This chapter provides disconnect (DISC) commands for the Cisco ONS 15310-MA, Cisco ONS 15454, Cisco ONS 15454 M2, and Cisco ONS 15454 M6.
NoteAll commands supported on the Cisco ONS 15454 platform are also supported on Cisco ONS 15454 M2 and Cisco ONS 15454 M6 platforms.
(Cisco ONS 15310-MA and Cisco ONS 15454) The Disconnect Test Access (DISC-TACC) command disconnects the test access point (TAP) and puts the connection back to its original state (no splits). For more information on test access (TACC), refer to the Cisco ONS SDH and Cisco ONS 15600 SDH TL1 Reference Guide .
For this command to be applicable, you must first create the TAP using the ED-<MOD_PATH> command.
NoteIf you send this command to an already disconnected TAP connection, an SADC error message is returned.
NoteIf the system cannot release TAP, an SRTN error message is returned.
Troubleshooting and Test Access
The test access point number. The TAP number must be an integer with a range of 1 to 999. String
Note This command only supports disconnecting one TAP at a time.