Configure ISE 2.1 with MS SQL using ODBC

Introduction

This document describes how to configure Identity Services Engine (ISE) with Microsoft Standard Query Language (SQL) Server for ISE authentication using Open Database Connectivity (ODBC)

Note: Open Database Connectivity (ODBC) authentication requires ISE to be able to fetch a plain text user password. The password can be encrypted in the database, but has to be decrypted by the stored procedure.

Prerequisites

Requirements

 Cisco recommends that you have knowledge of these topics:

• Database and ODBC concepts
• Microsoft SQL Server

Components Used

The information in this document is based on these software and hardware versions:

• Identity Services Engine 2.1
• MSSQL Server 2008 R2

Configure

Step 1. MS SQL Basic Configuration

Configuration steps include creating a database and one user for ISE with permissions to access that database.

Note: ISE supports only SQL authentication, not the Windows account. If you need to change authentication mode, please refer to Change Server Authentication Mode

1. Open SQL Server Management Studio (Start menu > Microsoft SQL Server 2008 R2) and create a database:

2. Leave default options or adjust database settings as shown in this image:

  

3. Create a user and set permissions as shown in the images below:

Step 2. ISE Basic Configuration

Create an ODBC Identity Source at Administration > External Identity Source > ODBC and test connection:

Step 3. Configure User Authentication

ISE authentication to ODBC uses stored procedures.The stored procedure for authentication returns resultset with this syntax:

Value	Type
Result	Integer
Group (for compatibility with ACS 4.2 only)	Integer or varchar(255)
Account Info	varchar(255)
Error String	varchar(255)

For other procedures, refer to Cisco Identity Services Engine 2.1 Administration Guide

Tip: It is possible to return named parameters instead of resultset. It is just a different type of output, functionality is the same.

1. Navigate to options and uncheck Prevent saving change that require table re-creation check box (optional):

2. Create the table. Make sure you set the identity settings on the primary key. To set user_id as primary key, right click the column name:

  

Final SQL:

  

CREATE TABLE [dbo].[ISE_Users](
 [user_id] [int] IDENTITY(1,1) NOT NULL,
 [username] [varchar](max) NOT NULL,
 [password] [varchar](max) NOT NULL,
 CONSTRAINT [PK_ISE_Users] PRIMARY KEY CLUSTERED 
(
 [user_id] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] 

3. Run this query to insert one user:

  

insert into ISE_Users(username,password) values('odbcuser1','odbcpass'); 

4. Create a procedure for plain text password authentication (used for PAP, EAP-GTC inner method, TACACS):

  

CREATE PROCEDURE [dbo].[ISEAuthUserPlainReturnsRecordset]
 @username varchar(255), @password varchar(255)
AS
BEGIN
 IF EXISTS( SELECT username
 FROM ISE_Users
 WHERE username = @username
 AND password = @password )
 SELECT 0,11,'This is a very good user, give him all access','No Error'
 FROM ISE_Users
 WHERE username = @username
 ELSE
 SELECT 3,0,'odbc','ODBC Authen Error'
END

  

5. Create a procedure for plain text password fetching (used for CHAP, MSCHAPv1/v2, EAP-MD5, LEAP, EAP-MSCHAPv2 inner method, TACACS):

  

CREATE PROCEDURE [dbo].[ISEFetchPasswordReturnsRecordset]
 @username varchar(255)
AS
BEGIN
 IF EXISTS( SELECT username
 FROM ISE_Users
 WHERE username = @username)
 SELECT 0,11,'This is a very good user, give him all access','No Error',password
 FROM ISE_Users
 WHERE username = @username
 ELSE
 SELECT 3,0,'odbc','ODBC Authen Error'
END

6. Create a procedure for check username or machine exists (used for MAB, fast reconnect of PEAP, EAP-FAST and EAP-TTLS):

CREATE PROCEDURE [dbo].[ISEUserLookupReturnsRecordset]
 @username varchar(255)
AS
BEGIN
 IF EXISTS( SELECT username
 FROM ISE_Users
 WHERE username = @username)
 SELECT 0,11,'This is a very good user, give him all access','No Error'
 FROM ISE_Users
 WHERE username = @username
 ELSE
 SELECT 3,0,'odbc','ODBC Authen Error'
END 

7. Test created procedures:

  

Test other procedures in the same way.

8. Configure procedures on ISE and save:

9. Create a simple authentication rule using ODBC and test it:

b3560#test aaa group ISE236 odbcuser1 odbcpass legacy 
Attempting authentication test to server-group ISE236 using radius
User was successfully authenticated.

Step 4. Configure Group Retrieval

1. Create tables containing user groups and another used for many-to-many mapping:

CREATE TABLE [dbo].[Groups](
 [Group_ID] [int] IDENTITY(1,1) NOT NULL,
 [Group_Name] [varchar](max) NOT NULL,
 [Group_Desc] [text] NOT NULL,
 CONSTRAINT [PK_Groups] PRIMARY KEY CLUSTERED 
(
 [Group_ID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMAR

  

CREATE TABLE [dbo].[User_Groups_Mapping](
 [user_id] [int] NOT NULL,
 [group_id] [int] NOT NULL
) ON [PRIMARY]

ALTER TABLE dbo.User_Groups_Mapping ADD CONSTRAINT
 FK_User_Groups_Mapping_Groups FOREIGN KEY
 (
 group_id
 ) REFERENCES dbo.Groups
 (
 Group_ID
 ) ON UPDATE CASCADE 
 ON DELETE CASCADE 
 
GO
ALTER TABLE dbo.User_Groups_Mapping ADD CONSTRAINT
 FK_User_Groups_Mapping_ISE_Users FOREIGN KEY
 (
 user_id
 ) REFERENCES dbo.ISE_Users
 (
 user_id
 ) ON UPDATE CASCADE 
 ON DELETE CASCADE 

2. Add groups and mappings, so that ODBCUSER1 belongs to both groups:

INSERT [dbo].[Groups] ([Group_ID], [Group_Name], [Group_Desc]) VALUES (1, N'ODBCGroup1', N'My Nice Group1')
INSERT [dbo].[User_Groups_Mapping] ([user_id], [group_id]) VALUES (1, 1)
INSERT [dbo].[Groups] ([Group_ID], [Group_Name], [Group_Desc]) VALUES (2, N'ODBCGroup2', N'My Nice Group2')
INSERT [dbo].[User_Groups_Mapping] ([user_id], [group_id]) VALUES (1, 2)

3. Create group retrieval procedure:

CREATE PROCEDURE [dbo].[ISEGroupsRetrieval]
 @username varchar(255), @result int output
AS
BEGIN
 if exists (select * from ISE_Users where username = @username)
 begin
 set @result = 0
 select Group_Name from Groups where group_id in (select group_ID from User_Groups_Mapping where User_Groups_Mapping.USER_ID IN (select USER_ID from ISE_Users where username=@username ) )
 end
 else
 set @result = 1
END

4. Map it to Fetch groups:

5. Fetch the groups and add them into the ODBC Identity Source:

6. Add another user which does not belong to any group:

insert into ISE_Users(username,password) values('odbcuser2','odbcpass'); 

7. Create specific Policy Set and test:

b3560#test aaa group ISE236 odbcuser2 odbcpass legacy 
Attempting authentication test to server-group ISE236 using radius
User authentication request was rejected by server.

b3560#test aaa group ISE236 odbcuser1 odbcpass legacy 
Attempting authentication test to server-group ISE236 using radius
User was successfully authenticated.

Step 5. Configure Attributes Retrieval

1. In order to simplify this example, a flat table is used for attributes:

 CREATE TABLE [dbo].[User_Attributes](
 [user_id] [int] NOT NULL,
 [Attribute_Name] [varchar](max) NOT NULL,
 [Attribute_Value] [varchar](max) NOT NULL
) ON [PRIMARY]

GO

ALTER TABLE [dbo].[User_Attributes] WITH CHECK ADD CONSTRAINT [FK_User_Attributes_ISE_Users] FOREIGN KEY([user_id])
REFERENCES [dbo].[ISE_Users] ([user_id])
ON UPDATE CASCADE
ON DELETE CASCADE
GO

2. Create an attribute for one of the users:

INSERT [dbo].[User_Attributes] ([user_id], [Attribute_Name], [Attribute_Value]) VALUES (2, N'AwsomenessLevel', N'100')
INSERT [dbo].[User_Attributes] ([user_id], [Attribute_Name], [Attribute_Value]) VALUES (2, N'UserType', N'admin')

3. Create stored procedure:

CREATE PROCEDURE [dbo].[ISEAttrsRetrieval]
 @username varchar(255), @result int output
AS
BEGIN
 if exists (select * from ISE_Users where username = @username)
 begin
 set @result = 0
 select attribute_name , attribute_value from user_attributes where USER_ID in(SELECT USER_ID from ISE_Users where username = @username)
 end
 else
 set @result = 1
END

4. Map it to Fetch attributes:

5. Fetch the attributes:

6. Adjust ISE rules:

Troubleshoot

If the connection is not successful, check windows event log. On ISE use command show logging application prrt-management.log tail while attempting to connect.

Example of bad authentication mode:

bise236/admin# sh logg app prrt-management.log tail
2016-06-08 09:03:59,822 WARN [admin-http-pool177][] cisco.cpm.odbcidstore.impl.MSSQLServerDbAccess -:bastien::- Connection to ODBC DB failed. Exception: com.microsoft.sqlserver.jdbc.S
QLServerException: Login failed for user 'babaland\administrator'. ClientConnectionId:c74ade15-4f34-415a-9a94-4c54c58c0fc3
com.microsoft.sqlserver.jdbc.SQLServerException: Login failed for user 'babaland\administrator'. ClientConnectionId:c74ade15-4f34-415a-9a94-4c54c58c0fc3
 at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(SQLServerException.java:216)
 at com.microsoft.sqlserver.jdbc.TDSTokenHandler.onEOF(tdsparser.java:254)
 at com.microsoft.sqlserver.jdbc.TDSParser.parse(tdsparser.java:84)
 at com.microsoft.sqlserver.jdbc.SQLServerConnection.sendLogon(SQLServerConnection.java:2908)
 at com.microsoft.sqlserver.jdbc.SQLServerConnection.logon(SQLServerConnection.java:2234)
 at com.microsoft.sqlserver.jdbc.SQLServerConnection.access$000(SQLServerConnection.java:41)
 at com.microsoft.sqlserver.jdbc.SQLServerConnection$LogonCommand.doExecute(SQLServerConnection.java:2220)
 at com.microsoft.sqlserver.jdbc.TDSCommand.execute(IOBuffer.java:5696)
 at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(SQLServerConnection.java:1715)
 at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(SQLServerConnection.java:1326)

Example of user missing permissions to open database:

2016-06-08 09:13:57,842 WARN [admin-http-pool159][] cisco.cpm.odbcidstore.impl.MSSQLServerDbAccess -:bastien::- Connection to ODBC DB failed. Exception: com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "ISEDB" requested by the login. The login failed. ClientConnectionId:299c2956-6946-4282-b3ca-2aa86642a821
com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "ISEDB" requested by the login. The login failed. ClientConnectionId:299c2956-6946-4282-b3ca-2aa86642a821
 at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(SQLServerException.java:216)
 at com.microsoft.sqlserver.jdbc.TDSTokenHandler.onEOF(tdsparser.java:254)
 at com.microsoft.sqlserver.jdbc.TDSParser.parse(tdsparser.java:84)
 at com.microsoft.sqlserver.jdbc.SQLServerConnection.sendLogon(SQLServerConnection.java:2908)
 at com.microsoft.sqlserver.jdbc.SQLServerConnection.logon(SQLServerConnection.java:2234)
 at com.microsoft.sqlserver.jdbc.SQLServerConnection.access$000(SQLServerConnection.java:41)

In order to troubleshoot DB operations, enable logging components odbc-id-store to DEBUG level under Administration > System > Logging > Debug Log Configuation.

Logs are placed in prrt-management.log file.

Example for odbuser2:

2016-06-08 12:26:56,009 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcIdStore -:::- ODBC ID Store Operation: Authenticate Plain Text Password. Username=odbcuser2, SessionID=0a3027ecLA_rJLKsS5QAzuRvluGWzdYe67rIgcG3MMQcpE8yKnw
2016-06-08 12:26:56,012 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.CustomerLog -:::- Write customer log message: 24852
2016-06-08 12:26:56,012 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcConnectionPool -:::- OdbcConnectionPool - get connection
2016-06-08 12:26:56,012 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcConnectionPool -:::- OdbcConnectionPool - use existing connection
2016-06-08 12:26:56,013 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcConnectionPool -:::- OdbcConnectionPool - connections in use: 1
2016-06-08 12:26:56,013 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Authenticate plain text password
2016-06-08 12:26:56,013 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Prepare stored procedure call, procname=ISEAuthUserPlainReturnsRecordset
2016-06-08 12:26:56,013 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Using recordset to obtain stored procedure result values
2016-06-08 12:26:56,013 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.CustomerLog -:::- Write customer log message: 24855
2016-06-08 12:26:56,013 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Text: {call ISEAuthUserPlainReturnsRecordset(?, ?)}
2016-06-08 12:26:56,013 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Setup stored procedure input parameters, username=odbcuser2, password=***
2016-06-08 12:26:56,014 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Execute stored procedure call
2016-06-08 12:26:56,017 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Process stored procedure results
2016-06-08 12:26:56,017 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Obtain stored procedure results from recordset
2016-06-08 12:26:56,017 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Received result recordset, number of columns=4
2016-06-08 12:26:56,017 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Results successfully parsed from recordset
2016-06-08 12:26:56,018 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcConnectionPool -:::- OdbcConnectionPool - release connection
2016-06-08 12:26:56,018 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcConnectionPool -:::- OdbcConnectionPool - connections in use: 0
2016-06-08 12:26:56,018 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcIdStore -:::- Call to ODBC DB succeeded
2016-06-08 12:26:56,018 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.OdbcAuthResult -:::- Authentication result: code=0, Conection succeeded=false, odbcDbErrorString=No Error, odbcStoredProcedureCustomerErrorString=null, accountInfo=This is a very good user, give him all access, group=11
2016-06-08 12:26:56,019 DEBUG [Thread-4051][] cisco.cpm.odbcidstore.impl.CustomerLog -:::- Write customer log message: 24853
2016-06-08 12:26:56,026 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcIdStore -:::- ODBC ID Store Operation: Get all user groups. Username=odbcuser2, SessionID=0a3027ecLA_rJLKsS5QAzuRvluGWzdYe67rIgcG3MMQcpE8yKnw
2016-06-08 12:26:56,029 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcIdStore -:::- ODBC ID Store Operation: Fetch user groups. Username=odbcuser2, SessionID=0a3027ecLA_rJLKsS5QAzuRvluGWzdYe67rIgcG3MMQcpE8yKnw
2016-06-08 12:26:56,029 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.CustomerLog -:::- Write customer log message: 24869
2016-06-08 12:26:56,029 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnectionPool -:::- OdbcConnectionPool - get connection
2016-06-08 12:26:56,029 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnectionPool -:::- OdbcConnectionPool - use existing connection
2016-06-08 12:26:56,029 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnectionPool -:::- OdbcConnectionPool - connections in use: 1
2016-06-08 12:26:56,029 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Fetch user groups
2016-06-08 12:26:56,029 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Prepare stored procedure call, procname=ISEGroupsRetrieval
2016-06-08 12:26:56,029 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Text: {call ISEGroupsRetrieval(?,?)}
2016-06-08 12:26:56,029 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Setup stored procedure input parameters, username=odbcuser2
2016-06-08 12:26:56,029 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Execute stored procedure call
2016-06-08 12:26:56,031 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Process stored procedure results
2016-06-08 12:26:56,032 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Received epmty result set, no groups/attributes data can be obtained
2016-06-08 12:26:56,032 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Result code indicates success
2016-06-08 12:26:56,033 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnectionPool -:::- OdbcConnectionPool - release connection
2016-06-08 12:26:56,033 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnectionPool -:::- OdbcConnectionPool - connections in use: 0
2016-06-08 12:26:56,033 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcIdStore -:::- Call to ODBC DB succeeded
2016-06-08 12:26:56,033 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.CustomerLog -:::- Write customer log message: 24870
2016-06-08 12:26:56,033 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcIdStore -:::- ODBC ID Store Operation: Get all user groups. Got groups...
2016-06-08 12:26:56,033 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcIdStore -:::- ODBC ID Store Operation: Get all user groups. Username=odbcuser2, ExternalGroups=[]
2016-06-08 12:26:56,033 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcIdStore -:::- ODBC ID Store Operation: Fetch user attributes. Username=odbcuser2, SessionID=0a3027ecLA_rJLKsS5QAzuRvluGWzdYe67rIgcG3MMQcpE8yKnw
2016-06-08 12:26:56,033 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.CustomerLog -:::- Write customer log message: 24872
2016-06-08 12:26:56,033 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnectionPool -:::- OdbcConnectionPool - get connection
2016-06-08 12:26:56,033 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnectionPool -:::- OdbcConnectionPool - use existing connection
2016-06-08 12:26:56,033 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnectionPool -:::- OdbcConnectionPool - connections in use: 1
2016-06-08 12:26:56,033 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Fetch user attributes
2016-06-08 12:26:56,033 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Prepare stored procedure call, procname=ISEAttrsRetrieval
2016-06-08 12:26:56,033 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Text: {call ISEAttrsRetrieval(?,?)}
2016-06-08 12:26:56,033 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Setup stored procedure input parameters, username=odbcuser2
2016-06-08 12:26:56,033 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Execute stored procedure call
2016-06-08 12:26:56,035 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Process stored procedure results
2016-06-08 12:26:56,035 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Received result recordset, total number of columns=2
2016-06-08 12:26:56,035 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- According to column number expect multiple rows (vertical attributes/groups retured result)
2016-06-08 12:26:56,035 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Fetched data: AwsomenessLevel=100
2016-06-08 12:26:56,035 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Fetched data: UserType=admin
2016-06-08 12:26:56,035 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Results successfully parsed from recordset
2016-06-08 12:26:56,035 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnection -:::- Result code indicates success
2016-06-08 12:26:56,036 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnectionPool -:::- OdbcConnectionPool - release connection
2016-06-08 12:26:56,036 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcConnectionPool -:::- OdbcConnectionPool - connections in use: 0
2016-06-08 12:26:56,036 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcIdStore -:::- Call to ODBC DB succeeded
2016-06-08 12:26:56,036 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.CustomerLog -:::- Write customer log message: 24873
2016-06-08 12:26:56,036 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcIdStore -:::- ODBC ID Store Operation: Get all user attrs. Username=odbcuser2, Setting ISE_ODBC.AwsomenessLevel to 100
2016-06-08 12:26:56,036 DEBUG [Thread-84][] cisco.cpm.odbcidstore.impl.OdbcIdStore -:::- ODBC ID Store Operation: Get all user attrs. Username=odbcuser2, Setting ISE_ODBC.UserType to admin