Cisco Nexus 6000 Series NX-OS FabricPath Command Reference
D Commands
Downloads: This chapterpdf (PDF - 74.0KB) The complete bookPDF (PDF - 806.0KB) | Feedback

D Commands

Table Of Contents

D Commands

description (FabricPath)


D Commands


This chapter describes the Cisco NX-OS FabricPath commands that begin with D.

description (FabricPath)

To configure the topology description, use the description command.

description desc

no description desc

Syntax Description

desc

Line description. The maximum size is 80 bytes.


Command Default

None

Command Modes

Global configuration mode

Command History

Release
Modification

6.0(2)N1(1)

This command was introduced.


Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to configure the topology description:

switch# configure terminal
switch#(config)# fabricpath topology 50
switch#(config-fp-topology)# description FabricPath Topology 50 Configuration
 
   

Related Commands

Command
Description

fabricpath domain default

Enables FabricPath Layer 2 IS-IS.