 1 to 40 characters long. |
Extension_Alt8_Partition (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The text name of the partition to which the eighth alternate extension belongs. |
Extension_Alt9 (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The ninth alternate extension for the user. The value must be unique in the partition. Any combination of ASCII alphanumeric characters, from 1 to 40 characters long. |
Extension_Alt9_Partition (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The text name of the partition to which the ninth alternate extension belongs. |
CcmId (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The Cisco Unified Communications Manager user ID that is associated with the user. Any combination of characters except for non-printing ASCII characters, up to a maximum of 128 characters. |
Exchange2003Service_Service DisplayName (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The display name of the Exchange 2003 external service that corresponds with the Exchange 2003 server that contains the Exchange 2003 mailbox for this user. To add an Exchange 2003 external service for a user, include values for both the Exchange2003Service_ServiceDisplayName and Exchange2003Service_EmailAddress fields in the CSV input file. To remove the Exchange 2003 service for a user, set at least one of either the Exchange2003Service_ServiceDisplayName and Exchange2003Service_EmailAddress fields to %null% in the CSV input file. |
Exchange2003Service_Email Address (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The primary email address that is associated with the Exchange mailbox that you want this user to be able to access. To add an Exchange 2003 external service for a user, include values for both the Exchange2003Service_ServiceDisplayName and Exchange2003Service_EmailAddress fields in the CSV input file. |
Exchange2003Service_UserId (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The User ID setting in Exchange 2003 (useful when the setting is different from the user alias). To add an Exchange 2003 external service for a user, include values for both the Exchange2003Service_ServiceDisplayName and Exchange2003Service_EmailAddress fields in the CSV input file. |
Exchange2007Service_Service DisplayName (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The display name of the Exchange 2007 external service that corresponds with the Exchange 2007 server that contains the Exchange 2007 mailbox for this user. To add an Exchange 2007 external service for a user, include values for both the Exchange2007Service_ServiceDisplayName and Exchange2007Service_EmailAddress fields in the CSV input file. To remove the Exchange 2007 service for a user, set at least one of either the Exchange2007Service_ServiceDisplayName and Exchange2007Service_EmailAddress fields to %null% in the CSV input file. |
Exchange2007Service_Email Address (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The primary email address that is associated with the Exchange mailbox that you want this user to be able to access. To add an Exchange 2007 external service for a user, include values for both the Exchange2007Service_ServiceDisplayName and Exchange2007Service_EmailAddress fields in the CSV input file. |
Exchange2007Service_UserId (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The Windows domain alias for the user in Exchange 2007 (useful when the setting is different from the user alias). |
Exchange2007Service_User Password (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The Windows domain password for the user. |
Exchange2010Service_Service DisplayName (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The display name of the Exchange 2010 external service that corresponds with the Exchange 2010 server that contains the Exchange 2010 mailbox for this user. To add an Exchange 2010 external service for a user, include values for both the Exchange2010Service_ServiceDisplayName and Exchange2010Service_EmailAddress fields in the CSV input file. To remove the Exchange 2010 service for a user, set at least one of either the Exchange2010Service_ServiceDisplayName and Exchange2010Service_EmailAddress fields to %null% in the CSV input file |
Exchange2010Service_Email Address (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The primary email address that is associated with the Exchange mailbox that you want this user to be able to access. To add an Exchange 2010 external service for a user, include values for both the Exchange2010Service_ServiceDisplayName and Exchange2010Service_EmailAddress fields in the CSV input file |
Exchange2010Service_UserId (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The Windows domain alias for the user in Exchange 2010 (useful when the setting is different from the user alias). |
Exchange2010Service_User Password (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The Windows domain password for the user. |
EmailAction (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Action to take for a voice message:
- 0—Reject the message
- 1—Accept the message
- 2—Relay the message
- 3—Accept the message and relay a copy
|
VoiceMailAction (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Action to take for a voice message:
- 0—Reject the message
- 1—Accept the message
- 2—Relay the message
- 3—Accept the message and relay a copy
|
FaxAction (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Action to take for a voice message:
- 0—Reject the message
- 1—Accept the message
- 2—Relay the message
- 3—Accept the message and relay a copy
|
DeliveryReceiptAction (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Action to take for a voice message:
- 0—Reject the message
- 1—Accept the message
- 2—Relay the message
- 3—Accept the message and relay a copy
|
RelayAddress (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Specifies the address to relay incoming message when one or more of the actions (EmailAction, VoicemailAction, FaxAction, DeliveryReceiptAction) is set to 2 (Relay the message). RelayAddress is in the format of someone@somewhere or someone@somewhere.com. |
SmtpProxyAddresses (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The full SMTP proxy addresses for users. To create/update more than one address per user, separate them by commas and surround them all with double quotes. For example: “someone1@somewhere.com,someone2@somewhere.com” |
LdapCcmUserID |
Optional |
Optional |
N/A |
The value of the LDAP field that you mapped to the Unity Connection Alias field when you configured Cisco Unity Connection to integrate with an LDAP directory. See the Task List for Configuring LDAP section. This field is used when you create Unity Connection users by importing LDAP user data and when you integrate existing Unity Connection users with LDAP users. |
CorporatePhoneNumber (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The phone number of the user. Note that the field is only for directory information purposes. Cisco Unity Connection does not use the phone number to route calls. |
DisplayName_HTML (Users With Mailbox Only) |
Optional |
Optional |
N/A |
A descriptive name for the notification device. This field is required if you want to create an HTML notification device. |
Active_HTML (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Enables the HTML notification device. |
callback_HTML (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The phone number that the user use to play and record voice message. |
disableMobPCA_HTML (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Disallow the users to change the mobile number from Cisco PCA and Mini Web inbox. |
disableTemplatePCA_HTML (Users With Mailbox Only) |
Optional |
Optional |
N/A |
Disallow the users to change the notification template from PCA. |
SmtpAddress_HTML (Users With Mailbox Only) |
Optional |
Optional |
N/A |
The email address of the user text-compatible mobile phone, or another email account (such as a home email address). Up to 128 characters can be entered in this field. SmtpAddress_HTML column is mandatory if Active_HTML column is set to 1. |
templateName_HTML (Users With Mailbox Only) |
Optional |
Optional |
N/A |
A default or a customized template name. |