The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
B
bootflash file, copying the running configuration for an individual VDC 4-21
C
Cisco Nexus 7000 Series 32-port Gbps Ethernet modules
port group interface allocation 1-6, 3-4
configuration files
VDC support 1-8
configuration modes
description 1-9
control plane policing. See CoPP
CoPP
VDC support 1-12
D
default user roles
network-admin 1-8
network-operator 1-9
vdc-admin 1-9
vdc-operator 1-9
default VDC
description 1-4
documentation
additional publications 3-viii
related 2-7
updates 3-x
F
fault isolation
description (figure) 1-11
FCoE
VDC support 1-12
feature support
description 1-12
field description
VDC resource templates 2-6
field descriptions
VDC management 4-23
H
HA
VDC support 1-12
HA policies
changing for VDCs 4-19
description 3-3
I
infrastructure layer
description 1-3
interfaces
allocating 3-4
allocating to VDCs 4-7
allocation 4-2
IP tunnels
VDC support 1-12
K
kernel
description 1-3
L
licensing
VDC resource templates 2-2
logical resources
description 1-7
namespaces 1-7
M
MAC addresses
per VDC 4-4
management connections
description 1-10
N
namespaces
description 1-7
network-operator roles
description 1-9
P
physical resource
description 1-5
port groups
allocation requirements 1-6, 3-4
R
rate limits
VDC support 1-12
Really Simple Syndication. See RSS
related documentation
creating VDCs 3-15
resource templates
description 1-7
resource templates. See VDC resource templates
running configuration
copying to a bootflash file 4-21
copying to startup configuration 4-21
S
setup wizard
storage VDCs
port groups 1-5
VLAN numbering 1-2
superuser roles. See network-admin roles
T
troubleshooting
storage VDCs 1-2
U
user roles
description 1-8
V
vdc-admin roles
description 1-9
VDC configuration
saving to bootflash file 4-4, 4-21
saving to startup configuration 4-4, 4-21
VDC management
description 4-1
field descriptions 4-23
HA policies 4-4
interface allocation 4-2
resource limits 4-4
vdc-operator roles
description 1-9
VDC resources
changing limits 4-19
description 1-5
limits (table) 3-2
VDC resource templates
adding 2-3
adding limits 2-3
changing limits 2-4
default limits 2-2
deleting 2-5
deleting limits 2-5
field descriptions 2-6
resources 2-1
VDCs
allocating interfaces 4-7
architecture 1-3
changing HA policies 4-19
changing resource limits 4-19
communication between 1-4
configuration files 1-8
creating with setup wizard 3-1
default user roles 1-8
deleting 4-22
description 1-1
discovering 4-22
fault isolation (figure) 1-11
FCoE 1-5
feature support 1-12
infrastructure layer 1-3
initializing 3-5
kernel 1-3
management connections 1-10
managing 4-7
namespaces 1-7
resource templates 1-7
resuming 3-14
shared interfaces 1-5
storage 1-5
suspending 3-14
VLAN numbering
VDCs 1-2