Table Of Contents
Cisco IOS Auto-Upgrade Manager
The Cisco IOS Auto-Upgrade Manager (AUM) feature simplifies the software image upgrade process by providing a simple interface to specify, download, and upgrade a new Cisco IOS image.
You can upgrade to a new Cisco IOS image in interactive mode by allowing the Auto-Upgrade Manager to guide you through the process. Alternatively, you can perform the upgrade by issuing a single Cisco IOS command or a series of commands. All three methods utilize the Warm Upgrade functionality to perform the upgrade and minimize downtime.
Configuration information is included in the "Configuring the Cisco IOS Auto-Upgrade Manager" module of the Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.4T, at the following URL:
The following sections provide information about this feature:
•Information About Cisco IOS Auto-Upgrade Manager
•How to Upgrade a Cisco IOS Software Image Using the Cisco IOS Auto-Upgrade Manager
•Configuration Examples for Cisco IOS Auto-Upgrade Manager
For a complete list of features included in the "Configuring the Cisco IOS Auto-Upgrade Manager" module, see the Feature Information Table located toward the end of the module.
Command Reference Information
The following commands are new or modified for this feature:
•autoupgrade ida url
•autoupgrade status email
•show autoupgrade configuration unknown
•upgrade automatic abortversion
•upgrade automatic getversion
•upgrade automatic runversion
Detailed information about these commands is included in the Cisco IOS Configuration Fundamentals Command Reference, Release 12.4T, at the following URL:
Master Commands Lists
Cisco IOS master commands lists provide an alphabetical list of all Cisco IOS commands in a Cisco IOS release.
Cisco IOS new, modified, removed, and replaced commands lists provide an alphabetized list of all new, modified, removed, and replaced commands in a Cisco IOS release.
Cisco IOS Master Commands List, Release 12.4T, at the following URL:
Cisco IOS New, Modified, Removed, and Replaced Commands List, Release 12.4T, at the following URL:
CCVP, the Cisco logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, LightStream, Linksys, MeetingPlace, MGX, Networking Academy, Network Registrar, Packet, PIX, ProConnect, ScriptShare, SMARTnet, StackWise, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0705R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2007 Cisco Systems, Inc. All rights reserved.