The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This preface describes who should read the Cisco Service Control Value Added Services Solution Guide, how it is organized, and its document conventions.
This guide is for experienced network administrators who are responsible for configuring and maintaining the Cisco Service Control solution.
The Document Revision History below records changes to this document.
This guide contains the following sections:
|
|
|
---|---|---|
1 |
Overview |
|
2 |
Configuring the SCE Platform to Support VAS Traffic Forwarding, page 2-1 |
Describes how to configure the SCE platform to support value added services (VAS). From the SCE platform you can do the following: •enable VAS support •configure global VAS parameters •configure VAS servers •configure VAS server groups |
3 |
Configuring the SCA BB Application to Support VAS Traffic Forwarding, page 3-1 |
Describes how to configure packages for VAS support. From the SCA BB console you can do the following: •enable VAS support •assign meaningful names to VAS server groups •assign specific traffic flows to specific VAS server groups |
4 |
Describes how to monitor VAS support |
|
5 |
Provides a complete VAS configuration example |
Your SCE platform and the software running on it contain extensive features and functionality, which are documented in the following resources:
•For further information regarding the Service Control CLI and a complete listing of all CLI commands, refer to the relevant guide:
–Cisco SCE8000 CLI Command Reference
–Cisco SCE2000 and SCE1000 CLI Command Reference
•For further information regarding configuring the SCE platform, refer to the relevant guide:
–Cisco SCE8000 10GBE Software Configuration Guide
–Cisco SCE8000 GBE Software Configuration Guide
–Cisco SCE2000 and SCE1000 Software Configuration Guide
•For further information regarding configuring the SCA BB application, refer to the Cisco Service Control Application for Broadband User Guide
•To view Cisco documentation or obtain general information about the documentation, refer to the following sources:
–Obtaining Documentation and Submitting a Service Request
–The Cisco Information Packet that shipped with your SCE platform.
This document uses the following conventions:
Note Means reader take note.
Tip Means the following information will help you solve a problem.
Timesaver Means the described action saves time. You can save time by performing the action described in the paragraph.
Warning Means reader be warned. In this situation, you might perform an action that could result in bodily injury.
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.