The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes the Cisco NX-OS Multiprotocol Label Switching commands that begin with K.
To configure an authentication key on a keychain, use the key command. To return to the default setting, use the no form of this command.
Keychain key configuration mode
|
|
---|---|
This example shows how to configure an authentication key on a keychain:
|
|
---|---|
Configures the Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP). |
To configure a group of authentication keys, use the key chain command. To return to the default setting, use the no form of this command.
Key chain name. The maximum size is alphanumeric 32 characters. |
|
|
---|---|
This example shows how to configure a group of authentication keys:
|
|
---|---|
Configures the Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP). |
To configure an authentication string for a key, use the key-string command. To return to the default setting, use the no form of this command.
Authentication string for a key. The key can be from 1 to 80 uppercase or lowercase alphanumeric characters. The first character cannot be a numeral. |
Keychain key configuration mode
|
|
---|---|
This example shows how to configure an authentication string for a key:
|
|
---|---|
Configures the Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP). |