Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Configuring Cisco Right-To-Use License
Downloads: This chapterpdf (PDF - 273.0KB) The complete bookPDF (PDF - 7.67MB) | Feedback

Table of Contents

Configuring a Cisco Right-To-Use License

Finding Feature Information

Contents

Prerequisites for Cisco RTU License

Restrictions for Cisco RTU License

Information About Cisco RTU License

Overview of the Cisco Licensing Mechanism

RTU Supported Software Licenses

Evaluation Licenses and RTU Licenses

How to Activate an Evaluation License

Configuration Examples for RTU Supported Software Licenses

Configuring Throughput

Example: Accepting the Global EULA

Example: Accepting an EULA for Software Redundancy License

Example: Accepting an EULA for the Inter-Chassis Redundancy License

Example: Accepting an EULA for the Lawful Intercept License

Example: Sample Output for show Commands

Sample Output for the show license EULA Command

Sample Output for the show license all Command

Additional References

Related Documents

MIBs

Technical Assistance

Feature Information for Cisco RTU License

Configuring a Cisco Right-To-Use License

First Published: July 2012

This guide provides an overview and guidance for configuring the Cisco® ASR 1000 Series Aggregation Services Routers with Right-To-Use License (RTU).

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the “Feature Information for Cisco RTU License” section.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn . An account on Cisco.com is not required.

Prerequisites for Cisco RTU License

  • You must obtain the device certificate from the Cisco licensing infrastructure before you start the installation process.
  • You must have a Cisco user login account.

Restrictions for Cisco RTU License

On the Cisco ASR 1001 Router, if you downgrade from the Cisco IOS XE.3.6.0S image to an earlier release, all the licenses installed in IOS XE 3.6.0s become invalid, and you cannot use the associated features.

If you upgrade from an earlier Cisco IOS XE release to Cisco IOS XE 3.6.0S and or a later release, all the licenses are converted automatically. If you downgrade and then upgrade back to Cisco IOS XE 3.6.0S or a later release, the licenses are not converted. The Licenses installed in the downgrade versions are not visible.

Information About Cisco RTU License

Overview of the Cisco Licensing Mechanism

The Cisco licensing mechanism provides flexibility to run a device at different technology package levels. This mechanism is referred to as technology package licensing and leverages the universal technology package based licensing solution. A universal image containing all levels of a software package is loaded on to the device. During startup, the device determines the highest level of license and loads the corresponding software features or subsystems.

The Cisco ASR 1001 Router and ASR 1002-X Router support technology package-based licenses that are not node locked. Technology packages and feature licenses are activated using evaluation licenses that are built in. Evaluation licenses are limited period-metered licenses that are valid for 60 days. When the time allowed for an evaluation license expires, the license is automatically upgraded to RTU license. After all the RTU licenses are activated, there is no expiration of license and are valid for a lifetime.

To enable an evaluation licence, you have to accept the global end user license agreement (EULA).

For more information on Cisco IOS XE software activation conceptual overview, see the Software Activation Configuration Guide, Cisco IOS XE Release 3S at this URL:

http://www.cisco.com/en/US/docs/ios-xml/ios/csa/configuration/xe-3s/csa-xe-3s-book.html

RTU Supported Software Licenses

This section describes the various RTU-supported software licenses.


NotePermanent licenses are not affected by Cisco IOS XE release upgrades. Permanent licenses are not affected by Cisco IOS XE release upgrades.


An evaluation license is required to activate the licensed features. When a router enters the configuration mode, a check is performed to verify the license. Feature configurations are allowed only valid licenses are available. If a permanent license does not exist, Cisco IOS activates an RTU license when you accept the EULA agreement and the corresponding Cisco IOS functionalities will be available.

The RTU license supports the following software features:

  • Inter chassis redundancy
  • Lawful intercept
  • Software redundancy
  • IPsec
  • Throughput

Accept the EULA to activate the corresponding feature. Migration of a permanent license from previous versions of the software images are seamless. For information on accepting the EULA, see Example: Accepting the Global EULA.

Evaluation Licenses and RTU Licenses

Table 10-1 lists the Evaluation licenses and RTU licenses available on the Cisco ASR 1000 Series Routers.

Table 10-1 Evaluation and RTU Licenses

License Name
License Description
Evaluation License
RTU

FLS-ASR1001-5G

Upgrade from 2.5G to 5G license for Cisco ASR1001 Router

Yes

No

FLSASR1-IOSRED

Software redundancy license for Cisco ASR1000 Series Aggregation Services Routers

Yes

Yes

FLSASR1-IPSEC

IPSEC License for Cisco ASR1000 Series Aggregation Services Routers

Yes

Yes

FLSASR1-FW

FW License for Cisco ASR1000 Series Aggregation Services Routers

Yes

Yes

FLSASR1-FPI

Flex. Pack. Insp License for Cisco ASR1000 Series Aggregation Services Routers

Yes

Yes

FLSASR1-FWNAT-R

Firewall and NAT Stateful Inter-Chassis Redundancy License

Yes

Yes

FLSASR1-LI

Lawful Intercept License for Cisco ASR1000 Series Aggregation Services Routers

Yes

Yes

FLSASR1-BB

Broadband License for Cisco ASR1000 Series Aggregation Services Routers

Yes

Yes

FLSASR1-BB-4K

Broadband 4K Sessions for Cisco ASR1000 Series Aggregation Services Routers

Yes

Yes

FLSASR1-BB-16K

Broadband 16K Sessions for Cisco ASR1000 Series Aggregation Services Routers

Yes

Yes

FLSASR1-BB-32K

Broadband 32K Sessions for Cisco ASR1000 Series Aggregation Services Routers

Yes

Yes

FLSASR1-CS-250P

CUBE(SP) 250 Session License for Cisco ASR1000 Series Aggregation Services Routers

Yes

Yes

FLSASR1-CS-2KP

CUBE(SP) 2K Session License for Cisco ASR1000 Series Aggregation Services Routers

Yes

Yes

FLSASR1-CS-4KP

CUBE(SP) 4K Session License for Cisco ASR1000 Series Aggregation Services Routers

Yes

Yes

FLSASR1-CS-16KP

CUBE(SP) 16K Session License for Cisco ASR1000 Series Aggregation Services Routers

Yes

Yes

FLSASR1-CS-32KP

CUBE(SP) 32K Session License for Cisco ASR1000 Series Aggregation Services Routers

Yes

Yes

FLSASR1-CS-LAB

CUBE(SP) Lab Use Only Lic for Cisco ASR1000 Series Aggregation Services Routers

Yes

Yes

FLSASR1-CS-TPEX

CUBE(SP) License for ASR1000 in Video/B2BTP Ex

Yes

Yes

SLASR1-AIS

Cisco ASR 1000 Advanced IP Services License

Yes

Yes

SLASR1-AES

Cisco ASR 1000 Advanced Enterprise Services License

Yes

Yes

SLASR1-IPB

Cisco ASR 1000 IP BASE License

 

 

FLS-ASR1001-5G

Throughput performance upgrade from 2.5G to 5G license for ASR1001

Yes

Yes

How to Activate an Evaluation License

To activate an evaluation license for a technology package perform the steps detailed in this section. For more information on activating the feature licenses, see “Configuration Examples for RTU Supported Software Licenses” section.


NoteEvaluation RTU licenses automatically changes to RTU licenses after an evaluation period of 60 days. Evaluation RTU licenses automatically changes to RTU licenses after an evaluation period of 60 days.


Evaluation licenses can be activated using the license boot level { adventerprise | advipservices |ipbase } command.

SUMMARY STEPS

1. enable

2. configure terminal

3. license boot level { adventerprise | advipservices |ipbase }

4. exit

5. copy running-config startup-config

6. reload

DETAILED STEPS

 

Command or Action
Purpose

Step 1

enable

 

Router> enable

Enables the privileged EXEC mode.

  • Enter your password if prompted.

Step 2

configure terminal

 

Router#configure terminal

Enters the global configuration mode.

Step 3

license boot level { adventerprise | advipservices |ipbase }

 

license boot level { adventerprise | advipservices |ipbase }

 

Router(config)#license boot level adventerprise

Enables the evaluation license.

Note Use the ? command with the technology-package command to see the software packages and features supported on your router.

Step 4

exit

 

Router(config)#exit

Exits the global configuration mode.

Step 5

copy running-config startup-config

 
Router#copy running-config startup-config

Saves the configuration.

Step 6

reload

 

Router#reload

Reloads the router. A reload is required to activate the software package.

Example

The following example shows how to activate an evaluation license:

Router>enable
Router#configure terminal
Router(config)#license boot level adventerprise
% use 'write' command to make license boot config take effect on next boot
Router(config)#exit
Router#copy running-config startup-config
Router#reload

Configuration Examples for RTU Supported Software Licenses

This section provides the following configuration examples:

Configuring Throughput

You can upgrade the throughput of the ESP from 2.5 Gbps to 5 Gbps by activating the RTU license.

For information on configuring throughput on the Cisco ASR 1001 Router, see Cisco ASR 1001 Router Quick Start Guide .

For information on configuring throughput on the Cisco ASR 1002-X Router, see Cisco ASR 1001 Router Quick Start Guide .

Example: Accepting the Global EULA

When activating the evaluation license, accept the global EULA. Once accepted, the global EULA will be valid for all the future license activations including the RTU.

Perform the following actions when required:

Router(config)#license accept end user agreement
PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN.
 
Use of this product feature requires an additional license from Cisco, together with an additional payment. You may use this product feature on an evaluation basis, without payment to Cisco, for 60 days. Your use of the product, including during the 60 day evaluation period, is subject to the Cisco end user license agreement http://www.cisco.com/en/US/docs/general/warranty/English/EU1KEN_.html If you use the product feature beyond the 60 day evaluation period, you must submit the appropriate payment to Cisco for the license. After the 60 day evaluation period, your use of the product feature will be governed solely by the Cisco end user license agreement (link above), together with any supplements relating to such product feature. The above applies even if the evaluation license is not automatically terminated and you do not receive any notice of the expiration of the evaluation period. It is your responsibility to determine when the evaluation period is complete and you are required to make payment to Cisco for your use of the product feature beyond the evaluation period.
 
Your acceptance of this agreement for the software features on one product shall be deemed your acceptance with respect to all such software on all Cisco products you purchase which includes the same software. (The foregoing notwithstanding, you must purchase a license for each software feature you use past the 60 days evaluation period, so that if you enable a software feature on 1000 devices, you must purchase 1000 licenses for use past the 60 day evaluation period.)
 
Activation of the software command line interface will be evidence of your acceptance of this agreement.
 
 
ACCEPT? (yes/[no]): Yes
Router(config)#
*Jul 6 09:36:11.293: %LICENSE-6-EULA_ACCEPT_ALL: The Right to Use End User License Agreement is accepted
 

Example: Accepting an EULA for Software Redundancy License

The following example shows the acceptance of an EULA for the software redundancy feature:

Router(config)#redundancy
Router(config-red)#mode
Router(config-red)#mode sso
 
PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN.
 
Use of this product feature requires an additional license from Cisco, together with an additional payment. You may use this product feature on an evaluation basis, without payment to Cisco, for 60 days. Your use of the product, including during the 60 day evaluation period, is subject to the Cisco end user license agreement http://www.cisco.com/en/US/docs/general/warranty/English/EU1KEN_.html If you use the product feature beyond the 60 day evaluation period, you must submit the appropriate payment to Cisco for the license. After the 60 day evaluation period, your use of the product feature will be governed solely by the Cisco end user license agreement (link above), together with any supplements relating to such product feature. The above applies even if the evaluation license is not automatically terminated and you do not receive any notice of the expiration of the evaluation period. It is your responsibility to determine when the evaluation period is complete and you are required to make payment to Cisco for your use of the product feature beyond the evaluation period.
 
Your acceptance of this agreement for the software features on one product shall be deemed your acceptance with respect to all such software on all Cisco products you purchase which includes the same software. (The foregoing notwithstanding, you must purchase a license for each software feature you use past the 60 days evaluation period, so that if you enable a software feature on 1000 devices, you must purchase 1000 licenses for use past the 60 day evaluation period.)
 
Activation of the software command line interface will be evidence of your acceptance of this agreement.
 
ACCEPT? (yes/[no]): yes
 
Router(config)#
 

Example: Accepting an EULA for the Inter-Chassis Redundancy License

The following example shows the acceptance of an EULA for the application redundancy feature:

Router(config-red)#application redundancy
 
PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN.
 
Use of this product feature requires an additional license from Cisco, together with an additional payment. You may use this product feature on an evaluation basis, without payment to Cisco, for 60 days. Your use of the product, including during the 60 day evaluation period, is subject to the Cisco end user license agreement http://www.cisco.com/en/US/docs/general/warranty/English/EU1KEN_.html If you use the product feature beyond the 60 day evaluation period, you must submit the appropriate payment to Cisco for the license. After the 60 day evaluation period, your use of the product feature will be governed solely by the Cisco end user license agreement (link above), together with any supplements relating to such product feature. The above applies even if the evaluation license is not automatically terminated and you do not receive any notice of the expiration of the evaluation period. It is your responsibility to determine when the evaluation period is complete and you are required to make payment to Cisco for your use of the product feature beyond the evaluation period.
 
Your acceptance of this agreement for the software features on one product shall be deemed your acceptance with respect to all such software on all Cisco products you purchase which includes the same software. (The foregoing notwithstanding, you must purchase a license for each software feature you use past the 60 days evaluation period, so that if you enable a software feature on 1000 devices, you must purchase 1000 licenses for use past the 60 day evaluation period.)
 
Activation of the software command line interface will be evidence of your acceptance of this agreement.
ACCEPT? (yes/[no]): yes
 

Example: Accepting an EULA for the Lawful Intercept License

The following MIBs are required to activate lawful intercept license:

  • snmp-server view INTERCEPT_VIEW ciscoIpTapMIB
  • snmp-server view INTERCEPT_VIEW cisco802TapMIB
  • snmp-server view INTERCEPT_VIEW ciscoTap2MIB

The following example shows the acceptance of an EULA for the lawful intercept feature:

Router(config-red)#snmp-server view INTERCEPT_VIEW ciscoIpTapMIB included
 
PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN.
 
Use of this product feature requires an additional license from Cisco, together with an additional payment. You may use this product feature on an evaluation basis, without payment to Cisco, for 60 days. Your use of the product, including during the 60 day evaluation period, is subject to the Cisco end user license agreement http://www.cisco.com/en/US/docs/general/warranty/English/EU1KEN_.html If you use the product feature beyond the 60 day evaluation period, you must submit the appropriate payment to Cisco for the license. After the 60 day evaluation period, your use of the product feature will be governed solely by the Cisco end user license agreement (link above), together with any supplements relating to such product feature. The above applies even if the evaluation license is not automatically terminated and you do not receive any notice of the expiration of the evaluation period. It is your responsibility to determine when the evaluation period is complete and you are required to make payment to Cisco for your use of the product feature beyond the evaluation period.
 
Your acceptance of this agreement for the software features on one product shall be deemed your acceptance with respect to all such software on all Cisco products you purchase which includes the same software. (The foregoing notwithstanding, you must purchase a license for each software feature you use past the 60 days evaluation period, so that if you enable a software feature on 1000 devices, you must purchase 1000 licenses for use past the 60 day evaluation period.)
 
Activation of the software command line interface will be evidence of your acceptance of this agreement.
ACCEPT? (yes/[no]): yes

Example: Sample Output for show Commands

In the following examples, the output for the show commands:

Sample Output for the show license EULA Command

Router#show license EULA
Feature name EULA Accepted
------------ -------------
adventerprise yes
advipservices no
ipbase n/a
avc n/a
broadband n/a
broadband_4k n/a
cube_250 n/a
cube_250_red n/a
cube_ent_100 n/a
cube_ent_100_red n/a
cube_lab n/a
cube_video_b2btp n/a
cube_video_b2btp_red n/a
firewall n/a
fpi n/a
fwnat_red no
gtp_addon_aic n/a
internal_service n/a
ipsec no
lawful_intr no
lisp n/a
nat64_stateful_2m n/a
otv n/a
sgt_fw n/a
sw_redundancy yes
throughput_10g no
throughput_20g no
throughput_36g no
vpls n/a
 
PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR
LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH
PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING
TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND
BY ALL THE TERMS SET FORTH HEREIN.
 
Use of this product feature requires an additional license from Cisco,
together with an additional payment. You may use this product feature
on an evaluation basis, without payment to Cisco, for 60 days. Your use
of the product, including during the 60 day evaluation period, is
subject to the Cisco end user license agreement
http://www.cisco.com/en/US/docs/general/warranty/English/EU1KEN_.html
If you use the product feature beyond the 60 day evaluation period, you
must submit the appropriate payment to Cisco for the license. After the
60 day evaluation period, your use of the product feature will be
governed solely by the Cisco end user license agreement (link above),
together with any supplements relating to such product feature. The
above applies even if the evaluation license is not automatically
terminated and you do not receive any notice of the expiration of the
evaluation period. It is your responsibility to determine when the
evaluation period is complete and you are required to make payment to
Cisco for your use of the product feature beyond the evaluation period.
 
Your acceptance of this agreement for the software features on one
product shall be deemed your acceptance with respect to all such
software on all Cisco products you purchase which includes the same
software. (The foregoing notwithstanding, you must purchase a license
for each software feature you use past the 60 days evaluation period,
so that if you enable a software feature on 1000 devices, you must
purchase 1000 licenses for use past the 60 day evaluation period.)
 
Activation of the software command line interface will be evidence of
your acceptance of this agreement.
 

Sample Output for the show license all Command

Router#show license all
License Store: Primary License Storage
License Store: Built-In License Storage
StoreIndex: 0 Feature: adventerprise Version: 1.0
License Type: EvalRightToUse
License State: Active, In Use
Evaluation total period: 8 weeks 4 days
Evaluation period left: 6 weeks 2 days
Period used: 2 weeks 1 day
Transition date: Aug 24 2012 05:14:39
License Count: Non-Counted
License Priority: Low
StoreIndex: 1 Feature: advipservices Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 2 Feature: fwnat_red Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 3 Feature: ipsec Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 4 Feature: lawful_intr Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 5 Feature: sw_redundancy Version: 1.0
License Type: RightToUse
License State: Active, In Use
License Count: Non-Counted
License Priority: Low
StoreIndex: 6 Feature: throughput_10g Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 7 Feature: throughput_20g Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 8 Feature: throughput_36g Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
 

Additional References

Related Documents

Related Topic
Document Title

Cisco IOS commands

Cisco IOS Master Commands List, All Releases

Cisco IOS Software Activation Commands

Cisco IOS Software Activation Command Reference

MIBs

MIB
MIBs Link
  • snmp-server view INTERCEPT_VIEW ciscoIpTapMIB
  • snmp-server view INTERCEPT_VIEW cisco802TapMIB
  • snmp-server view INTERCEPT_VIEW ciscoTap2MIB

To locate and download MIBs for selected platforms, Cisco software releases, and feature sets, use Cisco MIB Locator found at the following URL:

http://www.cisco.com/go/mibs

Technical Assistance

Description
Link

The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.

http://www.cisco.com/cisco/web/support/index.html

Feature Information for Cisco RTU License

Table 10-2 lists the features in this module and provides links to specific configuration information.

Use Cisco Feature Navigator to find information about platform support and software image support. Cisco Feature Navigator enables you to determine which software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn . An account on Cisco.com is not required.


Note Table 10-2 lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.


 

Table 10-2 Feature Information for Cisco RTU License

Feature Name
Releases
Feature Information

Configuring Cisco RTU License

IOS XE 3.7

The Cisco ASR 1001 Router and ASR 1002-X Router support technology package-based licenses that are not node locked.

In Cisco IOS XE Release 3.7, this feature was introduced on the Cisco ASR 1000 Aggregation Services Routers.

The following sections provide information about this feature: