The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes the Cisco NX-OS Multiprotocol Label Switching commands that begin with G.
To configure the graceful restart timer, use the graceful-restart command. To return to the default setting, use the no form of this command.
graceful-restart [timers {forwarding-holding seconds | max-recovery seconds | neighbor-liveness seconds}]
no graceful-restart [timers {forwarding-holding seconds | max-recovery seconds | neighbor-liveness seconds}]
|
|
---|---|
You must configure the MPLS VPN and VRFs before creating VRF-aware static labels.
This example shows how to configure the graceful restart timer:
|
|
---|---|
Configures the Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP). |