|
|
June 2010 |
Updated the input example and input parameters for the ENT-LNK command in the chapter ENT Commands. |
July 2010 |
- Updated the “RTRV-AUDIT-LOG” command in the chapter “RTRV Commands”.
- Updated the input parameter for the INIT-SYS command in the chapter INIT Commands.
|
August 2010 |
Updated the input parameter for the RTRV-NE-IMGSIGN and RTRV-NE-KEYINFO commands in the chapter “RTRV Commands”. |
September 2010 |
Updated the table “RFILE” in the chapter “Access Identifiers”. |
October 2010 |
- Updated the table “SHELF” in the chapter “Access Identifiers”.
- Updated the “Usage Guidelines” section for “RTRV-PMMODE-<VC_PATH>” and “SET-PMMODE-<VC_PATH>” commands.
|
February 2011 |
- Updated the content for “LINE” in the chapter “Access Identifiers”
- Updated the content for “LINELW” in the chapter “Access Identifiers”
|
April 2011 |
- Added the output parameter description for the “RTRV-NE-GEN” command in the chapter, RTRV Commands.
- Updated the input parameter description for the ED-<OCN_TYPE> command in the chapter, ED Commands.
|
May 2011 |
- Updated the output parameter description for the RTRV-<OCN_TYPE> command in the chapter, RTRV Commands.
- Updated the “CTC Port Numbers and TL1 Aids” table in the chapter, “Access Identifiers”.
|
July 2011 |
Updated the description for RFILE-DB in “RFILE” section in the chapter, “Access Identifiers” |
September 2011 |
- Added a note to RTRV-PM-<MOD2> section.
- Modified “Mode” description in ED-<OCN_TYPE> section.
|
October 2011 |
Updated “5Gbps InfiniBand payload” to “5Gbps InfiniBand (IB_5G) payload” in the chapter, “RTRV Commands”. |
February 2012 |
- Removed “MDLTFMT” parameter from the ED-OCH command in the chapter “ED Commands”.
- Removed “MDLTFMT” parameter from the RTRV-OCH command in the chapter “RTRV Commands”.
- Added “MS-ISC-100T” parameter to the ENT-EQPT command and removed “XCVXC-2.5G” parameter from the ENT-EQPT command in the chapter “ENT Commands”.
|
March 2012 |
Added Facility AID for CE1000 cards in the chapter “Access Identifiers”. |
August 2012 |
The full length book-PDF was generated. |
October 2012 |
Updated the input example for the ED-<MOD1FCPAYLOAD> command in the chapter, ED Commands. |
December 2012 |
Updated the ENT-RMONTH-<MOD2> command in the chapter, “ENT Commands” and RTRV-RMONTH-<MOD2> command in the chapter “RTRV Commands”. |
February 2013 |
- Updated the section, “ENT-LNKTERM” in the chapter “ENT Commands”.
- Added a new section “Important Notes about TL1 Commands” in the “Preface” chapter.
- Added “BIT-EC” counter in the output parameters table for “MONTYPE” parameter in the chapters “INIT Commands”, “RTRV Commands”, and “SET Commands”.
|
March 2013 |
Updated the input example for the OPR-SLV-WDMANS command in the chapter, OPR Commands. |
May 2013 |
Updated the input example for the RTRV-NE-IMGSIGN command in the chapter, RTRV Commands. |
June 2013 |
Updated the input example for the RTRV-NE-KEYINFO command in the chapter, RTRV Commands. |
July 2013 |
Updated the allowable range of POLD and PDIF parameters for the RTRV-DFLT-SECU command in the chapter, RTRV Commands. |
November 2013 |
- Updated the “Important Notes about TL1 Commands” section in the “Preface” chapter.
- Updated the “Usage Guidelines” section for “ED-PROTOCOL” command in the chapter, ED Commands.
- Updated the input parameter description for the ENT-EQPT command in the chapter, ENT Commands.
- Updated the “PRS” parameter description in the chapters, “ED Commands” and “RTRV Commands”.
- Updated the “SYNCMSG” and “SENDDUS” parameter descriptions in the chapters, “ED Commands” and “RTRV Commands”.
|
January 2014 |
Updated the “PST” and “SST” parameter descriptions for the “ED-<GIGE_TYPE>” command in the chapter, “ED Commands”. |
April 2014 |
The full length book-PDF was generated. |