Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
Preface
Downloads: This chapterpdf (PDF - 107.0KB) The complete bookPDF (PDF - 4.22MB) | Feedback

Preface

Table Of Contents

Preface

Audience

Organization

Document Conventions

Related Documentation

Obtaining Documentation and Submitting a Service Request


Preface


This document describes the configuration details for Cisco NX-OS unicast routing.

Audience

To use this guide, you must be familiar with IP and routing technology.

Organization

This document is organized into the following chapters:

Title
Description

Chapter 1, "Overview"

Presents an overview of unicast routing and brief descriptions of each feature.

Chapter 2, "Configuring IPv4"

Describes how to configure and manage IPv4, including ARP and ICMP.

Chapter 3, "Configuring IPv6"

Describes how to configure and manage IPv6, including Neighbor Discovery Protocol and ICMPv6.

Chapter 4, "Configuring DNS"

Describes how to configure DHCP and DNS clients.

Chapter 5, "Configuring WCCPv2"

Describes how to configure WCCPv2.

Chapter 6, "Configuring OSPFv2"

Describes how to configure the OSPFv2 routing protocol for IPv4 networks.

Chapter 7, "Configuring OSPFv3"

Describes how to configure the OSPFv3 routing protocol for IPv6 networks.

Chapter 8, "Configuring EIGRP"

Describes how to configure the Cisco EIGRP routing protocol for IPv4 networks.

Chapter 9, "Configuring IS-IS"

Describes how to configure the IS-IS routing protocol for IPv4 and IPv6 networks.

Chapter 10, "Configuring Basic BGP"

Describes how to configure basic features for the BGP routing protocol for IPv4 and IPv6 networks.

Chapter 11, "Configuring Advanced BGP"

Describes how to configure advanced features for the BGP routing protocol for IPv4 and IPv6 networks, including route redistribution and route aggregation.

Chapter 12, "Configuring RIP"

Describes how to configure the RIP routing protocol for IPv4 networks.

Chapter 13, "Configuring Static Routing"

Describes how to configure static routing for IPv4 and IPv6 networks.

Chapter 14, "Configuring Layer 3 Virtualization"

Describes how to configure layer 3 virtualization.

Chapter 15, "Managing the Unicast RIB and FIB"

Describes how to view and modify the unicast RIB and FIB.

Chapter 16, "Configuring Route Policy Manager"

Describes how to configure the Route Policy Manager, including IP prefix lists and route-maps for filtering and redistribution.

Chapter 17, "Configuring Policy-Based Routing"

Describes how to configure route maps for policy based routing.

Chapter 18, "Configuring GLBP"

Describes how to configure GLBP.

Chapter 19, "Configuring HSRP"

Describes how to configure the Hot Standby Routing Protocol.

Chapter 20, "Configuring VRRP"

Describes how to configure the Virtual Router Redundancy Protocol.

Chapter 21, "Configuring Object Tracking"

Describes how to configure object tracking.

Appendix A, "IETF RFCs supported by Cisco NX-OS Unicast Features, Release 4.x"

Lists IETF RFCs supported by Cisco NX-OS.

Appendix 2, "Configuration Limits for Cisco NX-OS Layer 3 Unicast Features, Release 4.x"

Lists configuration limits for Cisco Nexus 7000 series.


Document Conventions

Command descriptions use these conventions:

Convention
Description

boldface font

Commands and keywords are in boldface.

italic font

Arguments for which you supply values are in italics.

[ ]

Elements in square brackets are optional.

[ x | y | z ]

Optional alternative keywords are grouped in brackets and separated by vertical bars.

string

A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.


Screen examples use these conventions:

screen font

Terminal sessions and information that the switch displays are in screen font.

boldface screen font

Information that you must enter is in boldface screen font.

italic screen font

Arguments for which you supply values are in italic screen font.

< >

Nonprinting characters, such as passwords, are in angle brackets.

[ ]

Default responses to system prompts are in square brackets.

!, #

An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line.


This document uses the following conventions:


Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual.



Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Related Documentation

Cisco NX-OS includes the following documents:

Release Notes

Cisco Nexus 7000 Series NX-OS Release Notes, Release 4.2

NX-OS Configuration Guides

Cisco Nexus 7000 Series NX-OS Getting Started with Virtual Device Contexts

Cisco Nexus 7000 Series NX-OS Fundamentals Configuration Guide, Release 4.x

Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 4.x

Cisco Nexus 7000 Series NX-OS Layer 2 Switching Configuration Guide, Release 4.x

Cisco Nexus 7000 Series NX-OS Quality of Service Configuration Guide, Release 4.x

Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x

Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide, Release 4.x

Cisco Nexus 7000 Series NX-OS Security Configuration Guide, Release 4.x

Cisco Nexus 7000 Series NX-OS Virtual Device Context Configuration Guide, Release 4.x

Cisco Nexus 7000 Series NX-OS Software Upgrade and Downgrade Guide, Release 4.2

Cisco NX-OS Licensing Guide

Cisco Nexus 7000 Series NX-OS High Availability and Redundancy Guide

Cisco Nexus 7000 Series NX-OS System Management Configuration Guide, Release 4.x

Cisco Nexus 7000 Series NX-OS XML Management Interface User Guide

Cisco NX-OS System Messages Reference

Cisco Nexus 7000 Series NX-OS MIB Quick Reference

NX-OS Command References

Cisco Nexus 7000 Series NX-OS Command Reference Master Index

Cisco Nexus 7000 Series NX-OS Fundamentals Command Reference

Cisco Nexus 7000 Series NX-OS Interfaces Command Reference

Cisco Nexus 7000 Series NX-OS Layer 2 Switching Command Reference

Cisco Nexus 7000 Series NX-OS Quality of Service Command Reference

Cisco Nexus 7000 Series NX-OS Unicast Routing Command Reference

Cisco Nexus 7000 Series NX-OS Multicast Routing Command Reference

Cisco Nexus 7000 Series NX-OS Security Command Reference

Cisco Nexus 7000 Series NX-OS Virtual Device Context Command Reference

Cisco Nexus 7000 Series NX-OS System Management Command Reference

Other Software Document

Cisco Nexus 7000 Series NX-OS Troubleshooting Guide

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.