Cisco Nexus 1010 Software Configuration Guide, Release 4.2(1)SP1(4)
New and Changed Information
Downloads: This chapterpdf (PDF - 78.0KB) The complete bookPDF (PDF - 3.61MB) | Feedback

New and Changed Information

Table Of Contents

New and Changed Information


New and Changed Information


This section lists the new and changed information in this document by release, and where it is located.

Feature
Description
Changed in Release
Where Documented

Flexible Network Uplink

Configuring flexible network uplink type.

4.2(1)SP1(4)

Chapter 3 "Configuring the Network Uplinks"

Native VLAN

Assigns native VLAN to a port channel.

4.2(1)SP1(4)

Chapter 3 "Configuring the Network Uplinks"

Shutting down port channel interfaces

Shuts down ports or port channel interfaces.

4.2(1)SP1(4)

Chapter 3 "Configuring the Network Uplinks"

OVA support for VSB

Create a VSB using an OVA file.

4.2(1)SP1(4)

Chapter 4 "Configuring Virtual Service Blades"

Migrating OVA

Export an OVA from ESX and import it into Cisco Nexus 1010 product family as a VSB.

4.2(1)SP1(4)

Migrating OVA to Cisco Nexus 1010 Product Family

Migrating a VSB

Migrates a VSB from Cisco Nexus 1010 to Cisco Nexus 1010-X

4.2(1)SP1(3)

Chapter 7 "Migrating a VSB to Cisco Nexus 1010-X"

Backing up and restoring a VSB

Create a backup copy of a VSB, store it remotely, and re-import it to restore a VSB.

4.2(1)SP1(3)

Chapter 6 "VSB Backup and Recovery"

CDP

New command show network cdp neighbors

4.2(1)SP1(3)

Chapter 4 "Configuring Virtual Service Blades"

Configuration Limits

Up to 6 VSMs and 3 VSGs can be configured.

4.2(1)SP1(3)

"Cisco Nexus 1010 Configuration Limits"

Escape sequence

Escape sequence changed from `$' to `^\' (CTRL + \).

4.2(1)SP1(2)

Chapter 4 "Configuring Virtual Service Blades"